ACHTUNG! Lesen Sie die Bedienungsanleitung vollständig und sorgfältig durch.
Sie ist Bestandteil des Produktes und enthält wichtige Hinweise zur korrekten
Inbetriebnahme und Benutzung. Bewahren Sie sie auf, damit Sie diese bei
Weitergabe des Gerätes an andere Personen übergeben können.
Ihr NTS EuP Netzteil ist ein universales, umweltfreundliches und sicheres Schaltnetzteil für
Notebooks, N@tbooks, LCD-Displays, usw. Es verfügt über verpolungssichere Adapterstecker für viele gängige Modelle und 2 separate 5 Volt USB-Ausgänge zum Laden oder
Betreiben von MP3-Playern, Digitalkameras, Handys, usw. Das Netzteil wird auf die
passende Ausgangsspannung eingestellt. Die maximale Ausgangsleistung entnehmen Sie
den technischen Daten. Das Gerät erfüllt die EuP-Richtlinie mit besonderer Energieefzienz, Klasse 4.
Sicherheitsausstattung: - kurzschlusssicher
- Überladungsschutz
- Verpolschutz
- geringer Standby-Stromverbrauch
2 Bestimmungsgemäßer Gebrauch:
Ihr Produkt ist nur zum Laden und betreiben der in Kapitel 1 genannten Geräte
vorgesehen. Ein anderer Gebrauch ist nicht gestattet. Die Verwendung darf nur in
trockenen Innenräumen erfolgen. Das Nichtbeachten und Nichteinhalten dieser
Bestimmungen und der Sicherheitshinweise kann zu schweren Unfällen und Schäden an
Personen und Sachen führen.
2
3 Sicherheitshinweise:
ACHTUNG! Die Montage und Demontage des Produktgehäuses sowie die
Wartung der Elektronik darf nur durch ausgebildetes Elektro-Fachpersonal
erfolgen! Es besteht u. a. Stromschlag- und Kurzschlussgefahr!
• Ihr Produkt ist kein Spielzeug und gehört nicht in Kinderhände, weil zerbrechliche,
kleine und verschluckbare Teile enthalten sind, die bei unsachgemäßem Gebrauch Per sonen schädigen können!
• Bitte installieren und Lagern Sie das Produkt und das Zubehör so, dass keine Personen
oder Sachen z.B. durch Herabstürzen oder Stolpern verletzt oder beschädigt werden
können.
• Lassen Sie Verpackungsmaterial nicht einfach liegen, da sich spielende Kinder daran
schneiden können. Weiterhin besteht die Gefahr des Verschluckens und Einatmens
von Kleinteilen und Dämmmaterial.
• Stellen Sie anhand der Bedienungsanleitung Ihres zu betreibenden Gerätes, wie
Laptop, Handy, usw. sicher, dass die Anschlüsse und Betriebsspannungen zum Netzteil
kompatibel sind und umgekehrt.
• Ein defektes Gerät darf nicht in Betrieb genommen werden, sondern muss sofort
vom Netz getrennt und gegen eine unbeabsichtigte Weiterbenutzung gesichert werden.
Im Reparaturfall darf das Gerät nur von Elektro-Fachkräften geöffnet und repariert
werden, die aufgrund ihrer Ausbildung dazu befugt sind. Ein Selbsteingriff birgt die
Gefahr eines Stromschlags und führt zum Erlöschen des Garantieanspruchs.
• Betreiben Sie das Gerät nur am 100-240 V~/ 50-60 Hz Wechselstromnetz.
• Ziehen Sie bei Nichtgebrauch und Gewitter das Netzkabel aus der Steckdose.
• Setzen Sie das Gerät keiner starken Hitze oder Feuchtigkeit aus, bzw. Stellen, die mit
Wasser in Berührung kommen können.
• Legen und stellen Sie keine Gegenstände auf das Gerät.
• Für den Einsatz in Industriebetrieben sind die entsprechenden gesetzlichen Bestim-
mungen zur Unfallverhütung einzuhalten.
• Setzen Sie das Gerät und dessen Zubehör keinen hohen mechanischen Belastungen
aus.
• Modizieren und ändern Sie den Artikel und dessen Zubehörteile nicht! Beachten Sie
dazu auch das Kapitel „Gewährleistung und Haftung“
• Verwenden Sie keine beschädigten Teile.
• Das Gerät darf nur in trockenen Innenräumen installiert und betrieben werden.
• Das Gerät erwärmt sich während des Betriebes.
• Schließen Sie den DC-Anschluss nicht kurz.
• Überlasten Sie das Netzteil nicht. Die maximale, modellspezische Leistung nden Sie
in den technischen Daten.
4 Lieferumfang:
539865398553985
- 1 x Schaltnetzteil
- 9 x DC-Adapterstecker- 6 x DC-Adapterstecker
- 1 x Einstellwerkzeug zur Spannungseinstellung
- 1 x Euro Netzstecker
- 1 x Bedienungsanleitung
3
Bedienungsanleitung
5 Bedienelemente:
Spannungswähler für die DC-Ausgangsspannung
Bild 1
53986 53985 53982
6 Bedienung:
6.1 Netzteilnutzung für Notebooks:
Ihr Notebook kann über diese Funktion betrieben und der interne Notebookakku geladen
werden.
1. Stellen Sie die benötigte Ausgangsspannung am Netzteil ein. Diese steht entweder auf
Ihrem Gerät, in dessen Bedienungsanleitung oder auf dem originalen Netzteil. Der Pfeil
zeigt auf die gewählte Ausgangsspannung wie in Bild 1.
Einstellmöglichkeiten:
Lesen Sie hierzu bitte die technischen Daten:
2. Verbinden Sie den zu Ihrem Gerät passenden DC-Adapterstecker mit der DC-Buchse
des Netzteils. Achten Sie auf richtige Passform des Steckers.
Angaben zur Polung nden Sie in der Bedienungsanleitung Ihres Gerätes oder auf dem
originalen Netzteil.
positive Polung:
HINWEIS:
4
Eine falsche Polung kann Ihr Gerät massiv beschädigen oder Ihr Gerät zeigt
keine Funktion.
3. Stellen Sie sicher, dass die Gesamtbelastung, also die Leistung Ihres Verbrauchers
die maximale Ausgangsleistung des Netzteils nicht übersteigt.
Diese Polung ist die am
häugsten verwendete
Polung und als Standard
eingestellt.
4. Verbinden Sie das Netzteil mit dessen AC-Netzkabel.
5. Schließen Sie Ihr Notebook am zuvor ausgewählten und angeschlossenen DC-Adap-
terstecker an.
6. Stecken Sie das Netzkabel in eine Netzsteckdose. Die Kontroll-LED leuchtet nun
konstant unabhängig der gewählten Ausgangsspannung bis das Netzteil wieder vom
Netz getrennt wird. Es muss eine Ausgangsspannung eingestellt sein.
7. Schalten Sie nun Ihr Notebook ein.
6.2 Nutzung der USB-Funktion:
Über die USB-Funktion können Sie Ihr USB-Gerät laden und betreiben, unabhängig
davon, ob Sie parallel Ihr Notebook laden oder betreiben.
1. Verbinden Sie Ihr USB-Gerät, wie MP3-Player, Handy oder PDA über ein passendes
USB-kabel mit dem USB-Ausgang des Netzteils. Die maximale Ausgangsleistung
beträgt 2,5 Watt pro USB-Ausgang.
5 V bei 0,5 A (max. 2,5 Watt).
2. Stellen Sie sicher, dass die Gesamtbelastung, also die Leistung Ihres Verbrauchers
die maximale Ausgangsleistung des Netzteils nicht übersteigt.
3. Verbinden Sie das Netzteil mit dessen AC-Netzkabel.
4. Stecken Sie das Netzkabel in eine Netzsteckdose. Die Kontroll-LED leuchtet nun
konstant unabhängig der gewählten Ausgangsspannung bis das Netzteil wieder vom
Netz getrennt wird.
5. Schalten Sie nun Ihr USB-Gerät ein.
7 Pege, Wartung, Lagerung und Transport:
ACHTUNG! Es besteht Stromschlag- und Kurzschlussgefahr!
• Das Gerät ist wartungsfrei.
• Ziehen Sie immer zuerst den Netzstecker!
• Reinigen Sie Ihr Produkt mit einem trockenen oder bei starker Verschmutzung mit einem
leicht angefeuchteten Leinentuch. Verwenden Sie keine Reinigungsmittel und lassen Sie
keine Feuchtigkeit ins Geräteinnere kommen. Achten Sie hierbei unbedingt auf die
stromführenden Leitungen Ihres Gerätes!
• Vermeiden Sie Stellen mit hohen Temperaturen, Feuchtigkeit, bzw. Stellen, die nass
werden können, auch bei Pege, Wartung, Lagerung und Transport.
• Beachten Sie die Sicherheitshinweise bzgl. Pege, Wartung, Lagerung und Transport.
• Das Produkt muss außerhalb des Einussbereiches von Kindern aufbewahrt werden.
• Heben Sie die Originalverpackung als Staub- und Feuchtigkeitsschutz und für den
Transport auf. Achten Sie auf die Sicherheitszeichen auf der Verpackung.
5
Bedienungsanleitung
8 Problembehebung:
ProblemMaßnahme
Das Netzteil funktioniert nicht.Achten Sie auf die richtige Ausgangsspannung
Die Ladefunktion arbeitet nicht.Beachten Sie den Ladestatus Ihres Akkus.
Die USB-Funktion ist gestört.Lesen Sie kapitel 6.2 und achten Sie auf schlüs-
andere FragenWenden Sie sich an Ihren Händler.
9 Gewährleistung und Haftung:
• Der Hersteller gewährt 2 Jahre Garantie.
• Da der Hersteller keinen Einuss auf örtliche Gegebenheiten und die Installation des
Produktes hat, deckt die Garantie nur das Produkt selbst ab.
• Falls ein Fehler oder Defekt an Ihrem Gerät festgestellt werden sollte, wenden Sie sich
bitte an Ihren Fachhändler und zeigen Sie ggf. Ihre Quittung oder Rechnung als
Kaufnachweis vor. Ihr Händler wird den Fehler entweder vor Ort beheben, oder das
Gerät an den Hersteller weiterleiten. Sie erleichtern unseren Technikern Ihre Arbeit sehr,
wenn Sie eventuelle Fehler ausführlich beschreiben – nur dann haben Sie Gewähr,
dass auch selten auftretende Fehler mit Sicherheit gefunden und beseitigt werden!
• Der Hersteller haftet nicht für Personen- oder Sachschäden, die durch unsachgemäße
Installation oder Bedienungsschritte, die nicht in dieser Anleitung beschrieben sind,
entstanden sind. Dazu zählt u. a. jegliche Änderung und Modikation des Produktes und
seines Zubehörs.
• Ein anderer als in dieser Bedienungsanleitung beschriebener Einsatz ist unzulässig und
führt zu Gewährleistungsverlust, Garantieverlust und Haftungsausschluss.
• Druckfehler behält sich der Hersteller vor.
• Der Hersteller behält sich weiterhin das Recht vor, Änderungen an Geräten, Verpackun gen und sämtlichen Begleitpapieren wie Bedienungsanleitungen ohne vorherige
Ankündigung zu vollziehen.
und Polung des DC-Adaptersteckers. Achten
Sie auf schlüssige Kabelverbindungen.
Achten Sie die richtige Ausgangsspannung und
Polung des DC-Adaptersteckers. Achten Sie auf
schlüssige Kabelverbindungen.
sige Kabelverbindungen.
10 Technische Daten:
Modell539865398553982
Betriebsspannung100-240 V~ AC / 50- 60 Hz
Ausgangsspannung Netzteil 9,5 - 20,0 V DC 9,5 - 24 V DC15,0 - 24,0 V DC
USB2 x 5,0 V DC
max. Ausgangsstrom3,5 A3,6 A4,0 A
DC Adaptersteckergrößen
NetzsteckerEuro
LUJ, LUAA, LUE, LUL, LUAD,
LUAK, LUF, LUM, LUNG
6
LUJ, LUAA, LUE, LUL, LUAD,
LUAK, LUF, LUM, LUNG
UH, LUJ, UAB, LUAA ,
LUE, LUG
max. Ausgangsleistung65 W72 W90 W
Gewicht340g 330g 356g
Maße112 x 49 x 30 mm134 x 56 x 33 mm134 x 56 x 33 mm
Elektrische und elektronische Geräte dürfen nach der europäischen WEEE
Richtlinie nicht mit dem Hausmüll entsorgt werden. Der Verbraucher ist nach
dem ElektroG verpichtet, elektrische und elektronische Geräte am Ende ihrer
Lebensdauer an den dafür eingerichteten, öffentlichen Sammelstellen oder an
die Verkaufsstelle kostenlos zurückzugeben. Einzelheiten dazu regelt das
jeweilige Landesrecht. Das Symbol auf dem Produkt, der Gebrauchsanleitung oder der
Verpackung weist auf diese Bestimmungen hin. Mit dieser Art der Verwertung von
Altgeräten leisten Sie einen wichtigen Beitrag zum Schutz unserer Umwelt.
12 CE-Konformitätserklärung:
Dieses Gerät ist mit der nach den Richtlinien 2004/108/EG, 2005/32/EG und
2006/95/EG vorgeschriebenen Kennzeichnung versehen: Mit dem CE
Zeichen erklärt Goobay®, eine registrierte Marke der Wentronic GmbH, dass
das Gerät die grundlegenden Anforderungen und Richtlinien der europäi-
schen Bestimmungen erfüllt. Diese können online auf www.wentronic.com angefragt
werden. Alle Handelsmarken und registrierten Marken sind das Eigentum ihrer jeweiligen
Inhaber.
7
Manual
Switching Mode Adaptor NTS 65 / 72 / 90 W USB MW EuP
ATTENTION! Please read the user manual completely and carefully. It is part of
the product and includes important information for proper installation and use.
Keep this guide to have it available, when there are uncertainties, or the product
will be passed on.
Content: Page:
1 Description and Function 8
2 Intended Use 8
3 Notes on Safety 9
4 Parts Package 9
5 Operating Elements 10
6 Operating 10
6.1 Using the Power Supply for Notebooks 10
6.2 Using the USB Function 11
7 Care, Maintenance, Storage and Transport 11
8 Troubleshooting 12
9 Warranty and Liability 12
10 Specications 12
11 Notes on Waste Disposal 13
12 CE Declaration 13
1 Description and Function:
Your NTS is an universal, environmental friendly and safe power supply for Notebooks,
N@tbooks, LC Displays, etc. It comes with adaptor plugs for lots of models and a seperated
5 Volts USB output for charging or operating MP3-Players, Camcorders, Mobile Phones,
etc. Your device is useable worldwide. You can select the prefered output voltage manually.
The device is conformed to the EuP Directive with special energy efciency, class 4.
Security Features: - short circuit safe
- over charging protection
- inverse-polarity protection
- low standby consumption
2 Intended Use:
Your product is made for charging and operating devices like described in chapter
1. We do not permit using the product in other ways. Use the product only in dry
interior rooms. If not attending to these regulations and notes on safety, it might
causes fatal accidents, injuries and damages to persons and property.
8
3 Notes on Safety:
ATTENTION! Only skilled electricians may assemble and disassemble the
housing of the product. There is a risk of electric shock and short circuit!
• Your product is not a toy and is not meant for children, because it contains small parts
which can be swallowed and injured when used inappropriately!
• Please install and store the product and its accessories in a way persons cannot be
injured, or objects not be damaged for example by dropping or stumbling.
• Please remove or store the packing materials well, because children may cut themsel-
ves on them while playing. Furthermore, there is a risk of swallowing and inhalating of
incidentals and insulating material.
• Also read the manual of your device, which is to be charged or operated, like Notebook,
Mobile Phone, etc. for checking the compatibility and tting of the connectors to the
power supply, and the other way round.
• A defective device may not be put into operation, but must be disconnected from mains
and protected against further use. Repairing, such as assembling and disassembling
the housing is only allowed to skilled professionals. By repairing it yourself you will
loose all warranties and there is a risk of electric shock and short circuit.
• Drive the product only with 100 to 240 V ~ / 50-60 Hz a.c. networks.
• Unplug the mains cable when not in use and during thunder storms.
• Avoid places with heat, high humidity, or places which might come into contact with
water.
• Do not place things on the device.
• Mind and follow the terms of law and health care for using the device in industry.
• Never expose the product to high mechanical pressure.
• Do not modify or change the product or its accessories! Also mind chapter “warranty
and liability“.
• Do not use damaged parts.
• The device may only be installed and used in dry interior rooms.
• The device may growing warm during use.
• Do not short circuit the DC connection.
• Do not overload the product. Mind the specic maximum power of the models and read
the Specications.
4 Parts Package:
539865398553985
- 1 pc power supply
- 9 pcs DC adaptor plugs- 6 pcs DC adaptor plugs
- 1 pc adjusting tool for output voltage
- 1 pc Euro mains plug
- 1 pc user manual
9
Manual
5 Operating Elements:
Selecting switch for DC output voltage
Fig. 1
53986 53985 53982
6 Operating:
6.1 Using the Power Supply for Notebooks:
You can operate and charge a Notebook and its battery by using this function.
1. Select the required output voltage of the power supply, required for your Notebook. Find
it on your device, in its manual or on the original power supply. The arrowhead shows the
selected output voltage. (Fig. 1)
10
possible adjustments:
Please read the Specications.
2. Connect the tting DC adaptor plug to the DC socket of the power supply. Mind the right
size of the DC plug. Find detailed Information in the manual of your device
on the original power supply.
positive polarity:
A wrong polarity can damage your device or there is no function at all.
NOTE:
3. Make sure of not overloading the product by a too high power consumption of your
device. Find the specic maximum output power in the Specications.
This polarity is the most
common one and set as
standard.
4. Connect the power supply with its AC mains cable.
5. Connect your notebook with the DC adaptor plug after selecting and plugging the right
one to your NTS power supply.
6. Plug the mains cable into a mains socket. The LED indicator ashes on and lights
continuously independent from the selected output voltage until you plug off the power
supply from mains. You must select any output voltage.
7. Now switch on your notebook.
6.2 Using the USB Function:
You can operate and charge an USB device independently from operating or charging a
notebook simultaneously..
1. Connect your USB device, like MP3-Player, Mobile Phone or PDA to the USB outlet of
the power supply by using a tting USB cable. The maximum output voltage per outlet
is 2.5 Watts.
5V at 0.5A (max. 2.5 Watts).
2. Make sure of not overloading the NTS power supply by a too high power consumption
of your USB device.
3. Connect the NTS power supply to its AC mains cable.
4. Plug the mains cable into a mains socket. The LED indicator ashes on and lights
continuously independent from the selected output voltage until you plug off the power
supply from mains.
5. Switch on your USB device.
7 Care, Maintenance, Storage and Transport:
ATTENTION! There is a risk of electric shock and short circuit!
• The device is maintenance-free.
• Always disconnect the mains plug from mains at rst!
• Use a dry linen cloth to clean your product, or use a slightly moist cloth for heavy stains.
Look out for live cables of your device during cleaning! Do not use any cleaning supplies
and avoid liquid entry to the device.
• Avoid places with high temperatures, humidity, or places which can become wet, also
during care, maintenance, storage, and transport.
• Mind the notes on safety also regarding care, maintenance, storage and transport.
• Keep the product away from children!
• Reposit the original packaging as protection from dust and humidity for transporting.
• Follow the safety symbols on the packing during transport.
11
Manual
8 Troubleshooting:
ProblemHelp
The power supply does not work.Mind adjusting the right output voltage and
polarity. Check all cable connections for
proper tting.
The charging function of the battery does
not work.
Check the charging status of the battery.
Mind adjusting the right output voltage and
polarity. Check all cable connections for
proper tting.
The USB charging function does not work.Read chapter 6.2 and mind proper connec-
tions of all cables.
other questionsContact your dealer.
9 Warranty and Liability:
• The producer grants a 2 years warranty to a new device.
• As the manufacturer has no inuence on installation, warranty of the product only
applies to the product.
• If any fault or damage is detected on your device, please contact your dealer and provide
your sales slip or invoice as evidence of the purchase, if necessary. Your dealer will
repair the fault either on site, or send the device to the manufacturer. You make the work
of our technicians considerably easier, describing possible faults in detail – only then you
can be assured that faults, occurring only rarely, will be found and repaired with
certainty! If your dealer cannot be contacted, you can also contact us directly.
• The manufacturer is not liable for damages to persons or property caused by improper
installation or operation not described in this guide. This includes, among others, any
alteration and modication of the product and its accessories.
• Any use other than described in this user manual is not permitted, and causes loss of
warranty, loss of guarantee, and non-liability.
• We reserve our right for misprints and changes of the device, packing, or user manual.
10 Specications:
Model539865398553982
operating voltage110-240 V~ AC / 50- 60 Hz
output voltage power supply9.5 - 20.0 V DC 9.5 - 24 V DC15.0 - 24.0 V DC
USB2 x 5.0 V DC
max. output current3.5 A3.6 A4.0 A
DC adaptor plugs
mains plugEuro plug
max. output power65 W72 W90 W
weight340g 330g 356g
dimensions112 x 49 x 30 mm134 x 56 x 33 mm134 x 56 x 33 mm
output power in Watts30.88-60.13 / 59.85 / 6030.88-60 / 66.9657-83.6 / 84.96
DC adaptor plugs - compatibilities:
UHLUMLUFLULLUAKLUJLUAALUADLUEUABLUAD
Sharp, Dell SamsungAsusLGHPLG, HP,
LUGLUNG
BenQ,
Joybook
Gigatech,
IBM
Asus,
Com-
paq
Dell,
Samsung,
Sony, Fujit-
su, Amilo
Sony,
Samsung,
Fujitsu,
Dell
HP,
Compaq,
NEC,
Toshiba,
Lenovo
Compaq,
Gateway,
HP, Sharp,
Winbook
Sony,
Fujitsu,
Samsung
Dell,
11 Note on Waste Disposal:
In according to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. The consumer is
committed by law to reposit electrical and electronic devices to public collec
ting points or to the dealer at the end of the devices lifetime for free. Particulars
are regulated in national right. The symbol on the product, in the manual or at
the packaging alludes to these terms. With this kind of application of used devices you
achieve an important share to environmental protection.
12 CE Declaration:
This device corresponds to EU directives 2004/108/EC, 2005/32/EC and
2006/95/EG: With the CE sign Goobay® , a registered trademark of the
Wentronic GmbH ensures, that the product is conformed to the basic
standards and directives. These standards can be requested online on
www.wentronic.com. The mentioned directives replace all former national permissions in
the European Union. All trademarks and registered brands are the property of their
respective owners.
13
Manual
14
15
Revision Date: 2010-12-06
Version 2
®
is a registered
Goobay
trademark of Wentronic GmbH
in Germany and/or other countries.
Wentronic GmbH
Pillmannstraße 12
38112 Braunschweig, Germany
Designed and Developed in Germany.
Assembled in China
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.