GoRave RE1 Owner's Manual

A product by

RE1 Wireless Audio Receiver

Levven Electronics Ltd.
9741 – 54 Ave, Edmonton, Alberta T6E 5J4 Canada
Phone [phone]

Visit gorave.com

FCC Compliance Statement

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment uses and can
radiate radio frequency energy. If not installed and operated in accordance with
the instructions, it may interfere with radio communications.

There is no guarantee that interference will not occur in a particular installation.
If this equipment does interfere with radio or television reception, the user may
be able to correct the problem by one or more of the following measures:

• Reorient or relocate the receving antenna

• Increase the distance between the equipment and the receiver

• Use equipment on a circuit to which the receiver is not connected

• Consult your dealer or a qualified radio/television technician for help

WARNING: Only peripherals complying with FCC class B limits may be attached
to this equipment.

Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes
or modifications made to this equipment, not expressly approved by us or autho­rized parties could void the user’s authority to operate the equipment.

IC Statement

This Class B digital device complies with Canadian ICES-003. Cet appareil
numérique de las classe B est conforme á la norme NMB-003 du Canada.

This device and its antenna(s) must not be co-located or operated in conjunc­tion with any other antenna or transmitter.

EU Declaration of Conformity

Levven Electronics Ltd. declares that this device is in compliance with

the essential requirements and other relevant provisions of Directive
2004/108/EC.

Safety Instructions

There are two categories of safety instructions included in this manual:

• Product Warnings, (i.e. what must never be done to assure avoiding those

hazards that could cause bodily injury or property damage); and

• User Directions (i.e. what must always be done to assure the safe use of

your device).

The Safety Instructions in this manual have been categorized with the following
Signal Words:

Danger: indicates that failing to observe the Safety Instructions could result in
death or catastrophic bodily injury.

Warning: indicates that failing to observe the Safety Instructions could result in
serious injury.

Caution: indicates that failing to observe the Safety Instructions could result in
minor injury or property damage.

Note: designates important information related to activities or conditions that
could result in loss of data or damage to your device.

Safe Use and Operation of Your Device

Do not operate this equipment near any sensitive medical devices. This equip­ment emits stray RF energy and will interfere with the reception of signals by
airborne navigational devices or medical devices.

Warning: Use only grounded AC power cords. Immediately disconnect the
power from the unit if it emits an unusual odor, sound or smoke.

Warning: Do not disassemble, repair or make any modifications to your device.
Disassembly could result in bodily injury or property damage.

Warning: Never allow children to play with the device. Misuse and rough han­dling of the device could result in serious bodily injury. Always keep accessories
and components out of the reach of small children as small parts might present
a choking hazard.

Caution: Never raise the sound volume level too high when using your device
with earphones. Excessive sound volume level could cause permanent damage
to your hearing.

Warning: To reduce the risk of fire or electric shock, do not expose the unit to
moisture or water. Do not allow foreign objects into the device’s enclosure. If the
unit is exposed to water or a foreign object penetrates the enclosure, immedi­ately disconnect the power and take the unit to a qualified technician for repairs.

Immediately stop using the device and have it inspected by a qualified techni­cian if:

• The power supply cord or plug has been damanged.

• Objects have penetrated or liquid has been spilled on the unit.

• The unit shows signs of improper operation.

• The unit has been dropped or damaged in any way.

• Do not use this unit near water.

• Allow for a minimum 10 cm or 4 inches or unobstructed clearance around

the unit for proper ventilation.

• Do not place the unit on a bed, sofa rug or similar surface capable of

blocking the ventilating openings in the enclosure.

• Keep the unit away from radiators, heat registers, stoves or other applianc-

es capable of producing heat.

• Only connect the unit to a power supply that matches the type and voltage

specified on the product label.

• Do not modify the supplied power cable. Do not crush, pinch, bend, heat or

damage the power cable in any way.

• Disconnect the unit from power during a lightning storm or if the unit is to

sit unused for a long period of time.

1. Introduction

Unlock big sound from your computers, phones, tablets and televisions. GoRave
RE1 Wireless Audio Receivers receive wireless audio signals via an Audio
Sender plugged into your mobile device or computer. The RE1 decodes the
signal then sends it to an amplifier or speaker from its stereo RCA outputs.

• CD-quality sound from games, movies, video and music apps.

• Instant start – plug in an Audio Sender and press play.

• Low-latency signal gives instant audio response for games and videos.

• No WiFi network needed for audio playback.

• Long 30-foot wireless range means you can keep your device playing with

you as you move about your home.

• Play directly from your device using controls and apps you already know.

• Works with Apple, Android, Windows and MacOS devices.

2. Compatibility

The GoRave RE1 Wireless Audio Receiver is compatible with:

• Windows and Apple computers with standard USB-A port (use a GoRave

SUSB Audio Sender to transmit wireless audio from your computer)

• Android devices with micro-USB port (use SAA Audio Sender)

• Apple devices with Lightning connector (use SAL Audio Sender)

• Apple devices with 30-pin connector (use SA30 Audio Sender)

3. Specifications

• 2 audio channels, 16-bit/48KHz

• Radio operates at 2.4GHz

• RCA output 1.6 to 2.1 Vrms

• Frequency response 20Hz to 20kHz

• THD+N 0.03% @ 1 kHz

• SNR > 91dB A-weighted

• Power requirement: 5-6.5V, 600mA, 100-240VAC

• Dimensions: 3.2” wide x 3.4” deep x 1.1” high

• Weight: 1.5 lb, shipping weight is 5 lb.