Gotham 10 A SpecSheet
Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
Incandescent Downlights
10” A
Open Reflector
A21, A23 or PS25 Lamp
FEAT URES ORDERING INFORMATION NOTES
OPTICAL SYSTEM
• Reflector: Self-flanged, semi-specular, matte-diffuse or specular reflector.
Patented Bounding Ray™ Optical Principle design (U.S. Patent No. 5,800,050)
provides lamp before lamp image and smooth transition from top of reflector to
bottom. Minimum flange matches reflector finish.
• Baffle: Semi-specular reflector. Microgroove baffle with white painted flange.
MECHANICAL SYSTEM
• 16-gauge galvanized steel mounting/plaster frame with friction support springs
to retain optical system. Accommodates up to 7/8” thick ceiling standard.
• Integral yoke with constant force spring used to retain baffle optical system and
accommodates up to 6” thick ceiling with no additional parts or modifications.
• 16-gauge galvanized steel mounting bars with continuous 4” vertical adjustment are shipped pre-installed. Post installation adjustment possible without
the use of tools from above or below ceiling.
• Galvanized steel junction box with hinged access covers and spring latch. Two
combination 1/2”-3/4” and two 1/2” knockouts for straight-through conduit
runs. Capacity: 8 (4 in, 4 out) No. 12 AWG conductors rated for 90°C.
EXAMPLE: A 10AR
ELECTRICAL SYSTEM
• Die-cast aluminum lampholder housing.
• Medium-base porcelain socket with nickel-plated screw shell.
• Thermally-activated insulation detector.
LISTING
• Fixtures are UL Listed for thru-branch wiring, non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian standards.
WARRANTY
• 1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Series1Aperture/Trim color Finish Lens type Options
A 10AR Clear
10PR Pewter
10UBR Umber
10WTR Wheat
10GR Gold
2
10WR
White painted
2
10MB
Black baffle
2
10WB
White baffle
(blank) Semi-specular
LD Matte-diffuse
LS Specular
(blank) No lens
CGL Clear glass lens
T73 Tempered prismatic lens
SDT Stepdown transformer (277V to 120V)
SF Single fuse
TRW White painted flange
TRBL Black painted flange
GSKT Foam gasketing
4
RRL
RELOC®-ready luminaire. Provides compatibility with Lithonia
RELOC system. Access above ceiling required.
ACCESSORIES order as separate catalog numbers (shipped separately)
SCA10 Sloped ceiling adapter
. Degree of slope must be specified (10D, 15D, 20D, 25D, 30D). Ex: SCA10 10D.
CTA10 YK Trim retention yoke with constant force spring to accommodate ceiling thickness up to 6” (ships standard with MB and WB trims)
ORDERING NOTES
1. Maximum wattage: 150W A21-IF lamp; 200W A23-IF or 300W PS25-IF lamp.
2. Not available with finishes.
3. For compatible RELOC systems, refer to TECH-110.
A-10-OPEN
PAGE 1 OF 3
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 06/26/13. Specifications subject to change without notice.
10” A
Open Reflector
A21, A23 or PS25 Lamp
DIMENSIONAL DATA
All dimensions are inches (centimeters) unless otherwise noted.
17-1/4
(43.8)
16-15/16
(43.0)
Aperture: 9-3/4 (24.8)
Ceiling Opening: 10-3/8 (26.4)
Overlap Trim: 10-3/4 (27.3)
15-7/8
(40.3)
Lens Recess: 4-1/8 (10.5)
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
© 2007-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 06/26/13. Specifications subject to change without notice.
A-10-OPEN
PAGE 2 OF 3
Loading...