GOODWIN TECHNOLOGY WD22A01 User Manual

Instruction Manual

WD22

1

2

4

A smartphone

1.
Wireless Charging Pad

2.
Built-in Wireless Charger

3.
Power Indicator

4.
Charging Input Port

5.

What’s included:

1 x Wireless Charging Pad
1 x USB to Micro-USB charging cable
1 x Instruction Manual

Tech Specica

Input power: DC 5V/1500 mA

•
Output power: 5W

•
Product size: 69 x 9 mm

•
30cm standard white color Micro-USB cable

•

3

tions

5

Instructions:

Use a certied USB adapter, connect the

1.
provided Micro-USB cable to the USB adapter.

a.

Use Micro-USB tip to connect to the input port

b.

on the charging pad.

Charging mobile devices:

2.
Check your phone or tablet supporting

a.

with wireless charging, it will be listed in the
manufacturer’s specications.
Simply place the enabled device atop the

b.

wireless charging pad. Your device should
show the charging indication.
When completely charged, remove the device

c.

from the charging pad.

Note: In order to charge devices, use only the

*

accessory cable or the cable included with your
own device by the manufacturer.

SAFETY PRECAUTIONS:

WARNING–When using this product, basic

1.
precautions should always be followed,
including the following:
Read all the instructions before using the

2.
product.
To reduce the risk of injury, close supervision

3.
is necessary when the product is used near
children.
Do not expose the device to moisture.

4.
Do not use the device in excess of its output

5.
rating. Overload outputs above rating may
result in a risk of re or injury.
Do not use the device if damaged or modied.

6.
Damaged or modied batteries may exhibit

7.
unpredictable behavior resulting in re,
explosion or risk of injury.

8.

Do not disassemble the device. Take it to a
qualied service person when service or repair
is required. Incorrect reassembly may result in
a risk of re or injury.

9.

Do not expose the device to re or excessive
temperature. Exposure to re or temperatures
above 212ºF may cause explosion.
Have servicing performed by a qualied repair

10.
person using only identical replacement parts.

11.

This will ensure that the safety of the product

is maintained.

12.

Do not overcharge phone. Unit may get hot with
excessive use. Remove phone when it is fully
charged. Never charge for more than 7 hours at a
time.
Attachements on the back of your phone can

13.
impede the effectiveness of the wireless charger,
and lead to overheating. Please remove attachments
from the phone before charging on this device.

Caution: Changes or modifications not expressly

*

approved by the party responsible for compliance
could void your authority to operate the equipment.
The device has been evaluated to meet general RF
exposure requirement.
The distance between user and products should be
no less than 20cm.