Gossen Metrawatt SCANBASE RFID Operating Instructions

Operating Instructions

2

1

3

Distance: appr. 3 cm,
centered above the tag

SCANBASE⏐RFID

RFID Reader / RFID Programmer

Available Models

Article No. Frequency Standard

Z751E 13,56 MHz ISO 15693 USB SECUSTARFM+

Z751G 13,56 MHz ISO 15693 RS 232 SECUTEST ..., SECULIFE ST, SECUTEST PSI, SECUTEST SI+,

Connection

In order to program the RFID tags, the respective
RFID scanner/programmer must be connected to
the PC by using the software which is available
on the attached CD ROM. The operating instruc­tions for the software are also included on the
CD-ROM (standard equipment).

Please note: Z751GA requires a special RS232
cable and power supply unit which are both avail­able from our Customer Service Center. The contact
address is given at the bottom of this page.

SECU

TEST

BASE(10)/PRO

enables the user to write
RFID tags directly from the test instrument by using
the programmer.

Application

LED Function Meaning

1 red flashes check configuration!

2 green continuous light operative

3 yellow

continuous light operative

blinking data reading

Plug-and-play by application with

,

SECULIFE SB, SECUTEST BASE(10)/PRO

MINI

TEST M

ASTER

,

MINI

TEST 3P M

ASTER

3-349-439-15

, PROFI

TEST M

6/2.16

ASTER

Accessories

RFID Reader/Programmer Z751E and Z751G are preassigned to read and write the follow­ing RFID tags:

Article No. Frequency Standard Type of construction Packaging unit

Z751R 13,56 MHz ISO 15693 dia. approx. 22 mm self-adhesive 500 units

Z751S 13,56 MHz ISO 15693 dia. approx. 30 mm, thickness 2 – 3 mm with 3 – 4 mm hole 500 units

Z751T 13,56 MHz ISO 15693 pigeon ring, dia. approx. 7.5 mm 250 units

To use tags in other models please contact our Customer Service Center, for contact details see below.

Edited in Germany • Subject to change without notice • PDF version available on the Internet

GMC-I Messtechnik GmbH
Südwestpark 15
90449 Nürnberg •

Germany

Phone [phone]
Fax [phone]
E-Mail [e-mail]
www.gossenmetrawatt.com