Google G020F, G020H, G020B User Manual

Regulatory information

The regulatory information, certification, and compliance marks specific to your phone
can be found on your device under setting: Settings > About phone > Regulatory labels.
Additional regulatory and environmental information can be found at g.co/pixel/reg

EMC compliance statement

Important: This device, power adapter, and other in-box accessories have demonstrated
Electromagnetic Compatibility (EMC) compliance under conditions that included the use
of compliant peripheral devices and shielded cables between system components. It is
important that you use compliant peripheral devices and shielded cables between
system components to reduce the possibility of causing interference to radios,
televisions, and other electronic devices.

Federal Communications Commission (FCC) Regulatory Compliance

Note: This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
device generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to radio or
television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the device and receiver.

● Connect the device into an outlet on a circuit different from that to which the

receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Google could void your authority to
operate the device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

Radio Frequency Exposure

This device meets the U.S. FCC's requirements for exposure to radio waves and is
designed and manufactured not to exceed the FCC's emission limits for exposure to
radio frequency (RF) energy. For satisfying FCC RF exposure compliance requirements,
body-worn operations are restricted to belt-clips, holsters or similar accessories that
have no metallic component in the assembly and must provide at least 10 mm
separation between the device, including its antenna, and the user's body.

Specific Absorption Rate (SAR) Information

This device is designed to meet the requirements for exposure to radio waves
established by the FCC.

The Specific Absorption Rate (SAR) limit adopted by the FCC is 1.6 W/kg averaged over
one gram of tissue. The highest SAR value reported to the FCC for this type of device
complies with this limit. Your phone complies with RF specifications when used near
your ear or at a distance of 1.0 cm (0.4 in) from your body. Ensure that the device’s
accessories, such as a device case and device holster, are not composed of metal
components. Keep the device away from your body to meet the distance requirement.