Good Way Tech NU2220, NU2320, UD-224 User Manual

User’s Manual

2.5“ USB 2.0 IDE External Enclosure

Table of Contents

Safety Instructions…………………………………………..……………………….…..……1

Introduction…………………………………………...……………………………..……….…1

Features………………………………………………………..…………………….……..…...1
System Requirements……………………………………..………………………..……..….1

Package Contents…………………………………………..……………………..………..…2

Specification……………………………………………..…….……………………………..…2

Driver Installation……………….....…..…………………………..…………………..………3

Installation Verification………….………………………...………………………………...10
Certificate………………………………………………..….………………………………….13
Disclaimer……………………..…………..………………..………………………………….13

Safety Instructions

Always read the safety instructions carefully

 Keep this User’s Manual for future reference
 Keep this equipment away from humidity
 Lay this equipment on a reliable flat surface before setting it up
 If any of the following situation arises, get the equipment checked by a service

technician:

 The equipment has been exposed to moisture.
 The equipment has been dropped and damaged.
 The equipment has obvious sign of breakage.
 The equipment has not working well or you cannot get it work according to

User’s Manual.

Introduction

The USB 2.0 to IDE External Case allows you to upgrade 2.5” IDE disk drives to USB 2.0
ATAPI host commands. Provides the ability to upgrade and support a variety of
ATA/ATAPI based 2.5” disk drives without changing the peripheral hardware.

Features

 Transfer rate of Hi-speed USB 2.0 interface can be up to 480 Mb/sec (max).
 Complies with the USB Storage Class specification ver.1.0
 Supports Plug&Play function.
 Operating system supported: Win XP / 2000 / Me / 98SE and Mac 9.X / 10.X.

System Requirements

 IBM compatible Pentium-233MHZ or faster & MAC PC
 64 MB RAM or more
 Available USB 2.0 Port
 Software support

1

OS 2.5” USB 2.0 IDE External Enclosure

Win 98SE

Driver Support

Win ME

System Support

Win 2000

System Support

Win XP

System Support

Mac 9.X

System Support

Mac 10.X

Driver Support

Package Content

 USB 2.0 IDE External Enclosure X 1
 Power Adapter X 1
 Mini Cable X 1
 CD Driver X 1

 Quick Installation Guide X 1

Specification

Products 2.5” USB2.0 IDE External Enclosure
Function

Support 2.5” storage HDD

Standards

Compliant Hi-Speed USB 2.0 interface

Sockets

2.5” IDE slot

Interface

External Hi-Speed USB 2.0 device

Ports

1 mini upstream port & 1 DC Jack

Compliance

FCC regulations for home or office use CE emissions

2

Driver Installation

Windows 98SE

Please Plug-in the device to the OS system of 98SE and also plug-in the software driver
to CD-ROM. Follow installation to step by step for OS 98SE until processed finished.

1. When device plug-in, system shows up the “ Add New Hardware Wizard “ for new
driver for “ USB to IDE “ and click “ NEXT “.

2. After that, select the “ search for the best driver for your device {recommended}
“ in windows requirement and click “ NEXT “.

3

3. For the next setup, Windows will search for new drivers in its driver database on your
hard drive in selected locations for “E:\IDE Win98SE Driverrev159 “ in selection
“ specify a location ” and click “ NEXT “.

4 Windows is now to install the best driver for this device. System finds

“ E:\IDEWIN~7\GENEUIDE.INF “ in location of driver.

4