Go Power! GP-SW1000 User Manual
Pure Sine Wave Inverter
GPSW-1000
GPSW-2000
GPSW-3000
________________________________________________
Owner’s Manual
GPSW-1000/2000/3000
___________________________________________________________
Table of Contents
Introduction 2
Specifications 3
Name and Main Function 6
Installation 10
Operation 13
Operating Limits 17
Troubleshooting 18
Maintenance 19
Disclaimer of Liability and Warranty 19
1.0 Introduction
The Go Power! Sine Wave series models are used in a wide range of
applications including remote homes, RVs, sailboats, and powerboats. It will
operate most televisions and VCRs, personal computers, small appliances, and
tools such as drills, sanders, grinders, mixers and blenders. The inverter must
have a greater power rating than the load it provides power to. To get the most
out of the power inverter, it must be installed and used properly. Please read the
instructions in this manual before installing and using this model.
2
GPSW-1000/2000/3000
___________________________________________________________
2.0 Specifications
2.1 GPSW-3000 W Inverter
SPECIFICATIONS
Continuous Output Power 3000 W
Surge Rating 6000 W
Output Waveform Pure Sine Wave <3% THD
Output Voltage ± 5% 115 VAC RMS
Input Voltage 10.5 – 15 VDC 21.0-30.0
Efficiency 85-95%
No Load Current Draw / Powersave 2.0A / 0.55A 1.6A / 0.35A
Protection
Low Battery Alarm ± 2% 10.7 V
Low Battery Shut-Down ± 2% 10.3 V 20.6 V
Operating Temperature Range 0 - 40ºC / 32ºF - 104ºF
Storage Temperature Range -30ºC - 70ºC / -22ºF - 158ºF
Cooling Thermostatically Controlled Fan
AC Receptacle Dual GFCI
Remote Port Option Yes
Dimensions (L x W x H) in mm 452 x 208 x 6.5
Dimensions (L x W x H) in inches 17.8 x 8.2 x 6.5
Weight 9.8 kg / 22 lbs
Warranty 2 Years
GPSW-3000 (12V)
Overload, Short Circuit, Reverse Polarity (Fuse),
Over/Under Input Voltage, Over Temperature
GPSW-3000 (24V)
21.4 V
Inverter Install Kits GP-DC-KIT5 GP-DC-KIT3
UPC 8-39085-00070-0 8-39085-00071-7
3
GPSW-1000/2000/3000
___________________________________________________________
2.2 GPSW-2000 W Inverter
SPECIFICATIONS
Continuous Output Power 2000 W
Surge Rating 4000 W
Output Waveform Pure Sine Wave <3% THD
Output Voltage ± 5% 115 VAC RMS
Input Voltage 10.5 – 15 VDC 21.0-30.0
Efficiency 85-92%
No Load Current Draw / Powersave 2.8A / 0.6A 1.5A / 0.3A
Protection
Low Battery Alarm ± 2% 10.7 V
Low Battery Shut-Down ± 2% 10.3 V 20.6 V
Operating Temperature Range 0 - 40ºC / 32ºF - 104ºF
Storage Temperature Range -30ºC - 70ºC / -22ºF - 158ºF
Cooling Thermostatically Controlled Fan
AC Receptacle Dual GFCI
Remote Port Option Yes
Dimensions (L x W x H) in mm 422 x 208 x 166
Dimensions (L x W x H) in inches 16.6 x 8.2 x 6.5
Weight 9.5 kg / 21 lbs
Warranty 2 Years
GPSW-2000 (12V)
Overload, Short Circuit, Reverse Polarity (Fuse),
Over/Under Input Voltage, Over Temperature
GPSW-2000 (24V)
21.4 V
Inverter Install Kits GP-DC-KIT4 GP-DC-KIT3
UPC 8-39085-00068-7 8-39085-00069-4
4
GPSW-1000/2000/3000
___________________________________________________________
2.3 GPSW-1000 W Inverter
SPECIFICATIONS
Continuous Output Power 1000 W
Surge Rating 2000 W
Output Waveform Pure Sine Wave <3% THD
Output Voltage ± 5% 115 VAC RMS
Input Voltage 10.5 – 15 VDC 21.0-30.0
Efficiency 85-92%
No Load Current Draw / Powersave 1.4A / 0.25 A 0.75 A / 0.15 A
Protection
Low Battery Alarm ± 2% 10.7 V
Low Battery Shut-Down ± 2% 10.3 V 20.6 V
Operating Temperature Range 0 - 40ºC / 32ºF - 104ºF
Storage Temperature Range -30ºC - 70ºC / -22ºF - 158ºF
Cooling Thermostatically Controlled Fan
AC Receptacle Dual GFCI
Remote Port Option Yes
Dimensions (L x W x H) in mm 383 x 182 x 89
Dimensions (L x W x H) in inches 15.1 x 7.2 x 3.5
Weight 4.0 kg / 8.8 lbs
Warranty 2 Years
GPSW-1000 (12V)
Overload, Short Circuit, Reverse Polarity (Fuse),
Over/Under Input Voltage, Over Temperature
GPSW-1000 (24V)
21.4 V
Inverter Install Kits GP-DC-KIT2
UPC 8-39085-00067-0 8-39085-00136-3
5
GPSW-1000/2000/3000
___________________________________________________________
3. Name and Main Function
3.1 Front view (GPSW3000 and GPSW2000)
a) Ventilation
b) On / Off switch
c) Input level
d) Load level
e) Status
a.
b.
c.
d.
e.
Ventilation Ports:
Do not obstruct, allow at least one inch for airflow.
ON / OFF switch:
Power ON/OFF switch, leave in the OFF position during installation.
Leave in REMOTE position when using optional remote.
Input Level:
Displays input voltage. Green indicates normal battery level, yellow
indicates mid to low battery level and red indicates under voltage.
Load Level:
Displays AC load watts. Green indicates normal operation; yellow
indicates mid to high operation and red indicates overload levels.
Status Level:
The LED display indicates the power status of the inverter; see section
Operation for more information.
0 5.0
Solid Green: AC power OK
Flashing Green Power Saving Active
Fast Red Blink: Over voltage protection (OVP)
Slow Red Blink: Under voltage protection (UVP)
Intermittent Red Blink: Over temperature protection (OTP)
Solid Red: Overload protection (OLP)
f) Frequency
g) Power save
i) AC outlets
h) Strain relief clamp
6
GPSW-1000/2000/3000
___________________________________________________________
f.
g.
h.
i.
Frequency:
Typical North American setting is 60 Hz. Set dip switch S4 to “0” for 50
Hz and “1” for 60 Hz.
Power Save:
Puts inverter to sleep until a load is present.
Strain Relief Clamp:
Provides strain relief for Hard Wire AC Output option.
AC Outlet:
Ground Fault Protected (GFCI) Outlet sockets available: North America.
3.1.2 Rearview (GPSW3000 and GPSW2000)
Operation of the inverter without a proper ground connection
may result in an electrical safety hazard.
a.
b.
c.
Ventilation port:
Do not obstruct, allow at least one inch for airflow.
Remote Port:
Allows the customer to use any 2 wire switch to turn the inverter ON
and OFF. Ex. Toggle switch or light switch.
Chassis Ground:
7
GPSW-1000/2000/3000
___________________________________________________________
Ground to vehicle chassis using # 8 AWG wire.
d.
Battery terminals:
Connect to 12/24 V battery or other 12/24 V power source. [+] is
positive and [-] is negative. Reverse polarity connection will blow the
internal fuse and may damage inverter permanently.
3.2 GPSW-1000
3.2.1 Front View (GPSW-1000)
a.
b.
c.
d.
e.
ON / OFF switch:
Power ON/OFF switch, leave in the OFF position during installation.
Leave in REMOTE position when using optional remote.
AC Outlet: Ground Fault Protected (GFCI)
Outlet sockets available: North America
Input Level:
Displays input voltage. Green indicates normal battery level, yellow
indicates mid to low battery level and red indicates under voltage.
Load Level:
Displays AC load watts. Green indicates normal operation; yellow
indicates mid to high operation and red indicates overload levels.
Status Level:
The LED display indicates the power status of the inverter; see
section 5.0 Operation for more information.
8
Loading...