Gordon 93140 Assembly And Operating Instructions Manual

AUTOMATIC SOAP DISPENSER

®

16.9 FLUID OUNCE CAPACITY

Model 93140

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO HELP PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Copyright © 2005 by Harbor Freight Tools®. All rights reserved. No portion of this

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

PRODUCT SPECIFICATIONS

Item Description

Electrical Requirements Requires 4 “AA” batteries (not included)
Product Compatibility May be used with liquid soap, shampoo, or lotion

* See Warnings
Storage Capacity Approximately 16.9 Fluid ounces
Infra-red Sensor Range Approximately 1/2” to 4”
Dimensions 8-1/2” High x 5-1/2” Deep x 7-1/4” Wide
Additional Features May be used with stand or mounted on wall
Unit Weight 1.50 Pounds

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts Lists on page 7
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.

GENERAL SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed in this

manual may result in serious injury.

SAVE THESE INSTRUCTIONS

SKU 93140

PAGE 2For technical questions, please call 1-800-444-3353.

1. This product is designed for use with liquid soap, shampoo, or lotion only.
Never use chemicals or other toxic liquids.

2. Always wear eye protection. Wear ANSI approved safety impact

goggles when assembling and installing this product.

3. Do not force the product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is
designed.

4. Remove the batteries from the Soap Dispenser before making any
adjustments, changing accessories, or storing the unit. Such preventive
safety measures reduce the risk of starting the unit accidentally.

5. Check for misalignment or binding of moving parts, broken parts, and any

other condition that may affect the Soap Dispenser’s operation. If
damaged, have the unit serviced before using.

6. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one Soap Dispenser may become

hazardous when used on another Soap Dispenser.

7. Product service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could result in
a risk of injury.

8. When servicing the Soap Dispenser, use only identical replacement parts.

Follow instructions in the

“Inspection, Maintenance, And Cleaning”

section

of this manual. Use of unauthorized parts or failure to follow maintenance

instructions may create a risk of electric shock or injury.

9. Maintain labels and nameplates on the Soap Dispenser. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.

10. Use the right product for the job. There are certain applications for which this
product was designed. Do not use small equipment, tools, or attachments to do
the work of larger industrial equipment, tools, or attachments. Do not use this
product for a purpose for which it was not intended.

11. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.

SKU 93140 For technical questions, please call 1-800-444-3353. PAGE 3