Go Power! GP-1750HD User Manual
Go Power! Manual
GP-1750HD GP Inverter
GP-2500 GP Inverter
Go Power! Electric Inc.
PO Box 6033
Victoria, BC V8P 5L4
Tel: 866-247-6527
Fax: 866-607-6527
Email: info@gpelectric.com
Go Power! Modified Sine Wave Inverter
Owner’s Manual
Table of Contents
1. INTRODUCTION..............................................................................................3
2. SPECIFICATIONS...........................................................................................3
3. FEATURES......................................................................................................4
4. INSTALLATION...............................................................................................7
5. OPERATION..................................................................................................10
6. OPERATING LIMITS.....................................................................................11
7. TROUBLESHOOTING ..................................................................................12
Rev3.0 07/04
GPModifiedSWInstallGuide.doc
8. MAINTENANCE.............................................................................................13
9. WARRANTY..................................................................................................13
10. RV SUPPLEMENT.........................................................................................14
Go Power! Electric Inc.
PO Box 6033
Victoria, BC V8P 5L4
Toll Free Tel: 866-247-6527
Toll Free Fax: 866-607-6527
Email: info@gpelectric.com
2
Go Power! Modified Sine Wave Inverter
Owner’s Manual
1. Introduction
The Go Power! Inverter series provides mobile power for people on the go. Run
standard AC appliances wherever you travel. Silent, lightweight and simple to use,
Go Power! Inverters can be used in a wide range of applications including remote
homes, RVs, boats and long haul trucks. It will operate most televisions and VCR's,
personal computers and small appliances including drills, sanders, grinders, mixers,
blenders and microwaves.
To get the most out of your power inverter, it must be installed and used properly.
Please read the instructions in this manual before installing and using your
inverter.
2. Specifications
2.1 GP2500 Inverter 12V
Output 2500 W
Output wave form Modified Sine Wave
Output voltage 120 ± 5 VAC
Regulation ± 5%
DC input voltage 10-15 V
Low battery alarm 10.5V ± 0.5%
Low battery shut-down 10V ± 0.5%
Efficiency 85-90%
Frequency ±1% 60 Hz
No load current 0.77 A
Surge rating 3600 W
Over thermal protection Yes
Two Cooling fans - continuous Yes
Overload protection Yes
Dimensions (LxWxH) 475 x 242 x 89 mm
19” x 9.7” x 3.6”
Net weight 6 kg
13.2 lbs
Inverter Install Kit GP-DC-Kit 4
2.2 GP1750HD Inverter 12V
Output 1500 W
Output wave form Modified Sine Wave
Output voltage 115 VAC
Regulation + 5% -10%
DC input voltage 10-15 V
Low battery alarm 10.7 V ± 0.2
Low battery shut-down 10V ± 0.2
Efficiency 85-90%
Frequency ±1% 60 Hz
No load current 1.0 A
Surge rating (8 seconds) 1750 W
Surge rating (3 seconds) 2000 W
Over thermal protection Yes
Cooling fan – thermal controlled Yes
Overload protection Yes
Dimensions (LxWxH) 480 x 240 x 90 mm
19.2” x 9.6” x 3.6”
Net weight 5.5 kg
12.1 lbs
Inverter Install Kit GP-DC-Kit 3
3
Go Power! Modified Sine Wave Inverter
Owner’s Manual
3. Features
3.1 Front view – GP2500
a) Bar graph meters:
b) AC outlet:
Outlet sockets available: North America
See RV supplement if wiring to breaker panel.
c) Voltage graph.
d) Overload indicator:
e) ON/ OFF switch:
f) Remote ON/ OFF switch:
g) Over Temp. indicator:
b. AC outlets a. Bar graph meters g. Over temp indicator
c. Voltage graph
Display battery voltage and current. Current should be in the green zone for
continuous operation. The inverter will operate for several minutes when the current
is in the yellow zone.
Operation with battery voltage or current in the red zone of a meter will result in
protective shutdown of inverter.
Lights up when inverter shuts down due to overloading. Turn inverter OFF, remove
cause of overload and turn inverter ON to reset.
Leave in the OFF position during installation.
Leave in the OFF position during installation.
Lights up when inverter protects itself against overheating. Inverter shuts down
while indicator is on. Inverter will restart automatically and indicator will turn OFF
when the inverter cools.
e. On/Off switch d. Overload indicator f. Remote On / Off
4
Go Power! Modified Sine Wave Inverter
grap
Owner’s Manual
3.2 Front view – GP1750HD
a. Bar
h meters
b. Over Temp. indicator
f. Remote On/Off
connector
c. AC outlets
d. Overload indicator
e. On/Off
a) Bar graph meters:
Display battery voltage and current. Current should be in the green zone for
continuous operation. The inverter will operate for several minutes when the current
is in the yellow zone.
Operation with battery voltage or current in the red zone of a meter will result in
protective shutdown of inverter.
b) Over Temp. indicator:
Lights up when inverter protects itself against overheating. Inverter shuts down
while indicator is on. Inverter will restart automatically and indicator will turn OFF
when the inverter cools.
c) AC outlet:
Outlet sockets available: North America
See RV supplement if wiring to breaker panel.
d) Overload indicator:
Lights up when inverter shuts down due to overloading. Turn inverter OFF, remove
cause of overload and turn inverter ON to reset.
e) ON/ OFF switch:
Leave in the OFF position during installation.
f) Optional remote plug is on bottom of inverter.
5
Loading...