Study Hub
Operator’s manual
1
2
Warnings and precautions
• The device is not waterproof. Do not soak or submerge.
• The Study Hub may overheat at high temperatures. Keep
the Study Hub out of direct heat and in a well ventilated
environment.
• For individuals with a cardiac pacemaker, implantable
debrillator, medical pump, or other implantable medical
electronic device: the device may use wireless signals
like Bluetooth, Wi-Fi, and cellular connections that could
potentially affect your implantable medical electronic device.
The device is FCC certied for use with implantables. Please
follow the directions for use for your implant. Keep the Study
Hub at least 6 inches from your implantable device. If you
still have concerns regarding your implanted device, please
contact your healthcare provider.
3
1
4
2
Welcome to the Verily Study Hub
The Study Hub charges your sensor devices and syncs the data
to a secure database over a cellular or Wi-Fi connection.
What’s inside
1
Study Hub
2
Power cord
5
Set up the Study Hub
Plug the power cord into the
round port on the back of the
Study Hub.
6
Plug the power cord into an
electrical outlet to provide
power to the Study Hub.
Outlets near an area with good
cellular connection are best
(for example, near a window).
The light next to the connection symbol will ash while
establishing a connection. The Study Hub is ready to sync when
the light changes to solid white, meaning a good connection has
been made. The connection process may take up to 10 minutes
depending on the connection quality.
7
Charge and sync the Study Watch with Study Hub
If you received a Study Watch as part of your study devices, you
can charge and sync the Study Watch using the Study Hub.
Plug the Study Watch’s
charging dock into one of the
USB ports, either on the side
of the Hub or at the back.
8
You can put the dock either
on top of the Study Hub or
to the side.
12:00
Wed Dec 7
Place the Study Watch on the charging dock. The time and date
on the Study Watch should read the same direction as the “V”
on the dock.
9
Connect the Study Hub using Wi-Fi or Bluetooth
As part of the study, your Study Hub may require the use of a
Wi-Fi or Bluetooth connection to sync data. Follow the instructions
provided as part of the study for additional instruction.
Study Hub lighted symbols
The Study Hub has lights next to symbols to help you understand
what the device is doing:
CONNECTION
Flashing white: The Study Hub is looking for a connection.
This may take up to 10 minutes.
Solid white: The Study Hub is connected and ready to sync.
Solid orange: The Study Hub is unable to nd a connection.
Try moving the Study Hub to another location. If that doesn’t
resolve the problem, contact support.
SYNC
Flashing white: The Study Hub is syncing and charging the
sensor device.
Solid white. Sync is complete.
10
ERROR
Solid orange: Something’s wrong. You can try unplugging
the power cord and plugging it back in. If that doesn’t
resolve the problem, contact support.
WI-FI
Flashing white: The Study Hub is looking for a Wi-Fi
connection. This can take a few minutes.
Solid white. The Study Hub is connected and ready
to sync.
Solid orange: The Study Hub wasn’t able to establish
a connection over Wi-Fi. Contact support.
BLUETOOTH
Flashing white: The Study Hub is looking for a Bluetooth
connection. This can take a few minutes.
Solid white. The Study Hub is connected via Bluetooth
and ready to stream.
Solid orange: The Study Hub wasn’t able to establish
a Bluetooth connection. Contact support.
11
Turn lights on and off
After 5 minutes of inactivity, all the lighted symbols will go dark.
You can turn the lights on and off yourself. On the top of the
device, tap the light button .
Supplies, contents, and storage
The devices are supplied in a cardboard box with appropriate
labeling.
Depending on the conguration required for a study, the
packaging may contain one or more devices including accessories
and supplemental labeling. The devices should be stored in a
climate controlled setting.
12
13
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
14
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC CAUTION:
Any changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between
the radiator & your body.
Note: The country code selection is for non-US model only and is
not available to all US model. Per FCC regulation, all WiFi product
marketed in US must xed to US operation channels only.
15
16
Verily Life Sciences LLC
269 East Grand Ave
South San Francisco, CA 94080 USA
953-00710-01 Rev A
Loading...