Goodman ANX, SSX, ASX, GSX, DSX Service manual
...
Service Instructions
ANX, SSX, ASX, GSX, DSX
Condensing Units,
ANZ, SSZ, ASZ, GSZ, DSZ, VSX, VSZ Split System Heat Pumps
with R-410A Refrigerant
Blowers, Coils, & Accessories
This manual is to be used by qualified, professionally trained HVAC technicians only. The
manufacturer does not assume any responsibility for property damage or personal injury due to
improper service procedures or services performed by an unqualified person.
Copyright © 2006 - 2016 Goodman Manufacturing Company, L.P.
RS6200006r76
December 2016
Table of Contents
IMPORTANT INFORMATION ................................................... 2
PRODUCT IDENTIFICATION - MODEL TREES ..................... 4
COILS .................................................................................. 6
BLOWERS .......................................................................... 7
AIR HANDLERS .................................................................. 8
LIGHT COMMERCIAL ....................................................... 10
PRODUCT IDENTIFICATION - CHARTS .............................. 11
LIGHT COMMERCIAL ....................................................... 11
SPLIT SYSTEM HEAT PUMPS .......................................... 12
AIR HANDLERS ................................................................ 37
COILS ................................................................................ 43
ACCESSORIES - LIGHT COMMERCIAL .............................. 47
MODELS TO KITS MATCHUP ........................................... 48
ASSOCIATED KITS ........................................................... 57
PRODUCT DESIGN .............................................................. 69
SYSTEM OPERATION ........................................................... 72
TROUBLESHOOTING CHART ............................................. 76
IMPORTANT INFORMATION
Pride and workmanship go into every product to provide our customers with quality products. It is possible, however, that during its
lifetime a product may require service. Products should be serviced only by a qualified service technician who is familiar with the
safety procedures required in the repair and who is equipped with the proper tools, parts, testing instruments and the appropriate
service manual. REVIEW ALL SERVICE INFORMATION IN THE APPROPRIATE SERVICE MANUAL BEFORE BEGINNING REPAIRS.
IMPORTANT NOTICES FOR CONSUMERS AND SERVICERS
RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS
T
HIS UNIT SHOULD NOT BE CONNECTED TO. OR USED IN
CONJUNCTION WITH, ANY DEVICES THAT ARE NOT DESIGN CERTIFIED
FOR USE WITH THIS UNIT OR
NOT BEEN TESTED AND APPROVED BY THE MANUFACTURER
HAVE
ERIOUS PROPERTY DAMAGE OR PERSONAL INJURY, REDUCED UNIT
S
PERFORMANCE
AND/OR HAZARDOUS CONDITIONS MAY RESULT FROM THE USE OF
DEVICES THAT HAVE NOT BEEN APPROVED OR CERTIFIED BY THE
MANUFACTURER
.
.
HIGH VOLTAGE
D
ISCONNECT
UNIT
F
AILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY
OR DEATH
ALL
POWER BEFORE SERVICING OR INSTALLING THIS
. M
ULTIPLE POWER SOURCE S MAY BE PRESENT
.
.
O
TO
PREVENT THE RISK OF PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH
DO NOT STORE COMBUSTIBLE MATERIALS OR USE GASOLINE OR OTHER
FLAMMABLE LIQUIDS OR VAPORS IN THE VICINITY OF THIS APPLICANCE
NLY PERSONNEL THAT HAVE BEEN TRAINED TO INSTALL, ADJUST, SERVICE OR
REPAIR (HEREINAFTER
,
.
MANUAL SHOULD SERVICE THE EQUIPMENT
BE RESPONSIBLE FOR ANY INJURY OR PROPERTY DAMAGE ARISING FROM
IMPROPER SERVICE OR SERVICE PROCEDURES
ASSUME RESPONSIBILITY FOR ANY INJURY OR PROPERTY DAMAGE WHICH MAY
RESULT
. IN
LICENSES TO SERVICE THE EQUIPMENT SPECIFIED IN THIS MANUAL, ONLY
LICENSED PERSONNEL SHOULD SERVICE THE EQUIPMENT
INSTALLATION, ADJUSTMENT, SERVICING OR REPAIR OF THE EQUIPMENT
SPECIFIED IN THIS MANUAL, OR ATTEMPTING TO INSTALL, ADJUST, SERVICE OR
REPAIR THE EQUIPMENT SPECIFIED IN THIS MANUAL WITHOUT PROPER
TRAINING MAY RESULT IN PRODUCT DAMAGE, PROPERTY DAMAGE, PERSONAL
INJURY OR DEATH
, “
SERVICE
”)
THE EQUIPMENT SPECIFIED IN THIS
. THE
MANUFACTURER WILL NOT
. IF
YOU SERVICE THIS UNIT, YOU
ADDITION, IN JURISDICTIONS THAT REQUIRE ONE OR MORE
. I
MPROPER
.
To locate an authorized servicer, please consult your telephone book or the dealer from whom you purchased this product.
For further assistance, please contact:
CONSUMER INFORMATION LINE
GOODMAN® BRAND PRODUCTS
TOLL FREE
1-877-254-4729 (U.S. only)
email us at: customerservice@goodmanmfg.com
fax us at: (713) 856-1821
(Not a technical assistance line for dealers.)
email us at: customerservice@goodmanmfg.com
AMANA® BRAND PRODUCTS
TOLL FREE
1-877-254-4729 (U.S. only)
fax us at: (713) 856-1821
(Not a technical assistance line for dealers.)
(Not a technical assistance line for dealers.) Your telephone company will bill you for the call.
is a registered trademark of Maytag Corporation or its related companies and is used under license. All rights reserved.
2
Outside the U.S., call 1-713-861-2500.
IMPORTANT INFORMATION
SAFE REFRIGERANT HANDLING
While these items will not cover every conceivable situation, they should serve as a useful guide.
R
EFRIGERANTS ARE HEAVI ER THAN AIR
YOUR LUNGS OR IN ANY ENCLOSED SPACE
BREATHI NG OR DEATH
EVER PURGE REFRIGE RANT INTO AN ENCLOSED ROOM OR SPACE
• N
ALL REFRIGE RANTS MUST BE RECLA IMED
F AN INDOOR LEAK IS SUSPECTED, THOROUGHLY VENTILATE THE ARA
• I
BEFORE BEGINNING WORK
IQUID REFRIGERANT CAN BE VERY COLD
• L
BLINDNESS, AVOID CONTACT WITH REFRIGERANT AND WAR GLOVES AND
GOGGL ES
. IF
MEDICAL HELP IMMEDIATELY
• A
LWAYS FOLLOW
POISONOUS GAS WILL BE PRODUCED
:
LIQUID REFRIGERANT DOES CONTACT YOUR SKIN OR EYES, SEEK
EPA
REGULATIONS
. T
HEY CAN “PUSH OUT” THE OXYGEN IN
. TO
AVOID POSSIBLE DIFFICULTY IN
. BY
.
.
. TO
AVOI D POSSIBLE FROSTBITE OR
LAW
,
TO
AVOID POSSIBLE EXPLOSION
EVER APPLY FLAME OR STEAM TO A REFRIGERANT CYLIN DER
• N
HEAT A CYLIN DER FOR FASTER CHARGIN G, PARTIALLY IMMERSE IT IN WARM
WATER
.
EVER FILL A CYLIN DER MORE THAN
• N
EVER ADD ANYTHING OTHER THAN
• N
TO AN
410A
LISTED OR CERTIFIED FOR THE TYPE OF REFRIGERANT USED
• S
TORE CYLIN DERS IN A COOL, DRY PLACE
PLATFORM OR A ROLLER
R-410A
:
CYLINDER
.
. THE
.
. N
EVER BURN REFRIGERANT, AS
.
TO
AVOID POSSIBLE EXPLOSION, USE ONLY RETU RNABL E (NOT DISPOSABLE
SERVICE CYLINDERS WHEN REMOVING REFRIGE RANT FROM A SYSTEM
• E
NSURE THE CYLINDER IS FREE OF DAMAGE WHICH COULD LEAD TO A
LEAK OR EXPLOSION
• E
NSURE THE HYDROSTATIC TEST DATE DOES NOT EXCEED
• E
NSURE THE PRESSURE RATING MEETS OR EXCEEDS
.
. IF
YOU MUST
80%
FULL OF LIQUID REFRIGERANT
R-22 TO AN R-22
SERVICE EQUIPMENT USED MUST BE
CYLIN DER OR
.
. N
EVER USE A CYLIN DER AS A
.
5
YEARS
.
400 PSIG.
.
R-
)
THE U
NITED STATES ENVIRONMENTAL PROTECT ION AGENC Y
HAS ISSUED VARIOUS REGULATIONS REGARDING THE INTRODUCTION AND
OF
DISPOSAL
FOLLOW
LEAD
MAY
LOCAL
S
YSTEM CONTAMINA NTS, IMPROPER SERVICE PROCED URE AND/OR PHYSICAL
ABUSE AFFECTIN G HERMETIC COMPRESSOR ELECTRICAL TERMINALS MAY CAUSE
DANGEROUS SYSTEM VENTING
REFRIGE RANTS INTRODUCED INTO THIS UNIT
THESE REGULATIONS MAY HARM THE ENVIRONMENT AND CAN
TO
THEH IMPOSITION OF SUBSTANTIAL FINES
VARY BY JURISDICTION
EPA
OFFICE
. S
HOULD QUESTIONS ARISE, CONTACT YOUR
.
. T
.
("EPA")
. F
AILURE TO
HESE REGULA TIONS
The successful development of hermetically sealed refrigeration
compressors has completely sealed the compressor's moving
parts and electric motor inside a common housing, minimizing
refrigerant leaks and the hazards sometimes associated with
moving belts, pulleys or couplings.
Fundamental to the design of hermetic compressors is a method
whereby electrical current is transmitted to the compressor
motor through terminal conductors which pass through the
compressor housing wall. These terminals are sealed in a
dielectric material which insulates them from the housing and
maintains the pressure tight integrity of the hermetic compressor. The terminals and their dielectric embedment are strongly
constructed, but are vulnerable to careless compressor installation or maintenance procedures and equally vulnerable to
internal electrical short circuits caused by excessive system
contaminants.
HEN IN DOUBT, DO NOT USE CYLINDER
W
TO
AVOID POSSIBLE INJURY, EXPLOSION OR DEATH, PRACTICE SAFE
OF
HANDLING
REFRIG ERANTS
.
.
In either of these instances, an electrical short between the
terminal and the compressor housing may result in the loss of
integrity between the terminal and its dielectric embedment. This
loss may cause the terminals to be expelled, thereby venting the
vaporous and liquid contents of the compressor housing and
system.
A venting compressor terminal normally presents no danger to
anyone, providing the terminal protective cover is properly in
place.
If, however, the terminal protective cover is not properly in place,
a venting terminal may discharge a combination of
(a) hot lubricating oil and refrigerant
(b) flammable mixture (if system is contaminated
with air)
in a stream of spray which may be dangerous to anyone in the
vicinity. Death or serious bodily injury could occur.
Under no circumstances is a hermetic compressor to be electrically energized and/or operated without having the terminal
protective cover properly in place.
See Service Section S-17 for proper servicing.
3
PRODUCT IDENTIFICATION
AN Z 13 018 1 AA
1 2 3 4,5 6,7,8 9 10,11
Brand
A -
Amana® brand
Type
N 1 - 208/230V Single-Phase 60 Hz
Deluxe Split System
2 - 220/240V Single-Phase 50 Hz
Type 3 - 208/230V Three-Phase 60 Hz
X: Condens er R-4 10A 4 - 4 60V Three-Pha se 60 Hz
Z: Heat Pump R-410A 5 - 380/415V Three-Phase 50 Hz
SEER
11 - 11 SEER
13 - 13 SEER
14 - 14 SEER
16 - 16 SEER
18 = 1-1/2 Tons
24 = 2 Tons
30 =
2-1/2 Tons
Major/Minor Revis ions
3-1/2 Tons
42 =
48 = 4 Tons
59 = 5 Tons
Engineering
Voltage
Nominal Capacity
36 = 3 Tons 60 = 5 Tons
61 = 5 Tons
4
PRODUCT IDENTIFICATION
SS Z 14 1 AA
1 2 3 4,5 9 10,11
Brand
G
Goodman® brand
(Standard Feature Set)
S
Goodman® brand
(High Feature Set)
A
Amana® brand
Deluxe
D
Goodman® brand
Deluxe
V
Value Li ne
Type
S 1 - 208/230V Single-Phase 60 Hz
Split System
Type 3 - 208/230V Three-Phase 60 Hz
X: Condenser R-410A 4 - 460V Three-Phase 60 Hz
Z: Heat Pump R-410A 5 - 380/415V Three-Phase 50 Hz
036
6,7,8
Engineering
Maj or/Mi nor Revi si ons
Voltage
2 - 220/240V Single-Phase 50 Hz
SEER
13 - 13 SEER 018 = 1-1/2 Tons 042 = 3-1/2 Tons
14 - 14 SEER 024 = 2 Tons 048 = 4 Tons
16 - 16 SEER 030 = 2-1/2 Tons 059 = 5 Tons
18 - 18 SEER 036 = 3 Tons 060 = 5 Tons
038 = 3 Tons
5
PRODUCT IDENTIFICATION
A
=
CAP F 1824 A 6 A
1 2 3 4 5,6,7,8 9 1 0 11,12
Brand Engineering*
C Indoor Coil
Unit Application 2 = R-22
A Upfl ow/Downfl ow Coil
H Horizontal A-Coil
Horizontal Slab Coil
S
Coated Coils
T
Nominal Width for Gas Furnace
A = Fits 1 4" Furnace Cabinet
B = Fits 17-1/2" Furnace Cabinet
C =
Fits 21" Furnace Cabinet
D = Fits 24-1/2" Furnace Cabinet
N
Does Not Apply (Horizontal Slab Coils
Major/Minor Revisions
Refrigerant Charge
4 = R-410A
6 = R-410A or R-22
Cabinet Finish
U Unpai nted
PPainted
N Unpainted Cas e
Expansion Device
FFlowrator
T 4 - 5 Tons
Expansi on Valve 4 - 5 Tons
1824 =
3030 =
3131 =
3636 =
3642 =
3743 =
4860 = Factory-Installed Non-Adjustable
4961 =
Nominal Capacity @ 13 SEER
1-1/2 - 2 Tons
2-1/2 Tons
2-1/2 Tons
3 Tons
3 - 3-1/2 Tons
3 - 3-1/2 Tons
6
PRODUCT IDENTIFICATION
A
A
H
MB R 8 00
1,2 3 4 5,6 7 8 9
Brand
MB - Modular Blower 1: 208-230V/60Hz/1 P
Type A: Fi rst Seri es
R -
Speed
E -
Vari able Speed
Airflow A: No Ci rcuit Breaker
8:
12:
16:
20:
800 CFM
1200 CFM
1500 CFM
2000 CFM
B: Ci rcuit Breaker
1
Elect rical
Design Se ries
Circuit Breaker
Factory Heat
00 No Heat
7
PRODUCT IDENTIFICATION
W
A
1 2 3 4 5,6,7,8 9 10 11 ,12
Brand Engineering*
A Airhandler
Unit Application Refrigerant Charge
C Ceiling Mount PSC Motor 4 = R-410a
DDownflow PSC Motor
Multi Position
E Electrical
Vari a bl e Sp eed
R Mul ti Pos iti on PSC Motor
S Mul ti Posi tion EEM Motor
T Coated Coils
W Wal l Mount PSC/EEM Motor
Cabinet Finish 1830 = 1-1/2 - 3-1/2 Tons
U Unpainted 3137 = 3 Tons
PPainted 3642 = 3 - 3-1/2Tons
NUncased
Expansion Device
FFlowrator
T Expansion Valve 1803 = 1-1/2 Tons Cooling/3 kW Electric Heat
U F 3642 1 6 AA
Maj or/Mi nor Revisi ons
1 208/240V, 1 Phase, 60 Hz
Nominal Capacity
@ 13 SEER Dedicated Application
3636 = 3 Ton
Multi-Position & Downflow Application
Multi-Position & Downflow Application @10 SEER
1729 = 3 Ton
Ceing Mount & Wall Mount Applications
(Nominal Cooling Capacity/Electric Heat kW)
1805 = 1-1/2 Tons Cooling/5 kW Electric Heat
2405 = 2 Tons Cooling/5 kW Electric Heat
3608 = 3 Tons Cooling/8 kW Electric Heat
3105 = 1-1/2 - 2-1/2 Tons Cooling/5 kW Electric Heat
3210 = 2 - 2-1/2 Tons Cooling/5 kW Electric Heat
3705 = 3 Tons Cooling/5 kW Electric Heat
3708 = 3 Tons Cooling/8 kW Electric Heat
3710 = 3 Tons Cooling/10 kW Electric Heat
An "F" in the model number denotes a
Factory Installed Float Switch is present.
All Airhandlers use DIRECT DRIVE MOTORS. Power supply is AC 208-240v, 60 hz, 1 phase.
8
PRODUCT IDENTIFICATION
ARU F 18 B 1 4AA
123 4 5,6 7 8 910,11
Brand Engineering*
A Singl e-Pi ece
Ai rhandl er
Unit Application Refrigerant Charge
C Ceiling Mount PSC Motor 4 = R-410a
R Mul ti Pos iti on PSC Motor
S Mul ti Posi ti on EEM Motor Electrical
W Wall Mount PSC/EEM Motor 1 208/240V, 1 Phase, 60 Hz
Maj or/Mi nor Revi si ons
Cabinet Finish
UUnpainted B =
PPainted C = 21" Wide
NUncased D = 24 -1/2" Wide
Expansion Device
F Flowrator 18 =
T Expansion Valve 24 = 2 Tons 47 =
1-1/2 Tons
25 = 2 Tons 48 = 4 Tons
2-1/2 - 3 Tons
29 =
2-1/2 Tons
30 =
36 =3 Tons 60 =5 Tons
2-1/2 - 3 Tons
37 =
Nominal Capacity @ 13SEER
Cabinet Width
1/2" Wide
17-
3-1/2 Tons
42 =
3-1/2 Tons
49 = 4 Tons
59 = 5 Tons
61 = 5 Tons
Airhandlers use DIRECT DRIVE MOTORS. Power supply is AC 208-230v, 60 hz, 1 phase.
9
PRODUCT IDENTIFICATION
A
A
GS X 11 090 1 AA
1 2 3 4,5 6,7,8 9 10,11
LIGHT COMMERCIAL
Brand
G - Goodman brand
A - Amana brand
Type
S 1 - 208/230V Single-Phase 60 Hz
Split Sys tem
2 - 220/240V Single-Phase 50 Hz
Type 3 - 208/230V Three-Phase 60 Hz
X: Condens er R-41 0A 4 - 460V Three-Phase 60 Hz
Z: Heat Pump R-410A 5 - 380/415V Three-Phase 50 Hz
SEER
11 - 11 SEER
13 - 13 SEER
14 - 14 SEER
16 - 16 SEER 036 - 3 Tons
048 - 4 Tons
060 - 5 Tons
090 - 7-1/2 Tons
120 - 10 Tons
Maj or/Mi nor Revi si ons
Engineering
Voltage
Nominal Capacity
10
R 090 A
12 3,4,5 6,7
Brand
Single Piece
A
Ai r Handler
Unit Application
R 090 7-1/2 Tons
Multi Position
PSC Motor
For use with GSX/GSZ11 Light Commercial models only.
Maj or/Mi nor Revisi ons
Engineering
Nominal Capacity
120 10 Tons
PRODUCT IDENTIFICATION
GSX11 LIGHT COMMERCIAL
LIGHT COMMERCIAL
OODMAN® BRAND SPLIT
G
Model/Rev Description
GSX11090*AA
GSX11120*AA
GSX111203AB
GSX110903AB
GSX111204AB
GSX110904AB
Introduction of Goodman Light Commercial 11 SEER, R-410A Condensers.
208-230V and 460V 3 Phase condensing units with new ball valve/brackets, suction
tube/assembly and panel w/offset.
R410A CONDENSERS 11 SEER
X-
GSZ11 LIGHT COMMERCIAL
OODMAN SPLIT Z-R410A HEAT PUMP 11 SEER
G
Model/Rev Description
GSZ11090*AA
GSZ11120*AA
GSZ110903AB
GSZ111203AB
GSZ110904AB
GSZ111204AB
Introduction of Goodman Light Commercial 11 SE ER, R-410A Heat Pumps.
208-230V and 460V 3 Phase R410A heat pump units with new ball valve/brack ets, suction
tube/assembly and panel w/offset.
AR LIGHT COMMERCIAL
SINGLE PIECE
A
Model/Rev Description
AR0904A
AR1204A
Introducation of new 7.5 & 10 Ton Air Handler Models, for use with GSX11 and GSZ11
Light Commercial Models.
MULTI-POSITION PSC MOTOR
R-
11
PRODUCT IDENTIFICATION
Split System Heat Pumps
ASZ13
MANA® BRAND SPLIT
A
Model/Rev Description
ASZ130**1AA Initial release of Amana® Brand 13 SEER Heat Pump R410A.
ASZ130**1AB Introduces new revisions with improved circuiting for effective defrost.
ASZ130[18, 36-60]1AB
ASZ130[24-30]1AC
ASZ130[18, 36-60]1AC
ASZ130[24-30]1AD
ASZ130[18, 36-60]1AD
ASZ130[24-30]1AE
ASZ130241BA Release of 2 Ton models, converting from 3/8" to 5mm condenser coils
ASZ130181AF
ASZ130[24-30]1AG
ASZ130481AF
ASZ130361AG
ASZ130421AH
Introduces models c ontaining crankcas e heater, CCH s witch and upgraded defrost
control.
Relocation of low pressure switch from liquid line to suction line as a compressor
safeguard to prevent low pressure from entering.
Initial release of models using single speed PSC motors; removal of low ambient
temperature switch.
Current reversing valve change from Dunan to new SanHua reversing valve
Current Ranco reversing valve 0151M00020 replaced by SanHua 0151R00070 reversing
va lve
Change from copper wound motor to aluminum wound motor.
R410A HEAT PUMP 13 SEER
Z-
ASZ130481AG
ASZ130601AF
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
12
PRODUCT IDENTIFICATION
Split System Heat Pumps
ASZ14
MANA® BRAND SPLIT
A
Model/Rev Description
ASZ140**1AA
ASZ140**1AB Screw locations moved in the top panel, base pans, louvers, and control box covers.
ASZ140**1AC Horizontal style louvers.
ASZ140[18, 42-48]1AD
ASZ140[24-36, 60] 1AE
ASZ140361AF
ASZ140421AD
ASZ140[48-60]1AE
ASZ140[18, 30,36]1AF
ASZ140241AG
ASZ14[42, 48, 60]1AE
ASZ140241AF Smaller B1227315 reversing valve.
ASZ140[18,30,36]1AG
ASZ140241AH
ASZC160[42,48,60]1AF
Initial release of Amana® Brand 14 SEER Heat Pump R410A with sound blankets and
Coresense control.
New steel muffler, and suction tubes w/s hock loop.
TXV & compensator replaced with flowrator & accumulator.
Sanhua (RANCO) reversing valves.
Introduction of heat pumps with accumulators, crankcase heaters, and upgraded defrost
control.
R410A HEAT PUMP 14 SEER
Z-
ASZ140361BA Chassis size reduct ion from large to medium.
ASZ140[18, 30]1AH
ASZ140241AJ
ASZ140[42-60]1AG
ASZ140[18, 30]1AJ
ASZ140241AK
ASZ140[42-60]1AH
ASZ140361BB
ASZ140181AL
ASZ140241AM
ASZ140301AL
ASZ140361BC
ASZ140381AB
ASZ140[42-60]1AK
Relocation of low pressure switch from liquid line to suction line as a compressor
safeguard to prevent low pressure from entering.
2 speed PSC motors replaced with s ingle speed PSC motors.
Revision made for design improvement.
*ASZ14 CONTINUED ON THE NEXT PAGE
13
PRODUCT IDENTIFICATION
Split System Heat Pumps
ASZ14
MANA® BRAND SPLIT
A
Model/Rev Description
ASZ140381AA 35" chass is with 6-channel flowrator and ZP29K5 compressor.
ASZ140[18-30]1BA Updated ratings and agency information.
ASZ140[18-60]1KA
ASZ140[421,491,]KB Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
ASZ140181KC Change from copper wound motor to aluminum wound motor.
Introduction of ready 15, 14 SEER heat pumps to meet the 2015 energy efficiency
requirem ent.
R410A HEAT PUMP 14 SEER
Z-
ASZ140[241, 301, 361, 481, 601]KB
ASZ140[421, 491] KC
ASZ140181KD Refrigerant Charge Reduction
ASZ140[241,301,361,]KC
ASZ140[481,601]KC
Refrigerant Charge Reduction
Equivalent motor with Aluminum W indings replacing Copper Windings.
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
14
PRODUCT IDENTIFICATION
Split System Heat Pumps
ASZ16
MANA® BRAND SPLITS
A
Model/Rev Description
ASZ160**1AA Initial releas e of Amana® Brand 16 SEER Heat Pump R410A.
ASZ160**1AB
ASZ160**1AC Horizontal style louvers.
ASZ160**1AD Muffler and standardized TXV, Compensator using the ASZ18 Seer weldment.
ASZ160241AD
ASZ160[36-60]AE
ASZ160[24, 36]1AF
ASZ160[48, 60]1AF
ASZ160[24,36,48,60]1KA Initial release of Amana® Brand 16 SEER Heat Pump models
ASZ160[18-48]1LA Initial release of Amana® Brand 16 SEER Heat Pump models with 9.6+ HSPF
ASZ160601LA Initial release of Amana® Brand 5 Ton 16 SEER, 13 eer Heat Pump models.
ASZ160[241,301]LB Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
ASZ160181LB 16SEER 1.5T Heat Pumps, Remove Hard Start Kit
ASZ160181LC Change from copper wound motor to aluminum wound motor.
ASZ160[361,481]LB Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Introduces models with screw locations moved in the top panel, base pans, louvers, and
control box covers.
Adds new steel muffler, and suction tubes w/s hock loop.
Sanhua (RANCO) reversing valves.
R410A HEAT PUMP 16 SEER
Z-
ASZ18
MANA® BRAND SPLIT
A
Model/Rev Description
ASZ180**1AB Initial releas e of Amana® Brand 18 SEER Heat Pump R410A.
ASZ180[36, 48, 60]1AC Sanhua (RANCO) reversing valves.
R410A HEAT PUMP 18 SEER
Z-
15
PRODUCT IDENTIFICATION
Split System Heat Pumps
ANZ13
MANA® BRAND SPLIT SYSTEM
A
Model/Rev Description
ANZ130[18-60]1AA Initial releas e of Amana® Brand Split System Base Heat Pump, 13 Seer R-410A units.
ANZ130[18/24/30]1AB Reversing valve change from Dunan to new SanHua reversing valve
ANZ130481AB Ranco 0151M00020 reversing valve changed to new SanHua 0151R00070 reversing valve
ANZ130241AC Create new Motor & Replace 0131M00294 with 0131M00800
ANZ130601AB Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
N-
BASE
R410A HEAT PUMP 13 SEER
Z-
ANZ1 4
MANA® BRAND SPLIT SYSTEM
A
Model/Rev Description
ANZ140(18-60)1AA
ANZ140(24-30)1AB Energy guide update.
ANZ140181AB
Introduction of ready 15, 14 SEER heat pumps to meet the 2015 energy efficiency
requirement.
Minor revisions on OD units ZP14K6 compressors without hard start kit.
14S 1.5T HPs ONLY.
N-
BASE
R410A HEAT PUMP 14 SEER
Z-
ANZ140421AB
ANZ140491AB
ANZ140[181, 301]AC
ANZ140361AB
ANZ140[421, 491]AC
ANZ140[481, 601]AB
ANZ140[181,301]AD
ANZ140361AC
ANZ140241AD Equivalent motor with Aluminum Windings replacing Copper Windings.
ANZ140[481,601]AC Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
Change from copper wound motor to aluminum wound motor.
Refrigerant Charge Reduction
Refrigerant Charge Reduction
16
PRODUCT IDENTIFICATION
Split System Heat Pumps
DSZ16
ELUXE SPLIT
D
Model/Rev Description
DSZ160**1AA Initial release of Deluxe Goodman 2-stage 16 SEER heat pumps with R-410A.
DSZ160241AC
DSZ16036, 48, 60]1AB
Sanhua (RANCO) reversing valves.
R410A HEAT PUMP 16 SEER
Z-
DSZ18
ELUXE SPLIT
D
Model/Rev Description
DSZ180**1AA Initial release of Deluxe Goodman 2-stage 18 SEER heat pumps with R-410A.
DSZ180[36, 48, 60]1AB Sanhua (RANCO) reversing valves.
R410A HEAT PUMP 18 SEER
Z-
17
PRODUCT IDENTIFICATION
Split System Heat Pumps
VSZ13
ALUE SPLIT
V
Model/Rev Description
VSZ13**1AA Initial release of Value Line 13 SEER heat pumps with R-410A.
VSZ130[24 & 30]1AB Improved circuiting for effective defrost.
VSZ130[24 & 36]1BA Initial release of models with 5mm Smart Coil™.
VSZ130[18, 42, 48]1AB
VSZ130241BB
VSZ130301AC
VSZ130[24 & 36]1BC
VSZ130301AE
VSZ130[18, 42 & 48]1AD
VSZ130[18, 42-60]1AC
VSZ130301AD
VSZ130241CA
VSZ130181AE
VSZ130421AF
VSZ130361BD
VSZ130301AF
VSZ130481AE
Models containing crankcase heater, CCH switch and upgraded defrost control.
Release of single phase models with new 6 pole motor.
Relocation of low pressure switch from liquid line to suction line as a compressor
safeguard to prevent low pressure from entering.
Release of 2 Ton models with a compressor change from ZP21K5EPFV130 to
ZP20K5EPFV130.
Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
post on 26" and 29" chassis.
Single phase models with new 6 pole motor.
Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
post on 26" and 29" chassis.
R410A HEAT PUMP 13 SEER
Z-
VSZ130421AF Compressor change from ZP36K5EPFV130 to ZP34K5EPFV130.
VSZ130241CB
VSZ130181AF
VSZ130241BD
VSZ130301AG
VSZ130481AF Ranco 0151M00020 reversing valve replaced by SanHua 0151R00070 reversing valve
VSZ130241BE Create new Motor & Replace 0131M00294 with 0131M00800
VSZ130601AD Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
2 Ton models changing from the current four piece louver assembly, to a two piece louver
plus a corner post on Goodman and value series 26" and 29" chassis.
Reversing valve change from Dunan to new SanHua.
18
PRODUCT IDENTIFICATION
Split System Heat Pumps
VSZ14
ALUE SPLIT
V
Model/Rev Description
VSZ14[018-060]1AA Introduction of ready 15, 14 SEER heat pumps to meet the 2015 efficiency requirement.
VSZ140(18-30)1AB Energy guide update. PCBDM160 with new software.
R410A HEAT PUMP 14 SEER
Z-
VSZ140421AB
VSZ140491AB
VSZ140[181,301]AC
VSZ140[361,481,601]AB
VSZ140[181, 301]AD
VSZ140361AC
VSZ140[241, 421, 491]AC
VSZ140241AD
VSZ140[481,601]AC
Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
Refrigerant charge reduction.
Change from copper wound motor to aluminum wound motor.
Refrigerant Charge Reduction
Equivalent motor wit h Aluminum Windings replacing Copper Windings.
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
19
PRODUCT IDENTIFICATION
Split System Heat Pumps
GSZ13
OODMAN SPLIT
G
Model/Rev Description
GSZ13**1AA Initial release with Regal Beloit motor.
GSZ13**1AB
GSZ13**3AA
GSZ13**4AA
GSZ130[24 & 30]1AC Release of minor revision with improved circuiting for effective defrost.
GSZ130[24 & 36]1BA Initial release of models with 5mm Smart Coil™.
GSZ130241CA
GSZ130241CB
GSZ130[18, 42-60]1AC
GSZ130301AD
GSZ130361BB
GSZ130[18,42,48,60]1AD
GSZ130301AE
GSZ130[36,48,60{3,4]AB
GSZ130[48,60{3,4]AB
GSZ130[18,42,48]1AF
GSZ130301AG
GSZ130[36,48]3AD
GSZ130484AC
Initial release with Broad Ocean motor.
Release of 2 Ton models with a compressor change from ZP21K5EPFV130 to
ZP20K5EPFV130.
2 Ton models changing from the current four piece louver assembly, to a two piece louver
plus a corner post on Goodman and value series 26" and 29" chassis .
Release of models containing crankcase heater, CCH switc h and upgraded defrost control.
Relocation of low press ure switch from liquid line to suction line as a compress or safeguard
to prevent low pressure from entering.
Changing from the current four piece louver ass embly , to a two piece louver plus a c orner
post on Goodman and value series 26" and 29" chassis.
R410A HEAT PUMP 13 SEER
Z-
GSZ130361BC
GSZ130[42 & 48]1AE
GSZ130361BD
GSZ130421AF
GSZ130[36 & 48]3AC Release of 3 phase models with new 6 pole motor.
GSZ14**1AA Initial release of 14 SEER models.
GSZ130481AG
GSZ130483AE
GSZ130484AD
GSZ130[191,311] AD
GSZ130241BE
GSZ130251AC
GSZ130601AE Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Releas e of models with new 6 pole motor/fan combination.
Models wit h new 6 pole motor/fan combination. Changing from the c urrent four piece louver
assembly, to a two piece louver plus a corner post on Goodman and value series 26" and
29" chassis.
Releas e of two piece louver plus corner post on 26" and 29" chassis with compressor
changing from ZP36K5EPFV130 to ZP34K5EPFV130.
Replac ed Ranco revers ing valve 0151M00020 with SanHua 0151R00070 reversing valve .
Create new Motor & Replace 0131M00294 with 0131M00800
20
PRODUCT IDENTIFICATION
GSZ14
OODMAN SPLIT
G
Model/Rev Description
GSZ140(18-60)1KA
GSZ140491AA
GSZ140(18-30)1KB Energy guide update. PCBDM160 with new software.
Introduction of ready 15 14 SEER heat pumps to meet the 2015 energy efficiency
requirement .
R410A HEAT PUMP 14 SEER
Z-
Split System Heat Pumps
GSZ140301KC
GSZ140361KB
Migrating from copper to aluminum motors.
GSZ140[421,491]KB Motor ch ange on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Incre ase blade gap.
GSZ140181KC
GSZ140361KC
GSZ140[241,301]KD
GSZ140[481,601]KB
GSZ140[241, 301]KE
GSZ140[481, 601]KC
GSZ140181KD
GSZ140[421, 491]KC
GSZ140241KF
GSZ140371AB
Refrigerant charge re duction.
New mod el re visions, GSZ140241KD, GSZ140301KD, GSZ140481KB and GSZ140601KB
will have the BOMs changed and have a lower refrigerant charge.
New model revisions to deplete current overstock of Ranco reversing valves
Change from copper wound motor to aluminum wound motor.
Refrigerant Charge Reduction
Equivalent motor with Aluminum Windings replacing Copper Windings.
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
GSZ140[481,601]KD
GSZ16
OODMAN SPLIT
G
R410A HEAT PUMP 16 SEER
Z-
Model/Rev Description
GSZ160[18-48]1BA Initial release of Goodman 16 S EER, 13 EER Heat Pumps with 9.0+ HSPF
GSZ1160601BA Initial release of Goodman 5 Ton 16 SEER, 13 EER Heat Pumps
GSZ160241BB
GSZ160301BB
GSZ160181BB 16 SEER 1.5T Heat Pumps, Remove Hard Start Kit
GSZ160181BC Equivalent motor with Aluminum W indings replacing Copper Windings.
GSZ160181BD
GSZ160[241, 301]BC
GSZ160[361, 421,481,601]BB
GSZ160[361, 481]BC Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Motor change on 3 & 3.5T 14 SEER & 2 & 2.5T 16 SEER. Increase blade gap.
Swit ching current Goodman 16SEER condensers and heat pumps with grille tops to louver
tops to be consistent with other Goodman units having louver-style top panels.
21
PRODUCT IDENTIFICATION
Split System Heat Pumps
SSZ14
PECIAL HIGH FEATUR E SPLIT
S
Model/Rev Description
SSZ140**1AA Initial release of Goodman 14 SEER Heat Pump R410A.
SSZ140**1AB Screw locations moved in the top panel, base pans, louvers, and control box covers.
SSZ140**1AC Broad Ocean Motors.
SSZ140181AC
SSZ140241AF
SSZ140301AD
SSZ140361AF
SSZ140[42-60]1AD
SSZ140241AG Smaller B1227315 reversing valve.
SSZ140[18, 30, 42-60]AE
SSZ140241AH
SSZ140361AG
SSZ140[18, 30, 42-60]AF
SSZ140241AJ
SSZ140361AH
SSZ140[18,30]1AH
SSZ140241AL
SSZ140361BB
SSZ140140[18, 30]1AJ
SSZ140[19, 25]1AC
SSZ140[31, 37]1AC
SSZ140241AM
SSZ140361BCC
SSZ140381AB
SSZ140140381AB
SSZ140[42-60]AH
SSZ140[18-60]1AD
SSZ140361AF
SSZ140[42-60]1AD
Discharge line mufflers added.
Added discharge line mufflers. Replaced TXV and compensator with flowrator and
accumulator.
Sanhua (RANCO) reversing valves.
Introduction of heat pumps with accumulators, crankcase heaters, and upgraded defrost
control.
Changed from four-piece louver ass embly to a two piece louver assembly. Added a corner
post on Goodman 26" and 29" chassis.
Revision made for design improvement.
Relocation of low pressure switch from liquid line to suction line as a compressor
safeguard to prevent low pressure from entering.
Chassis size reduction from large to medium.
R410A HEAT PUMP 14 SEER
Z-
SSZ140381AA Initial release of 35" chassis with 6-channel flowrator and ZP29K5 compressor.
SSZ140[18-30]1BA Updated ratings and agency information.
SSZ140241BB
SSZ140251AE
SSZ140361BE
SSZ140371AE
SSZ140[421,481,601]AK
22
Change from copper wound motor to aluminum wound motor.
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
PRODUCT IDENTIFICATION
Split System Heat Pumps
SSZ16
PECIAL HIGH FEATURE SPLIT
S
Model/Rev Description
SSZ160**1AA Initial releas e of Goodman 16 SEER Heat Pump R410A.
SSZ160**1AB Screw locations moved in the top panel, base pans, louvers, and control box covers.
SSZ160**1AC
SSZ16[024-48]1AC
SSZ160601AD
SSZ160361AF
SSZ160[42-60]1AD
SSZ160241AF
SSZ160[36, 48]1AD
SSZ160601AE
SSZ160241AF
SSZ160[36-48]1AE
SSZ160601BA
SSZ160241AH
Broad Ocean Motor. Updated muffler and standardized TXV. Compensator using ASZ18
SEER weldment to the SSZ160601AC.
Discharge line mufflers added.
Added discharge line mufflers. Replaced TXV and compensator with flowrator and
accumulator.
Sanhua (RANCO) reversing valves.
Introduction of heat pumps with accumulators, crankcase heaters, and upgraded defrost
control.
Changed from four-piece louver assembly to a two piece louver assembly. Added a corner
post on Goodman 26" and 29" chassis.
R410A HEAT PUMP 16 SEER
Z-
SSZ160601BB Ultratech® compressor
SSZ160241AK Change from copper wound motor to aluminum wound motor.
23
PRODUCT IDENTIFICATION
ging
Split System Condensers
GSX13
OODMAN BRAND SPLIT
G
Model/Rev Description
GSX130**1AA Initial release of Goodman 13 SEER R-410A Condensers with Regal Beloit motors
GSX13061[1/3/4]AA
GSX130363AB
GSX130484AB
GSX130603AB
GSX130604AB
GSX130**1AB Broad Ocean motors.
GSX130483AB 3 Phase model with new 6 pole motor.
GSX130483AC
GSX130181EA
GSX130181EB
GSX130**1BA
GSX130**3AA
GSX130**4AA
GSX130301BB Replaced fan mot or to -294 and fan blade to -18 on GSX130301BA models.
GSX130[42, 48]1BC
GSX130301BC
GSX130601BB
GSX130[42, 48]1BB New 6 pole motor/fan combination.
Introduction of Goodman 13 SEER R-410A Condensers that supplement our current 5 ton
models.
Changed from the current four piece louver assembly, to a two piece louver plus a corner
post on Goodman and value series 26" and 29" chassis.
3 phase model chan
plus a corner post on Goodman and value series 26" and 29" chassis.
Introduction of 1.5 ton condenser with Rechi Compressor.
Introduction of Goodman 13 SEER R-410A Condensers using SmartCoil® coils. Units will
have new louvers because units are smaller. Piston s ize c hange. Other components
unchanged.
Changed from the current four piece louver assembly, to a two piece louver plus a corner
post on Goodman and value series 26" and 29" chassis.
R410A CONDENSERS 13 SEER
X-
from the current four piece louver ass embly, to a two piece louver
GSX130181CA Rotary c ompressor.
GSX130421CA
GSX130481CA
GSX130361CA Replaced current compressor with compressor ZP29K5EPFV130.
GSX130[18-36]1DA Condenser conversion to 23" chassis for the 1.5 - 3 ton models.
GSX130181ED
GSX13031DB
GSX130361EA Introduction of Goodman 3 ton conversion from 29" chassis to 26".
GSX130361EB
GSX130371AA Improved decibel ratings for Canadian market.
GSX130181EF Change from motor 0131M00276 to 0131M00593 on units GSX130181 & VSX130181
GSX130363AD Change from copper wound motor to aluminum wound mot or.
GSX130241EC
GSX130301BF
Introduction of Goodman 3.5 and 4 ton 13 SEER condensing units wit h reciprocating
compressor.
Changed from a 4 leg Rechi Compressor 50N382XV-ZAKM to 3 Leg Rechi Compressor
50N382XV-5AKM. Changed Suction line Assy from 0210R01608 to 0210R01406. This
minor
Improved coil circuit assembly for greater capac ity/efficiency and a new discharge tubing
assembly.
Changed from the current four piece louver assembly, to a two piece louver plus a corner
post on Goodman and value series 26" and 29" chassis.
Create new Motor & Replace 0131M00294 with 0131M00800
*GSX13 CONTINUED ON THE NEXT PAGE
24
PRODUCT IDENTIFICATION
Split System Condensers
GSX13
OODMAN BRAND SPLIT
G
Model/Rev Description
GSX130611AC Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
GSX130241ED
GSX130[301,601]B G
GSX130361EE
GSX130[421,481]B F
Fact ory Refrigerant Charge Optimization
R410A CONDENSERS 13 SEER
X-
25
PRODUCT IDENTIFICATION
GSX14
OODMAN BRAND SPLIT
G
Model/Rev Description
GSX14**1AA Introduction of Goodman 14 SEER R-410A models.
GSX140[18-19]1KA
GSX140[24-25]1KA
GSX140[30-31]1KA
GSX140[36-37]1KA
GSX140[42, 48, 60]1KA
GSX140241KB Replaced 1/12hp fan motor with 1/ 8hp fan motor.
GSX140311AA Introduction of 12.2 EER air conditioning units .
GSX140[30-36,42]1KB Migrating from copper to aluminum motors .
GSX140251LA
GSX140241LB
GSX140191KB
GSX140361KC
GSX140371KB
GSX140421KC
GSX140 [431,481,601]KB
Goodman
condenser 5mm architecture with updated scroll c ompressors.
Changed compress or from K5 to K6, Changed coil slab from 25" tall to 30" tall, Changed
louvers from 24" tall to 29" tall
Create minor revisions of the new Rechi 2.0T units to cons ume the excess inventory of
19P fan motor
Remove HS Kit from Control Panels of condenser units with updated
ZP14K6E scroll compressors.
Refrigerant charge reduct ion.
plit X 14 Seer Condensing units. Introducing the Goodman 14 SEER standard
S
R410A CONDENSERS 14 SEER
X-
Split System Condensers
GSX140311KB
GSX140371KC
GSX140431KC
GSX140[481,601]K C Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Change from copper wound motor to aluminum wound motor.
26
PRODUCT IDENTIFICATION
Split System Condensers
GSX16
GOODMAN BRAND SPLIT X-R410A CONDENSERS 15 AND 16 SEER
Model/Rev Description
GSX160**1FA Initial release of the Goodman 16 SEER R410A Condensers.
GSX160611FA New high capacity 5 ton model that will supplement the c urrent GSX160601 models.
GSX160[18-61]1FB Minor revision for GSX16s to inc lude ball valves 0151R00045 and 0151R00046.
GSX160601GA 7mm coils.
GSX160(48/60/61)1FB Ball valve change from 0151R00046 to 0151R00081
GSX160(18/24/30/36)1FC Migrating from c opper to aluminum motors.
GSX160(18/24/30/36)1FC
GSX160(42/48/60/61)1FC
GSX160311AA
GSX160371AA
GSX160[241, 301, 601]FE
GSX160[311,371]AB
GSX160[181,361,421,481,611]FE
GSX160[241,301]FF
GSX160[311,371]AC
GSX160[481,611]FF Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Ball Valve Re-work 0151R00045 & 0151R00046
Initial release creates and launches 2 new SKUs in the 16 SEER single-stage AC
product line.
Refrigerant charge reduction.
Equivalent motor with Aluminum Windings replacing Copper Windings.
Switching current Goodman 16SEER condensers and heat pumps with grille tops to
louver tops to be consistent with other Goodman units having louver-style top
panels.
27
PRODUCT IDENTIFICATION
Revisi
Split System Condensers
SSX14
PECIAL HIGH FEATURE SPLIT
S
Model/Rev Description
SSX140**1AA Initial release of Goodman 14 SEER AC 410A.
SSX140**1AB
SSX14018, 241AC Revised condenser coils by removing [1] haripin.
SSX140301AC Model contains the Broad Ocean motor 0131M00060
SSX14036-601AC Models contain the Broad Ocean motor 0131M00061
SSX14030,361AD Revised condenser coils by removing [1] haripin.
SSX140421AD Introduces SSX140421A in 29" base pan
SSX140[18-24]1BA
SSX140[30-36]1BA
SSX140421CA
SSX140[18-36]1BC
SSX140421CC
SSX140[18-36]1BD
SSX140421CD
SSX140481BB
SSX140601AG
SSX140421BA
ons have screw locations moved in the top panel, base pans, louvers, and control
box covers.
Converts 1.5 - 3.5 ton condenser coil tubes from 3/8" tube diameter to 5mm tube
diameter.
Changing from the current four piece louver assembly, to a two piece louver plus a corner
post on Goodman and value series 26" and 29" c hassis.
Revision made for design improvement.
Revision for SSZ140421B* in 29 base pan and it will the reduce the unit charge from 180
oz. to 170 oz. and replace the 1/4 hp outdoor unit motor with 1/6 hp motor.
R410A CONDENSERS 14 SEER
X-
SSX14030-421AE Revised condenser coils by removing [1] haripin.
SSX140[18-48]1BA
SSX14042-481CA
SSX140[18-36]1BB
SSX140421CB
SSX140601AF
Introduction of Goodman 14 SEER R-410A Condensers with SmartCoil® Coils.
Relocation of low pressure switch from liquid line to suction line as a compressor
safeguard to prevent low pressure from entering.
28
PRODUCT IDENTIFICATION
Split System Condensers
SSX16
PECIAL HIGH FEATURE SPLIT
S
Model/Rev Description
SSX160**1AA Introduces Goodman 16 SEER AC 410A
SSX160**1AB
SSX160**1AB
SSX160591AA
SSX160[24, 36, 48]1BA
SSX160[30 & 42]1AA
SSX160[24, 36]1BC
SSX160[30, 42]1AB
SSX160601BA ZPS49K compressor.
SSX160[24,36,60]1BB
New revisions have screw locations moved in the top panel, base pans, louvers, and
control box covers.
New revisions have screw locations moved in the top panel, base pans, louvers, and
control box covers.
SmartCoil® coils.
Changing from the current four piece louver assembly, to a two piece louver plus a corner
post on Goodman and value series 26" and 29" c hassis.
Relocation of low pressure switch from liquid line to suction line as a compressor
safeguard to prevent low pressure from entering.
R410A CONDENSER 16 SEER
X-
DSX16
ELUXE SPLIT
D
Model/Rev Description
DSX160**1AA Initial release of Goodman 2-stage, 16 SEER condensing units with R-410A.
R410A HEAT PUMP 16 SEER
X-
DSX160[24, 36]1BA Conversion of 2 & 3 ton models to SmartCoil® Coils.
DSX160241BC Introduces Ultratech® 2.0 compressor changes.
DSX18
ELUXE SPLIT
D
Model/Rev Description
DSXC18**1AA Intial release of 2-stage condensing units with R-410A communicating models.
DSXC18036AB
DSXC18048AB
DSXC18060AB
DSXC18036AC
DSXC180[48-60]AC Intial release of Ultratech 2.0 to communicating condensing units
Updated wiring diagram with notes for communicating condensing units.
Replaced existing compressor ZPS20K4EPFV230 to ZPS20K5EPFV130 & existing
compressor ZPS30K4EPFV230 to ZPS30K5EPFV130 for communicating condensing
units.
R410A HEAT PUMP 18 SEER
X-
29
PRODUCT IDENTIFICATION
Split System Condensers
VSX13
ALUE SPLIT
V
Model/Rev Description
VSX130[18-48]1AA Introduces Value Line 13 SEER condensing units with R-410A.
VSX130611AA Supplements the 5 ton model GSX130611 to enhance performance.
VSX130301AB Replaced fan motor to -294 and fan blade to -18 on the VSX130301AA.
VSX130301AC
VSX130[42-48]1AC
VSX130[42-48]1AB Replaced with 6-pole motor and Copeland compressor.
VSX130181BA Rotary compressor.
VSX130181EA
VSX130181EB
VSX130181ED
VSX130241BA
VSX130361BA Replaced current compressor with compressor ZP29K5EPFV130.
VSX130361EB
Changed from current four piece louver assembly to a two piece louver assembly plus a
corner post on Goodman and value series 26" and 29" chassis.
Introduction of 1.5 ton condenser with Rechi Compressor.
Changed 4-leg Rechi Compressor 50N382XV-ZAKM to 3-Leg Rechi Compressor
50N382XV-5AKM. Changed Suction line Assy from 0210R01608 to 0210R01406.
2.0 ton condensing units with aluminum coils, aluminum manifolds w/existing scroll
compressor.
Changed from current four piece louver assembly, to a two piece louver plus a corner post
on Goodman and value series 26" and 29" chassis.
R410A CONDENSER 13 SEER
X-
VSX130601BA Condensing units with SmartCoil® coils.
VSX130601BB
VSX130421BA
VSX130481BA
VSX130[18-36]1DA 3.5 and 4 ton 13 SEER Condensers conversion to 23" chassis for the 1.5 - 3 ton models.
VSX130301DB
VSX130301EA
VSX130241EA
VSX130371AA 2.5 13 SEER Condensers with improved decibel ratings for Canadian market.
VSX130241EB Compressor wires yellow, red and black changing from 40" to 45".
VSX130181EF Change from motor 0131M00276 to 0131M00593 on units GSX130181 & VSX130181
VSX130241ED
VSX130301AF
VSX130611AC Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Changing from the current four piece louver assembly, to a two piece louver plus a corner
post on Goodman and value series 26" and 29" chassis.
3.5 and 4 ton 13 SEER condensing units with reciprocating compressor.
2.5 13 SEER Condensers with improved coil circuit assembly for greater
capacity/efficiency and the creation of a new discharge tubing assembly.
3 Ton 13 SEER Condensers release of 3 ton models converting from 29" chassis to 26"
chassis.
2.0 Ton 13 SEER Condensers with Rechi Compressor, converting 23" chassis to 26"
chassis
Create new Motor & Replace 0131M00294 with 0131M00800
VSX13[241,361]EE
VSX130301AG
VSX130[421,481]AF
VSX130601BE
30
Factory Refrigerant Charge Optimization
Loading...