Go Rhino Dominator 2 series, D24052 Installation Instructions Manual

Qty.

Part #

Description

Torque

1 3 C0751

Driver Side Bracket

2 3 C0752

Passenger Side Bracket

3

12

M8-1.25 x 25mm Hex Bolt

15 Ft. Lbs.

7

12

5/16" Lock Washer

8

12

3/8"-16 x 1-1/4" Hex Bolt

30 Ft. Lbs.

9

12

3/8" Hex Nut

10

24

3/8" Flat Washer

13 1 D24050P

Passenger Side Step

Installation Instructions

#1

#2

Dominator 2 Side Steps P art # D24052 (B-PS)

2014 Chevrolet Silverado 1500 Crew Cab

Do not attempt to install this produc t o n any vehicle other than the one listed above!

Parts List

4 4 M8-1.25 Hex Nut
5 4 M8-1.25 U-Nut
6 16 5/16" Flat Washer

11 12 3/8" Lock Washer
12 1 D24050D Driver Side Step

Driver Side

Passenger

Side

Tool Required:

13mm & 9/16” Socket
13mm & 9/16” Wrench
Ratchet & Ratchet Extension
Tape Rule
Approximate installation time: 60 min

In

#2

#1

#3

14”

stallation

Step-1 This installation uses three brackets per side. Begin by installing the driver side front bracket. Measure

from the front fender bolt rearward approximately 14”, (Photo 1) and locate the M8 nut welded to the body pinch
mold and the M8 threaded insert in the rocker panel, (Photo 2).

Driver Side

Driver Side

Step-2 Attach one of the driver side brackets to the rocker panel and pinch mold using (2) M8 hex bolts, (2) 5/16”
lock washers and (2) 5/16” flat washers. Leave the bolts loose for final adjustment, (Photo 3).

Driver Side