GOOD LIFE Dog Silencer Instruction Manual
Dog Silencer™ Instruction Manual
Included In Your Package
AC ADAPTERDOG SILENCER 60’ EXTENSIONREMOTE CONTROL
Sold Separately
Before We Get Started
WHAT IS ULTRASONIC SOUND?
Ultrasonic sounds are frequencies that are higher than the range of human hearing. However, they can be very irritating to dogs.
Ultrasonic sound has been used for over a century to successfully train dogs.
HOW LONG WILL TRAINING TAKE?
Some dogs take longer to train than others and bad habits are sometimes hard to break. Allow 2-3 weeks to see results.
WHERE CAN I USE IT?
You can stop barking from anywhere that you have a clear line of sight. Hang your Dog Silencer on a tree, set it on top of a fence…
the list goes on.
It’s Time to Stop Barking. Ready?
1
Plug it in or Use Batteries
I WANT TO USE BATTERIES
AA SIZ E LR6 1.5 V
AA SIZ E LR6 1.5 V
AA SIZ E LR6 1.5 V
AA SIZ E LR6 1.5 V
AA SIZ E LR6 1.5 V
AA SIZ E LR6 1.5 V
DC 9V
I’D RATHER PLUG IT IN
OPTIONAL
EXTENSION
Use 6 AA batteries for areas that don’t have an AC
outlet nearby. This is an ideal option for large yards
and dogs that are far away from a power source.
Important!
Remove the batteries when using AC power.
Use the AC adapter when close enough to a power source. You
can also use the optional extension (sold separately) for longer
distances. Ideal for indoors, smaller yards, and close to your home.
Dog Silencer™ Instruction Manual
How Far Away is the Dog?
2
2A Lift the rubber grommet on the side of the Dog
Silencer and slide the Power Switch to ‘Ultra’.
Turn Dial Almost
All the Way Up
To silence dogs
farther than 75’
use the remote
300 ft
BARK DETECTION WORKS UP TO 75 FEET
2B Place the Dog Silencer in a location where it has a clear line of sight to
the dog. From there, adjust the Bark Sensitivity Dial as shown below:
Turn Dial
Halfway Up
50 ft
Turn Dial Almost
All the Way Down
25 ft75 ft
OFF
ULTRA
AUDIO
Installing Your Dog Silencer
3
WHERE DOES IT GO?
You have several options. Set the Dog Silencer on a at surface, or for extra stability, pull out the sliding mounts on the bottom
and fasten it down. You can also hang the Dog Silencer anywhere you can put a screw or nail by using the keyholes on the back of
the device.
DO I NEED A CLEAR LINE OF SIGHT?
Yes, ensure that you have a clear line of sight between the Dog Silencer and the dog you are trying to train. Ultrasonic sound will
not travel through solid objects like walls or fences.
WHEN DO I USE THE REMOTE?
Use the remote when you want to activate the Dog Silencer manually or when the dog is outside the 75 foot automatic
bark detection range. It will work up to about 100 feet from the unit, and silence dogs up to 300 feet away.
Want the Dog Silencer to activate only when you use the remote?
Simply turn the Bark Sensitivity Dial all the way down so that the unit won’t activate when the dog barks.
More About The Remote: The Dog Silencer must be turned on (set to either ‘Audio’ or ‘Ultra’) in order for the remote to work. The remote, which uses a 12V 23A battery, will not turn the unit on or
o. Since there is no door on the remote to access the battery, we recommend calling Customer Care rather than trying to change it yourself.
Success
4
Congratulations! You’re all set.
In the unlikely event you run into any issues, please see the “Troubleshooting” section on the next page or contact us using the
information under “We’re Here to Help”.
Loading...