Gorenje R6192KX User Manual
EN
Instruction manual
Refrigerator
We thank you for the confi dence you have shown by purchasing our appliance.
We wish you fi nd a lot of pleasure in its use.
The appliance is intended solely for household use.
The refrigerator is intended for storing fresh food at temperatures above 0°C.
459922
Important notes and warnings ...................................3
Advice for saving power with refrigeration
appliances .................................................................... 5
Appliance description ................................................. 6
Installation and connection ........................................ 7
Changing the direction of door opening ...................9
Operating the appliance with mechanic controls... 13
Operating the appliance with electronic controls .. 14
Appliance interior equipment ...................................19
Recommended distribution
of food in the appliance ............................................ 23
Storing food in the refrigerator ................................ 24
Storing food in the FreshZone drawer ....................25
Defrosting the appliance ...........................................26
Cleaning the appliance .............................................26
Troubleshooting ........................................................ 27
Information about appliance noise .......................... 28
2
Important notes and warnings
• This appliance can be used by children aged from
8 years and above and persons with reduced
physical, sensory or metal capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be
made by children without supervision.
• Before connecting the appliance to the power
mains, please read carefully the instructions
for use which describe the appliance and its
correct and safe use. The instructions apply for
several appliance types/models; thus, settings or
equipment may be described herein which is not
available in your appliance.
• Remove the packaging intended for protecting the
appliance or particular parts during transport.
• Spacers are fi tted on the corners of the doors.
Remove them and insert the supplied plugs into
their slots (only in some models).
• Before connecting the appliance to the power
mains, let the appliance rest in a vertical position
for approximately 2 hours. This will reduce the
possibility of operation faults due to the effect of
transport on the cooling system.
• The appliance must be connected to the power
mains and grounded in compliance with the
effective standards and regulations.
• The appliance may not be used outdoors and it
may not be exposed to rain.
• Before cleaning the appliance, unplug the
appliance from the power mains (unplug the
power cord from the wall outlet).
• If the power cord is damaged, it must be replaced
by a service technician or other adequately
trained person.
• If the appliance will be out of use for a prolonged
period of time, switch it off using the relevant
button, and unplug the appliance from the power
mains. Empty the appliance, defrost it, clean it,
and leave the door ajar.
459922
3
• If LED lighting does not work, call a service technician. Do not attempt a
repair of the LED lighting yourself, as there is danger of contact with high
voltage!
• To protect the environment, take the obsolete appliance to an authorized
home appliance collection center.
• Packaging is made of environmentally friendly materials that can be recycled,
disposed of, or destroyed without any hazard to the environment.
• Do not let the children play with the appliance.
• Cleaning and user maintenance shall not be made by children without
supervision.
• Rating plate can be found in the appliance interior. If the language on the
rating plate is not the language of your choice or the language of your country,
replace it with the one supplied.
• WARNING! Ventilation openings on the appliance or
built-in cupboard must be kept clean and unobstructed
at all times.
• WARNING! Do not use any mechanical accessories or
other methods to defrost the appliance, except for those
expressly recommended by the manufacturer.
• WARNING! During installation, cleaning, and removal
of appliance, be careful not to damage the insulation of
the parts of the cooling system. This will also prevent
pollution.
• WARNING! Do not use any electric devices inside
the appliance, except for those allowed by the
manufacturer of this refrigeration appliance.
The symbol on the product or its packaging indicates that the product should not be
treated as normal household waste. The product should be taken to an authorized
collection center for waste electric and electronic equipment processing. Correct
disposal of the product will help prevent any negative effects on the environment and
health of people which could occur in case of incorrect product removal. For detailed
information on removal and processing of the product, please contact the relevant
municipal body in charge of waste management, your waste disposal service, or the store
where you bought the product.
459922
4
Advice for saving power with refrigeration
appliances
• Install the appliance as specifi ed in the instruction manual.
• Do not open the door more often than necessary.
• Occasionally make sure air circulation underneath the appliance is unobstructed.
• Condenser unit on the rear wall should be kept clean (see chapter Cleaning the appliance).
• If the gasket is damaged or does not provide a perfect seal for other reasons, have it replaced as
soon as possible.
• Store the food in tightly sealed containers or appropriate packaging.
• Before placing the food in the appliance, cool it to room temperature.
• Defrost frozen food in the refrigerator compartment.
• Remove the drawers from the freezer compartment as described in the instruction manual, in
order to make use of the entire interior.
• Defrost your conventional freezer when an approximately 3-5 milimeter layer of of frost or ice has
built up on the refrigerated surfaces.
• Make sure the layout of shelves in the compartment is uniform and that the food is placed so that
the air can freely circulate in the appliance interior (observe the recommended placement of food
as described in the instructions).
• In appliances with a fan, do not block the fan slots.
• If you do not need the fan or the ionizer, switch them off to reduce power consumption.
459922
5
Appliance description
1
2
3
4
5
6
7
1 Control unit
2 Led lighting of refrigerator
interior
3 Fan with air ionizer (+ on/off
switch)*
4 Bottle rack*
5 Pull-out glass shelf (height
9
10
adjustable)
6 FreshZone drawer*
7 CrispZone fruit and vegetables
drawer with humidity control
8 Fruit and vegetables drawer
9 SimpleSlide height-adjustable
door bin
10 Multibox storage bin*
11 Bottle bin
12 Foot
13 Caster*
11
8
13
12
• Appliance interior equipment may change according to the appliance model.
• The drawers are protected against pulling out. To remove a drawer from the appliance, open it,
then lift the front part and pull it out.
• Some models also feature a control unit on the door.
* Only in some models
459922
12
6
Installation and connection
Selecting the room
Installing the appliance
max
30 mm
• Install the appliance in a dry and well ventilated room. The
appliance will operate correctly if the environment temperature
is in the interval specifi ed in the table. The appliance class is
indicated on the rating plate / label with the basic information
on the appliance.
Class Temperature
SN (subnormal) from +10°C to +32°C
N (normal) from +16°C to +32°C
ST (subtropical) from +16°C to +38°C
T (tropical) from +16°C to +43°C
Warning: Make sure the room where the appliance is installed is
large enough. There should be at least 1 m
3
of space per
8 grams of refrigerant. Amount of refrigerant is stated on the
rating plate in the appliance interior.
Appliance installation should be carried out by at least two
persons to avoid any physical injury or damage to the appliance.
• The appliance must stand level or tilted slightly to the back,
stable on a solid base. At the front, the appliance is fi tted with
> 90°
two adjustable legs that can be used to level the appliance. At
the rear side, casters allow for easier installation of the
appliance (only with some models).
• There should be a clearance of at least 5 cm between the
appliance and any cupboard installed above it, in order to
allow adequate cooling of the condenser unit.
• The appliance is supplied with two spacers which should
be installed on the lower part of the housing to prevent from
pushing the appliance too close to the wall. Appliance may
also be installed without the spacers; however, this may
increase power consumption.
• Do not expose the appliance to direct sunlight and do not
place it near any source of heat. If this cannot be avoided,
install an insulation panel.
459922
7
688 mm
• The appliance may stand alone or it may be placed ext to a
cupboard or a wall. Consider the clearance required to fully
open the door in order to allow pulling out the drawers and
shelves (see installation diagram).
600 mm
640 mm
201 mm
1
Connecting the
appliance
459922
8
max 90°
644 mm
1249 mm
Note: When placing the appliances side by side, the anti-dew
(anti-condensation) set has to be purchased and installed!
Code for ordering the set:
– appliances with a height of 1850 mm: 576604.
• Connect the appliance to the power mains using a connection
cable. The wall outlet should be fi tted with a ground contact
(safety socket). Nominal voltage and frequency are indicated
on the rating plate/label with basic information on the
appliance.
• The appliance must be connected to the power mains and
grounded in compliance with the effective standards and
regulations. The appliance will withstand short-term deviations
from the nominal voltage, but not more than +/- 6%.
1
2
3
4
Changing the direction of door opening
Version I – controls in
the appliance interior
Tools required: socket wrench No. 8, Phillips screwdriver, torx 25, fl at screwdriver
The procedure to change the direction of door opening should be carried out by at least two
persons.
1. Remove the upper hinge cover (A) and the covering cap (G).
2. Undo the upper hinge (B) and remove the door (C) from the lower hinge (D).
3. Tilt the appliance backwards (make sure you do not press against the condenser unit on the
rear wall of the appliance as this may damage the cooling system), unscrew the lower hinge (D)
and the foot (E), and move them to the opposite side. Make sure the washer is installed like it
was before disassembly.
4. Move the door hinges (F) to the opposite side and replace the door (C) back on the lower hinge (D).
5. Use the screws to attach the upper hinge (B) on the opposite side.
6. Replace the upper hinge cover (A) and the covering cap (G) on the opposite side.
7. Replacing the handle (H): remove the handle covering caps, undo the screws, and remove
the handle. Remove the hole plugs on the opposite side of the door and attach the handle.
Replace the covering caps on the handle. Insert the new hole plugs supplied in the bag with the
instruction manual into the holes where the handle was initially attached.
Replacing the hinged handle:
- Push a small screwdriver into the handle
slot as indicated in Figure 1 and remove
the cover.
- Remove the caps on the opposite side of
the door.
- Undo the three screws, making sure not
to disassemble the handle.
- Rotate the handle by 180° as indicated in
Figure 3 and attach it to the opposite
side of the door.
- Replace the cover and the caps.
459922
9
Loading...