Go Rhino dominator 2 series, D24043 Installation Instructions Manual

Qty.

Part #

Description

Torque

1 3 C0751

Driver S ide Bracket

2 3 C0752

Passenger Side Bracket

3

12

M8-1.25 x 25mm Hex Bolt

15 Ft. Lbs.

4 6 M8-1.25 Hex Nut

5 6 M8-1.25 U-Nut

6

18

5/16" Flat Washer

7

12

5/16" Lock Washer

8

12

3/8"-16 x 1-1/4" Hex Bolt

30 Ft. Lbs.

9

12

3/8" Hex Nut

10

24

3/8" Flat Washer

11

12

3/8" Lock Washer

12 1 D24043D

Driver S ide Step

13 1 D24043P

Pas senger Side Step

Installation Instructions

Do not attempt to install this product on any vehicle other than the one listed above!

#1

#2

Dominator 2 Side Steps P art # D24043 (B-PS)

2014-2015 Chevrolet Silverado & GMC Sierra 1500 Double Cab

2015 Chevrolet Silverado & GMC Sierra 2500HD, 3500H D Double Cab

Part s List

Driver Side

Tool Required:

13mm & 9/16” Socket
13mm & 9/16” Wrench
Ratchet & Ratchet Extension
Tape Rule

Approximate instal lation time: 60 min

Passenger

Side

Installation

#2

#1

#3

14”

This installation uses three brackets per side. Begin by installing the driver side front bracket.

Step-1 Measure fr om the front fen der bol t rear ward appr ox imately 14”, (Photo 1) and locate the hole in the body
pinch mold and the plastic plug in the rocker panel, (Photo 2). Remove the plastic plug from the rocker panel and
install (1) M8 U-Nut in the rocker panel, (Photo 2).

Driver Side

Driver Side

Step-2 Attach one of the driver side brackets to the rocker panel using the U-Nut, (1) M8 hex bolt, (1) 5/16” lock

washer and (1) 5/16” flat washer, and to the pinch mold using (1) M8 hex bolt, (2) 5/16” flat washers, (1) 5/16”
lock washer, and (1) M8 hex nut. Leave the nut and bolts loose for final adjustment, (Photo 3).

Driver Side