Let’s get
staed.
1
Get the app Do
wnload
and open the app.
2
Finish setup
Follow the on-
finish setting
screen steps to
up your device.
If your device needs to
charge, plug in the charging
cable and a compatible USB
charger.
Lens
Lights
Shuer buon
Charging po
The basics
1. Turn it on
Twist the lens clockwise to sta capturing.
Twist it back to stop.
Pulsing white
light means the
camera is on
1 32
2. Capture clips
Your camera automatically captures clips when
it sees a person or pet up close. To capture
a specic moment, press the shuer buon.
3. View & save
Go to the app to see what your camera
captured. Save clips to Google Photos or
your phone’s gallery.
3
Regulatory information
Regulatory information, certification, and compliance
marks can be found in the mobile app under Settings >
About > Regulatory labels.
FCC Compliance Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
ence in a residential installation. This equipment
interfer
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
ent does cause harmful interference to radio or
equipm
television reception, which can be determined by turning
the equipoment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
EM
C Compliance
Important: This device and power adapter have
demonstrated Electromagnetic Compatibility (EMC)
compliance under conditions that included the use of
compliant peripheral devices and shielded cables
between system components. It is important that you
use compliant peripheral devices and shielded cables
between system components to reduce the possibility
of causing interference to radios, televisions, and other
electronic devices.
Changes or modifications to this product not authorized
Google could void the electromagnetic compatibility
by
(EMC) and wireless compliance and negate your
authority to operate the product.
Radio Frequency Exposure
This device meets the U.S. Federal Communications
Commission's (FCC) requirements for exposure to radio
waves and is designed and manufactured not to exceed
the FCC's emission limits for exposure to
adiofrequency (RF) energy. To comply with FCC RF
r
exposure compliance requirements, this device must
not be co-located or operating in conjunction with any
other antenna or transmitter.
Loading...