Go Rhino DOMINATOR D2 SERIES, D24105 Installation Instructions Manual

INSTALLATION INSTRUCTIONS

PART NO. D24105 (B-PS)

2009-14 DODGE RAM 1500 CREW CAB P/U 4DR 2/4WD

2010-15 2500, 3500 CREW CAB P/U 4DR 2/4WD

Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!

PACKING LIST

QTY PARTS DESCRIPTION

24 3/8” X 1 ¼” HEX BOLTS
42 3/8” FLAT W ASHERS

30 3/8” LOCK W ASHERS
18 3/8” HEX NUTS

INSTALLATION INSTRUCTIONS

READ THE INSTRUCTIONS COMPLETELY BEFORE YOU BEGIN THE INSTALLATION

OBLONG

HOLE

QTY

6
6
1
1

PARTS DESCRIPTION

4105TP

T-PLATE
D06 SIDE STEP MOUNTING BRACKETS
D24105P
D24105D DRIVER SIDE STEP

PASSENGER

SIDE STEP

HEXAGON SHAPED HOLES

STEP 1. THIS INSTALLATION USES (3) MOUNTING BRACKETS PER SIDE. BEGIN BY INSTALLING THE

PASSENGER SIDE FRONT BRACKET. LOCATE THE (2) HEXAGON SHAPED HOLES IN THE UNDERSIDE OF
THE BODY PANEL AT THE FRONT OF THE CAB AND REMOVE THE TAPE COVERING THE OBLONG HOLE.

BODY PANEL

T-PLATE

STEP 2. INSERT (1) OF THE T-PLATES THROUGH THE OBLONG HOLE IN THE BODY PANEL AND POSITION

THE PLATE INSIDE THE PANEL AS SHOWN.

3/8” FLAT WASHER,

LOCK WASHER & HEX NUT

T-PLATE

3/8” X 1 ¼” HEX

LOCK WASHERS, & FLAT

BOLTS,

WASHERS

STEP 3. ATTACH ONE OF THE MOUNTING BRACKETS TO THE BODY PANEL USING THE T-PLATE (2) 3/8” X 1

¼” HEX BOLTS, (3) 3/8” FLAT WASHERS, (3) 3/8” LOCK WASHERS AND (1) 3/8” HEX NUT. HAND TIGHTEN.

MOUNTING BRACKET