Gordon Tool 94878 User Manual
5 TIER
®
FOOD DEHYDRATOR
94878
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
Electrical Requirements 120 V~, 60 Hz, 165 Watts
On/Off Switch Rocker Switch
Cord Length 33” Long
Overall Dimensions 13-1/2” Dia. x 8-1/4” H
Weight 6.75 lb.
Features: 1 Ventable See-Through Lid
5 Adjustable Removable Trays
E244492
HOUSEHOLD USE ONLY
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
IMPORTANT SAFEGUARDS
READ AND UNDERSTAND ALL INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed including the following:
1.
2.
3.
4.
5.
6.
Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against electrical shock do not immerse cord, plugs, or the main unit
in water or other liquid. Only the Top Cover (2), the four Dehydrator Trays (3), and
anything else that may touch the food, may be immersed for cleaning. Thoroughly
clean and dry these parts prior to first use and before every subsequent use.
Close supervision is necessary when any appliance is used by or near chil-
dren.
Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts.
Do not operate any appliance with a damaged cord or plug or after the appli-
ance malfunctions or has been damaged in any manner. Return appliance to
the nearest authorized service facility for examination, repair, or adjustment.
7.
SKU 94878 For technical questions, please call 1-800-444-3353. Page 2
The use of accessory attachments not recommended by the appliance manu-
facturer may cause injuries.
8.
Do not use outdoors.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Extreme caution must be used when moving an appliance.
Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to “off”, then remove plug from wall outlet.
Do not use appliance for other than intended use.
This appliance has a polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. To reduce the risk of electric
shock, this plug is intended to fit into a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not change the plug in any way.
Maintain labels and nameplates on the Dehydrator. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
Use personal safety devices, they reduce the risk for injury. Always wear oven
mittens when handling hot cookware.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of ob-
structions and other debris. Do not use this product in a damp or wet location.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Do not touch hot surfaces. Use handles or knobs and oven mittens.
Do not use metal utensils with the Dehydrator. They may cause fire and the
risk of electric shock.
Do not operate the Dehydrator near draperies, curtains, and walls. These
flammable materials may catch fire from this electric appliance.
Always unplug the Dehydrator from its electrical outlet and allow the product
to cool completely before performing any inspection, maintenance, or clean-
ing procedures.
Do not clean with metal scouring pads. Metal pieces can break off the pads and
touch electrical parts involving risk of shock.
Do not store anything other than the manufacturer’s recommended acces-
sories in this unit when not in use.
Keep bystanders and children at a distance while operating the Dehydrator.
Before first use and after every use, thoroughly clean the Dehydrator.
CAUTION: Do not immerse in water.
SKU 94878 For technical questions, please call 1-800-444-3353. Page 3
27.
The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
SAVE THESE INSTRUCTIONS.
Power Cord Safety
1. A short power supply cord is to be provided to reduce risks resulting from becoming
entangled in or tripping over a longer cord.
2. Longer extension cords are available and may be used if care is exercised in their
use.
3. If a long extension cord is used,
a. the marked electrical rating of the (detachable power supply cord or)
extension cord should be at least as great as the electrical rating of the
appliance,
b. if the appliance is of the grounded type, the extension cord should be a
grounding type 3-wire cord, and
c. the longer cord should be arranged so that it will not drape over the
counter top or tabletop where it can be pulled on by children or tripped
over.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List at the
end of this manual are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
SKU 94878 For technical questions, please call 1-800-444-3353. Page 4
OPERATING INSTRUCTIONS
Note: For additional information regarding the parts listed in the following pages, refer to
the Assembly Diagram at the end of this manual.
Note: Before using, wash the Top Cover (2) and the four Mesh Trays (3) in hot, soapy
water, taking care to rinse completely. Dry with a soft cloth. Wipe the base
with a soft clean cloth or sponge. NEVER IMMERSE BASE, CORD OR PLUG
IN WATER OR ANY OTHER LIQUID.
1.
Before using, make sure the Dehydrator unit is in the OFF position and unplugged.
See FIGURE 1 and the Assembly Drawing on page 9.
Mesh Tray (3)
Base Assembly
Power Switch (11)
2.
Clean all parts before assembling. Always wash the Trays (3) and Top Cover (2)
before each use. This will prevent food contamination.
FIGURE 1
Top Cover (1)
3.
Place the base assembly on a flat, smooth surface near an electrical outlet.
SKU 94878 For technical questions, please call 1-800-444-3353. Page 5
4.
Prepare, pretreat, and/or precook the food to be used in the Dehydrator.
Preparation depends on the type of food to be dried. Some food will need to have
the outer layer peeled before dehydration.
Pretreating: Fruits and Vegetables
The enzymes that are responsible for color, flavor and texture, change during the
life of the produce. This process will continue during drying and storage unless the
activity is slowed down. The following information offers some methods which you
may choose to use to impact this process.
Blanching:
a.
Plunge the fruit or vegetables into boiling water for one or two minutes. Place
in ice water to cool. Blot to remove excess moisture before drying.
Steam Blanch:
b.
Use steam for about four (4) minutes and then place in ice water to cool. Blot
to remove excess moisture before drying.
Fruit Dip:
c.
Plunge the fruit into lemon or pineapple juice for two to three minutes. Blot and
place on the tray. You may also use lime juice, orange juice, honey or gelatin.
Sodium Bisulfate:
d.
Use a USP (United States Pharmacopeia) grade of this solution. Dissolve one
teaspoon in one quart of water. This will help to maintain the food’s natural color.
Blot to remove excess moisture before drying.
5.
6.
7.
Precooking: Meat
WARNING! This unit is to be used only on meat that has been precooked
properly. This unit will NOT heat raw meats enough to kill the bacteria and
other pathogens present. Steam, roast, or otherwise heat all pieces of meat to
an internal temperature of at least 160° F (165° F for poultry).
Refer to the USDA’s website for additional jerky food safety tips:
http://www.fsis.usda.gov/Fact_Sheets/Jerky_and_Food_Safety/index.asp
More than one type of food may be placed on each tray. However, do not mix meat
and fruits/vegetables on the same tray or place a tray with meat over a tray with
fruits/vegetables. Do not overlap food or overload trays. Note: When the unit is
plugged in, it’s warming element will constantly be on. When you are finished,
unplug the unit to turn it off.
After the food is arranged on a tray, do not place on the base yet. STACK UP AND
SET ASIDE.
Plug the unit into an electrical wall outlet, turn the Power Switch (11) to the ON
position and allow the unit to preheat for approximately 5 minutes.
SKU 94878 For technical questions, please call 1-800-444-3353. Page 6
Loading...