Gorenje G640UX, GW761UX, GTW641UB, GT641UW, GTW951UB Instruction Manual

2

Dear customer!

This electric integrated gas cooker is manufactured for household use.
Our appliances are packed in the environmentally friendly materials which may be
recycled, deposited or destroyed without any hazard to the environment. Such
packaging materials are also labeled accordingly.
Once the life cycle your appliance is over, make sure not to pollute the environment,
and deliver it to the authorized collectors of old household appliances.

Instructions for use

Instructions for use have been prepared for the user, and describe the appliance and
the way it is handled. These instructions are intended for various types of the
appliance, so you may find some descriptions for the functions that your
particular appliance may not have.

These instructions are only valid of the country symbol is indicated on the appliance.
If there is NO county symbol in the appliance, technical instructions should be
observed for adapting the appliance to comply with the requirements and regulations
for use in your country.

Instructions for

connection

The appliance must be connected in compliance with the instructions attached to it,
as well as in compliance with relevant regulations and standards. The connection
may only be performed by a qualified person.

Ra

ting plate

The rating plate indicating the basic information on the appliance is attached to the
lower side of the hob.

Important warnings

3

Installation

4

Connecting the appliance to the power mains

5

Connecting the cooking hob to t

he gas supply

6

Nozzle table

8

Technical information

8

Appliance description

10

Cleaning and maintenance

12

Special warnings and fault reporting

14

3

TECHNICAL INSTRUCTIONS AND INSTALLATION

Important warnings

• Installation of the appliance into a kitchen worktop and its connection to the power
mains and the gas supply may only be performed by an adequately qualified
technician.

• When the appliance is in use, additional heat and moisture are emitted into the
room. When the appliance is used for a prolonged period of time at a high
performance level, intensive ventilation or use of kitchen hood may is required in the
room where the appliance is installed.

• Do not use the gas burners, if the flame seems unstable.

• If you smell gas in the room, immediately close the gas supply valve either on the
gas bottle or gas pipeline, extinguish all sources of open fi re (including cigarettes),
aerate the room, do not turn on any electric appliances, and call a natural gas
expert.

• The main gas supply valve should also be closed if gas burners will be out of use
for a long period of time (e.g. when going on holiday).

• Do not leave small children unattended when the appliance is in operation. Risk of
burning and scalding!

• During cooking, the overheated fat or oil on the hob may ignite. There is a risk of
burning and fire; therefore, control the cooking process at all times.

• Do not use the cooking hob for room heating.

•Do not place empty pans on the hob.

• Make sure that the parts of the burners are correctly positioned / installed.

• Glass ceramic hobs should not be used as a worktop. Sharp objects may cause
scratches.

• Preparing food in thin aluminum of plastic containers on hot cooking zones is not
allowed. Do not place any plastic objects or aluminum foil on the glass ceramic hob.

• If there is a wall power outlet located near the hob and another appliance is
plugged into it, make sure the power cord does not come into contact with the hot
cooking zones.

• Do not store any temperature-sensitive objects, materials, or substances
underneath the hob, e.g. detergents, sprays, etc.

• Do not use the glass ceramic hob if it is cracked or broken. If any visible crack
appears, immediately unplug disconnect the appliance from the power supply to
avoid the possibility of electric shock.

• In case of a failure of the appliance, immediately disconnect the appliance from the
power mains and contact the service center.

• Do not use steam cleaners or high-pressure cleaners to clean the cooking hob, as
this may result in an electric shock.

• The appliance is manufactured in compliance with the relevant effective safety
standards.

• The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for they safety.

• Children should be supervised to ensure that they do not play with the appliance.

• After a prolonged use of cast iron plates, the area of the plate and the edge of the
cooking zone may discolour. Repair service is not covered by the warranty.

• The hob can not be activated by external timers or remote controls systems.

The symbol on the product or on its packaging indicates that this product may

not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
thisproduct. For more detailed information about recycling of this product,
please contact your local city offi ce, your household waste disposal service
or the shop where you purchased the product.

4

INSTALLA

TION

Important warnings

• Installation of the appliance into a kitchen worktop and its connection to the power
mains may only be performed by an adequately qualified technician.

• Veneer or other fi nish of the piece of kitchen furniture into which the hob is to be
built in should be treated with heat resistant glue (100°C); otherwise, the worktop
finish may be discolored or deformed.

• Cooking hob is dimensioned to be built into the worktop over a piece of kitchen
furniture, with a width of 600 mm or more.

• After installation, the front two fastening elements should be freely accessible from
below.

• The kitchen furniture element underneath the hob should not be fitted with a
drawer. If the kitchen furniture element as a horizontal partition wall, it should be
installed no less than min 20mm from the lower surface of the worktop. The space
between the partition wall and the hob must be empty; no objects should be placed
into that gap.

• Hanging, or wall-mounted kitchen elements should be installed high enough not to
interfere with the work process.

• The distance between the cooking hob and the kitchen hood should be no less
than indicated in the instructions for kitchen hood installation. The minimum distance
is 700 mm.

• The distance between the appliance edge and the adjacent tall kitchen furniture
element should amount to no less than 150 mm.

• Use of massive wood decoration plates or boards on the worktops behind the
cooking hob is permitted, if the minimum distance remains the same as indicated in
the installation drawings.

• Minimum distance between the built-in cooking hob and the rear wall is indicated
on the installation drawing.

• Cooking hobs can be installed into worktops that are 25 to 40 mm thick.
The front part must have an opening of no less than 5 mm.

A (mm)

B (mm)

C (mm)

D (

mm) E (mm)

F (mm)

G (mm)

G640UX 600 510 560 480 45 3 50

GTW641UB 580 510 560 480 40 9 50

GT641UW 580 510 560 480 40 9 50
GW761UX 750 510 720 480 45 3 50

GTW951UB 880 510 860 480 40 9 50

GW951UX 880 510 860 480 45 3 50

GW961UX-SA 880 510 860 480 45 3 50

GTW751UB 750 510 720 480 40 5 50

GT641UB 585 510 560 480 40 9 50

Installing the foam

gasket

Before inserting the appliance into the opening in the kitchen worktop, the supplied
foam gasket must be attached to the lower side of the glass ceramic (glass) cooking
hob (see fi gure above).

Do not install the appliance without the foam gasket!

5

The gasket should be atta

ched to the appliance in the

following way:

- Remove the protective film from the gasket.

- Then, attach the gasket to the lower side of the glass, approximately 2-3
millimetres from the edge (as shown in the figure). The gasket must be attached
along the entire length of the glass edge and should not overlap at the corners.

- When installing the gasket, make sure that the glass does not come into contact
with any sharp objects.

Kitchen worktop cutoff

dimensions

• Only ovens fitted with a cooling fan may be installed underneath this cooking hob.

• Before installing an oven, the rear wall of the kitchen furniture element should be
removed in the area of the cooking hob cutout. Furthermore, a gap of at least 5 mm
should be left at the front side.

Installation procedure

(with springs)

• Worktop must be placed absolutely horizontal.

• Suitably protect the edges of the cut aperture.

• Connect the cooking hob to the mains power supply (see instructions for the
connection of the cooking hob to mains power supply).

• Put the supplied springs in their places.

• Insert the hob into the cut aperture.

• Press the hob firmly towards the worktop from above.

Installation procedure

(with fixing brackets)

The cook top is fixed to the unit by means of the brackets and accessories provided.
Holes are provided in the bottom of the tray where the self-threading plates (A) are
inserted so that you can attach the screws (C) that hold the brackets (B) in place.

A = plates for inserting on the bottom
of the cook top

B = fixing bracket
C = screw

CONNECTING

THE APPLIANCE TO THE POWER MAINS

• The appliance may only be connected by an authorized skilled technician.

• Electric system protection should comply with all relevant regulations.

• The connection clips can be accessed when the connection clip covers are opened
/ removed.

• Before connecting the appliance, make sure the voltage indicated on the rating
plate is consistent with the voltage in your home circuit.

• The rating plate with basic information is attached on the lower side of the hob.

• The appliance is manufactured for use with the power supply voltage
220-240 V ~.

• In order to make a fixed connection to the mains, insert an all-pole circuit breaker
between the appliance and the mains. This device shall have a contact separation in
all poles, providing full disconnection under overvoltage category III conditions.

• Given the protection from the risk of fire, appliances of this type may be installed in
a worktop next to a piece of kitchen furniture that is taller than the appliance (when
installed); however, in this case, a kitchen furniture element must be installed on the
other side, adjacent to the appliance.

• The current conducting and isolated parts must be protected from any possibility of
direct contact.