Wireless Audio / Mic Adapter
User’s Manual
Wireless Audio/ Mic Adapter User’s Manual
ABOUT THIS MANUAL
This manual is designed for use with the Wireless Audio / Mic Adapter. Information in this document
has been carefully checked for accuracy; however, no guarantee is given to the correctness of the
contents. The information in this document is subject to change wit hout notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding the accuracy and
completeness of this document and shall in no event be liable for any loss of profit or any
commercial damage, including but not limited to special, incidental, consequentia l, or other damage.
SAFETY INSTRUCTIONS
Always read the safety instructions carefully:
Keep this User’s Manual for future reference
Keep this equipment away from humidity
If any of the following situation arises, get the equipment checked by a service technician:
The equipment has been exposed to moisture.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
The equipment has not been working well or you cannot get it to work according to the
User’s Manual.
COPYRIGHT
This document contains proprietary information protected by copyright. All right are reserved. No
part of this manual may be reproduced by any mechanical, electronic or other means, in any form,
without prior written permission of the manufacturer.
i
Table of Contents
Table of Contents
1. Introduction....................................................................................................................1
Features.........................................................................................................................2
Package Contents..........................................................................................................2
System Requirements....................................................................................................2
2. Using the Adapter..........................................................................................................3
Hardware Connection.....................................................................................................3
How to Use Your Wireless Audio / Mic Adapter ..............................................................4
3. Specifications.................................................................................................................5
4. Regulatory Compliance.................................................................................................6
FCC Conditions..............................................................................................................6
CE ..................................................................................................................................6
WEEE Information..........................................................................................................6
ii
1. Introduction
This Wireless Audio / Mic Adapter enables you to not only transmit audio from your
PC or Notebook one side to the other side wirelessly but also transmit your voice
back from the other side to PC or Notebook side in the same room. Without messy
wires, just connect USB audio dongle to your PC or Notebook and connect wireless
audio box to your stereo’s speaker or microphone speak, you will enjoy the good
quality of the sounds.
You can also use the mobile strap to hang up the wireless audio box. The audio box
can be taken as a MP3 player for personal enjoyment or as a VoIP soft-phone
application. It’s a more flexible for users since they don’t need to worry about the
Introduction
distance limitation.
This Wireless Audio / Mic Adapter adopt the RF 2.4G wireless solutions and bundled
with USB transmitter dongle and receiver box. The transmitter distance can be
extended up to 10 meters. It is also compatible with Windows®2000, XP SP2, Vista™
32/64-bit, Windows® 7 and Mac OS X v10.x or later operation system.
1
Wireless Audio / Mic Adapter User’s Manual
Features
No more wires, and less cable clutter
Proprietary 2.4GHz Wireless solution
Easy system expansion with stereo sound support
Hands-free communication.
Plug and play, quick and convenient use, no driver / software installation.
Low power consumption / Low audio noise
Support 1-1 Broadcasting
Volume controlled through your computer or manually on the adapter
Package Contents
Wireless Audio Dongle x1
Wireless Audio Box x1
User’s Manual x1
AAA Battery x1
Mobile Strap x1
Power Adapter (Optional) x1
System Requirements
The minimum requirements for the PC are:
Intel Pentium III or AMD K6 500 CPU above
At least 128MB RAM
At least 50 MB hard disk space
PC or Mac with one USB port
With one of the following operating systems：
Windows 2000, XP , Vista and Windows 7,
Mac OS X v10.x or later
2
2. Using the Adapter
Hardware Connection
2. Using the Adapter
3
Wireless Audio / Mic Adapter User’s Manual
How to Use Your Wireless Audio / Mic Adapter
Caution: DO NOT powered on the wireless audio box alone with battery insert and power
adapter connected at the same time to avoid uncessery dangerous.
No external driver installed under OS support of Win 2000, XP, Vista, Win 7and Mac.
Please follow the steps as below and complete the association process between Wireless
Audio Dongle and Wireless Audio Box.
1. Plug the Wireless Audio Dongle into the USB port of PC or Mac, and you may find the
LED start blinking for powered on indicator.
2. Powered on the Wireless Audio Box with battery insert or power adapter connected
first, and then press the Wireless Audio Box PWR button over 3 seconds until the
Wireless Audio Box LED start blinking for powered on indicator.
3. Please plug headphone or speaker into audio output before pairing. Press the Wireless
Audio Dongle pairing bottom over 3 seconds first and then press the Wireless Audio
Box Volume bottom over 3 seconds until you heard the beep sound form headphone
or speaker to indictor the association successfully.
4. Now the association has been successfully, and you may start to use your Wireless
Audio/ Mic Adapter.
Note：
The Wireless Audio Box will be automatically entry the power saving mode when no audio
single receive after five minutes about, please re-push the PWR button for power on and
keep use the Wireless Audio / Mic Adapter.
4
3. Specifications
Item Description
USB RF Dongle USB Type A Male
3. Specifications
Interface
RF Band 2.4 GHz
RF data rate Up to 2 Mbps , GFSK modulation
Audio Output 2 channel Line Out
Microphone Input 1 channel Line In
Audio Sample rate 32KHz with 16-bit downstream; 16KHz with 16-bit upstream
Audio Compliance
Power Mode
Power
consumption
Audio Output 3.5mm Stereo Audio Jack Female
Audio Input 3.5mm Stereo Audio Jack Female
Power DC Power Jack
USB 1.1 full speed specification as transfer rate to 1.5 / 12 Mbps
Supports LPCM and Compressed format 16-bit 2-channels
Wireless Audio Dongle
Wireless Audio Box
Wireless Audio Dongle 40mA
Wireless Audio Box
Bus-powered
Power Adapter
Battery AAA 1.5V battery x 1
Power Adapter 0.225 W
Battery 0.15 W
Input：AC 100-240V ; Output : DC 5V /1A
LED
Operational
Range
Operation System
Support
Working
Environment
Dimension
Housing Plastic ABS
* Specifications are subject to change without notice.
Green LED
Orange LED Lights up when Mic function is been used.
Up to 10 meters
Windows 2000, XP SP2 , Vista 32/64-bit and Windows 7
Mac OS X v10.x or later
Operating Temperature 10~40 degrees (Celsius)
Storage Temperature 0~70 degrees (Celsius)
Humidity 0~80%
Wireless Audi o Dongle 65 (L) x 20 (W) x 10 (H) (mm)
Wireless Audi o Box 58 (L) x 55 (W) x 14.4 (H) (mm)
Blinking when powered on, lights up when data transf er
between wireless audio dongle and wireless audio box.
5
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: Change or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance."
6
7
Loading...