Gordon 45845 Operating Information Manual
®
g
ordon
SPOTLIGHT
500,000 CANDLE POWER W/SWIVEL HANDLE
Model 45845
OPERATING INFORMATION
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright 2001 by Harbor Freight Tools®. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form with-
out the express written consent of Harbor F reight Tools.
For technical questions please call 1-800-444-3353
SPECIFICATIONS TABLE
Item Description
Candle Power 500,000
Bulb Type Quartz Halogen
Battery Charging Requirements AC/DC Charging
8-10 Hours Charging Time
Battery Type 6V Sealed Lead Acid
Battery Life (When Fully
Charged)
Transformer Cord Length 6’6”
Lighter Adapter Cord Length 5’2”
Lens Diameter 3-3/4”
Overall Dimensions 5-3/8” W x 8-1/2” L x 7-1/2” H
Weight 3.30 Lbs.
30 Minutes Continuous Use
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, operating,
inspection, maintenance, and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the
inside of the front cover. Keep this manual and invoice in a safe and dry place for
future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1. KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas
invite injuries.
2. KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3. STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment and
keep out of reach of children.
4. DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5. USE EYE PROTECTION. Wear ANSI approved safety impact eye glasses when
using this product. ANSI approved safety impact eye glasses are available from
Harbor Freight Tools.
SKU 45845 PAGE 2
6. DRESS SAFELY. Non-skid footwear or safety shoes should be used when
working with this product. Do not wear loose clothing or jewelry as they can
become caught in moving parts. Wear a protective hair covering to prevent long
hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll
sleeves up above elbows.
7. INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
8. DO NOT OVERREACH. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
9. STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not use this product when you are tired or distracted from the job at hand.
10. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect the operation of this product.
Replace or repair damaged or worn parts immediately.
11. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only
identical replacement parts. Only use accessories intended for use with this
product. Approved accessories are available from Harbor Freight Tools.
12. MAINT AIN THIS PRODUCT WITH CARE. Keep this tool clean and dry for better
performance.
13. MAINTENANCE: For your safety, ser vice and maintenance should be performed
regularly by a qualified technician.
14. USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain
applications for which this product was designed. Do not use small equipment,
tools or attachments to do the work of larger industrial equipment, tools or attachments. Do not use this product for a purpose for which it was not intended.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. AVOID INJURY TO THE EYES. DO NOT LOOK DIRECTLY INTO THE
SPOTLIGHT, AND DO NOT POINT THE SPOTLIGHT AT OTHER PEOPLE.
2. DO NOT TOUCH THE GLASS LENS (part #2), AS IT MAY BECOME HOT
DURING OPERATION
3. DO NOT DISASSEMBLE THE BATTERY OR REMOVE ANY PARTS FROM
THE BATTERY AND SURROUNDING CONNECTIONS.
SKU 45845 PAGE 3
Loading...