Page 1
Page 2
This
document
is
made
possible
by
its
donation
The
This
is
from
the
archives
of:
Tell City Chair
not
an
original
Tell City,
page
IN
in
the
document.
Co.
Page 3
Outstanding
Standard
Features:
• Sliding
turning removal.
• Carriage two-speed system excellent for normal and difficult
turning situations.
•
Patented
die system - most important
for smo
• Completely automatic end pressure reducing
slender turnings.
tailspindle-
pressure lubrication
tu.r.ni
system-
.o .
.,......
for easy
___
..:::::,.
for
• Adjustable
to insure the proper knife clearance depending
and wood species.
• Two high capacity spindle drive
belts for more driving power.
• Top support for sash guide bar
to insure smoother more rapid
turning.
• Hardened steel bed way (ground, • Double bearings top and bottom
polished, and hard chrome for guide side of sash to improve
plated) for longer life. stability and longer bearing life.
"no-shim"
on
turning shape
knife bar
Complimenting our line of woodworking equipment our
FH
series backknife lathes incorporate all of the
desirable features of our own heavy duty
of competition machines and then go well beyond with
features required for today's precision and high
production turning.
The backknife principle has long proven its value
terms of economy, high production, identical turnings,
ease of set-up, and safety.
• Safety electrical interlock system.
• One operator can feed up to five machines.
HH
series and
in
Tailstock
• Goodspeed's
positive hydraulic motion
and simplicity. The assembly uses
to provide positive tailspindle positioning along with easy spindle
removal without disturbing hydraulic components.
• Quick clamp handle for easy repositioning.
• Tailstock snubber to overcome rapid contact of retracting
carriage during manual operation.
unequalled
sliding tailspindle assembly combines
"in"
and
"out"
with strength, durability,
an
exclusive linkage design
Page 4
Carriage
• Goodspeed's new and exclusive
reduces bearing wear due to abrasive wood chips and dust buildup . Bearing surfaces are completely protected with wipers and
seals while a large portion of the wood chips and dust is directed
away from bearing surfaces.
• Enclosed gouge holder for strength along with a very accessible
gouge holder adjusting screw. Design also allows use of either
roughing gouge or smoothing gouge.
• Precision die mounting with no alignment required.
•
Patented
connections.
• Carriage slowdown control system permits fast feed rates and
automatic controlled slowdown where required. Same simple
system works for
for each turning.
• Heavy gouge cutting vibration is greatly reduced because of our
exclusive steady rest plate and heavy duty template bar combination.
• Hardened cone shaped bearings for the gouge holder assures
positive and shakeproof alignment.
• Full range adjustment for roughing knife elevation.
• Safety adjusting
pressure lubricated die system with permanent
all
set-ups with no individual template requi
screw
for backknife elevation .
11
flo-thru"
carriage design
Headstock
• Precision spindle.
• An
exclusive
speed design uses regulated high pressure for initial dogging and
then automatically reduces to an adjustable low pressure at the
proper time along the turning and before whipping occurs. The
system provides deep spur penetration for driving without boring-
in, relaxes to avoid whipping, and permits faster spindle speeds
for more production
• Two high capacity drive belts to safely utilize full drive motor H.P.
• Headblock end shield keeps wood chips out of motor compartment.
• Four speed step pulley for rapid speed changing and to accommodate the most desirable speed range.
• Convenient dogging pressure regulation with pressure gauge.
Sash
• Sash design features
bearings at top and bottom of the
stability, relube type lubrication provided between bearing sets
to assure maintenance-free service, open type frame construction
to eliminate wood chip and dust maintenance problem, and by
eliminating sash guide bar deflection with
bracket complete sash support for any length turning
and which permits heavier and faster turning without vibration.
• Goodspeed's new adjustable knife bar easily obtains
cutting clearance angle for the backknife
shims. The backknife turning diameter adjustment does not affect
the backknife clearance adjustment as both adjustments are
completely separate, easy, and foolproof.
design avoids the ' risk of twisting the knife bar and
backknife itself.
end
pressure
on
and
an
reduction
slender turnings.
Knife
all-welded type construction, double
"A"
system
of Good-
Bar
frame for much greater
an
exclusive top support
is
now provided
correct
without
In
addition, Goodspeed's
the use of
in
turn the
Page 5
teady
A most important feature for smooth, long, slender turnings
is our optional traveling steady rest which used along with
the pressure reducing system (standard equipment) virtually
eliminates whipping and breakage. Precision turning and
high production become a reality. The steady rest is electrically controlled
pivoting end which follows the turning contours.
Rest
"in"
and
"out"
and has a hardened
.!{.
ck
The optional stock holdback attachment
suited when feeding small, irregular size squares or dowels
from the hopper to prevent double feeding and jam-ups.
Hopper stock
at a time to drop into hopper feeder. Cycle time is
way affected.
is
held back automatically allowing one piece
~
is
especially
in
no
-
e>o
Standard
• 3 round dies • wrenches
• 2 drive centers
• 2 shell drive spurs
• 2 cup tailcenters with
points
• 2 pair stock supports
• 1 high speed roughing knife
• 1 high speed roughing
gouge & clamp
• 1 high speed smoothing
gouge & clamp
Optional
• counter • steady rest
• dead spindle dogging • hopper stock holdback
• single or double end
drilling
• square die attachment
Equipment:
• hydraulic oil
• die lube oil
• 1 set-up die
• 1 set-up center
• 1 pair dowel retaining
brackets • 2 drift pins
• front & rear chip
collectors
• duplicate set-up sheets
• instruction manual
• graphic parts catalog
Equipment:
attachment • trim saw attachment
• high speed sheave
(5500
RPM)
Specifications:
MODELS
SHIPPING
FLOOR
STOCK
STOCK
STOCK
ROUND
HEADSPINDLE
SPINDLE
TURNING
HYDRAULICS
VOLTAGES
WEIGHT
SPACE
LENGTH
LENGTH
SIZE
DIE
SIZES
SPEEDS
RATE
MAX.
MIN.
DRIVE
FH30, FH40, FH45
3400 lbs., 35851bs., 3750 lbs.
44" X 92",
30V2",
3"1"
thru
(
a14
''
1" thru 3
optional tailspindle)
15 H.P. motor
2250,3200,3825,4625
(5500 - optional)
Up to 600 pieces per hour
Low pressure, self-contained system
with 2 H.P. motor
230, 460, 575
380 volts - 50
44" X 112",
41
V2", 45V2"
all models
3"
square or round
to 1
''
- optional)
Y4
" (
1
Y,
"
6
volts-
Hl
to
1"
44" X 121
with
60 Hz,
"
WE
ALSO BUILD: Variety Lathes • Trim, Chuck &
Boring Machines • Boring Equipment • Multiple Cut·
Off Saws • Deep Hole Borers • Chucking Machines •
Plus Other Machines •
GOODSPEED
15
Summer Drive
MACHINE
CO.
Winchendon, MA 01475
TELEPHONE: (617} 297-0296 or (617) 297-0349
Loading...