GONSIN DCS-3021, WAP-30, WAP-30I, HUB-D45, TC-D3 User Manual
...
DCS-3021 Conference System
User Manual
Contents
01 02
Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 Congress Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Over view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Func tions and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.1 Ba sic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
2.2.2 In dicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 7
2.3 Inst allation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 08
2.4 Conn ection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
2.4.1 Co nnection with Congress Term inal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
2.4.2 Co nnection with Wireless AP a nd C ontrol PC . . . . . . . . . . . . . . . . . . . . . . 09
2.4.3 Co nnection with Mixer or Ampl ifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4.4 Co nnection with Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4.5 Co nnection with the Dome Contro ller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.4.6 Co ngress Server Setting and Ope ration . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 3 Compositions of the Wireless Conference System. . . . . . . . . . 1 3
3.1 Func tions and Indicators of the Wir eless Congress Terminal . . . . . . . . . . 1 3
3. 1. 1 Ov erview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1.2 Ba sic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1.3 (W ireless Congress Termi na l with discussion functio n ) Indicators . . . . 13
3.2 Func tions and Indicators of Wirel ess AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2.1 Ba sic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2.2 In dicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 4
3. 2. 3 WAP-30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3 Func tions and Indicators of Cha rging Case . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3.1 Ba sic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3.2 In dicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6
3.4 Conn ection of Congress Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 4 Wireless Network Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1 Intr oduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.2 Cont rol Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.3 Freq uency Band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.4 Inst allation Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Chapter 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.1 Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.1.1 Wi reless AP Cable 8P2-1.5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.1.2 Ex tension Cable 8PS-03\05 \1 0\15\20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.1.3 UT P-Five Category Cable (opti onal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Chapter 6 Technical Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.1 Cong ress Server GONSIN30000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.2 Cong ress Term inal 3021 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.3 Char ging Case CHG-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chapter 7 Environment and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.1 Syst em Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.2 Publ ic Environment Requirem ents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
7.2.1 Technical Re quirements on Public Envi ro nment . . . . . . . . . . . . . . . . . . . . 23
7.2.2 Sy stem Operation Requirem en ts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
05
07
07
07
Chapter 8 FAQs
Appendix: 25
DCS -3021 Cong res s Sys tem
Chapter 8 FAQs
Appendix: 25
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Please carefully re ad this docum ent before 16. All GONSI N products shall be main tained
installing and using t he equipmen t. against the warranty c ard based on sy stem
category, except for p roduct issu es resultin g
2. Please keep this docu ment for futu re referenc e.
from manmade reasons o r force majeu re, for
3. Observe “Cautions ” in all operat ion guides.
example:
4. Observe the rules and p rinciples i n all
A. Equipment is dropped and broken du e to
operation guides.
manmade reasons;
5. Clean equipment: be fore cleani ng the
B. Equipment is damage d due to misope ration by
equipment, power it of f and then disc onnect all
operators;
units of the equipment . Use dry soft cl oth to
C. Some equipment spar e parts are dam aged or
clean the equipment.
missing d ue to arbitra ry disassem bly;
6. Do not use any nonconfo rming acces sory or
D. Equipment is dropped and broken du e to
fitting wit hout approval from the C ompany. It is
natural disasters.
likely to cause hazard ous acciden t.
17. Use specific cable s to connect eq uipment.
7. Do not put the equipmen t in humid plac es so as
not to cause equipment d amage or dang er. 18. Turn off the power swi tch and remov e the plug
in case that the equipme nt is not used fo r a
8. Do not place the equipm ent on an unsta ble
long time.
table; prevent equip ment vibrat ing during
transportation to av oid damage to t he 19. Keep the Warranty Ca rd in appendi x safe. The
equipment. Select pr oper packag e or original card serves as a b asis for futu re maintenance
package for transpor tation. free of charge.
9. Keep the equipment ro om ventilat ed so as to
prolong the service li fe of the equip ment.
10. Service voltage: A merica and Ja pan: AC 110V
- 120 V and 60 Hz Eur asia: AC 22 0V - 240 V
and 50 Hz
11. Power socket: thre e-pin Groun d Socket.
12. Do not place heavy obj ects on exten sion
cables necessary for e quipment co nnection.
Caution: do not open the c over; other wise, there i s
Make a detour if routing i s required to e nsure
a risk of electric shock .
normal op eration of th e system.
Before connecting, o perating or a djusting th is
13. Connect all confer ence units in t he system
product, read this doc ument caref ully.
based on system requir ements; if no t, all
This label is attached t o the back of the e quipment
equipments in the whol e system may ru n
to save area.
abnormally. Contac t GONSIN afte r-sale
service c enter in case o f special req uirements .
Technic al support Te l: 0757-223 60959.
The lightning sign rem inds users th at
hazardous voltage th at is not
14. Unless permitted b y the Company , do not
insulat ed is likely to t rigger elec tric
disassemble shell an d avoid any har d
shock.
conductor or liquid fr om leaving or p ermeating
into the shell.
15. Do not disassemble t he equipmen t on your
The excla mation mark i n the equilat eral
own when yo ur equipmen t needs servi ce.
triangle reminds use rs to operate
Contact the customer s ervice cent er of
and maintain the equip ment based
GONSIN: 400 -883-1138.
on the accompanied ope ration and
maintenance instru ctions.
Safety No tes
engineers are allowe d to install eq uipment.
03 04
In case of th e follo wing abno rmality d uring u se, turn off the pow er swit ch, take ou t the bat tery, an d keep the
equipme nt away f rom fire; i f not, th er e is a risk o f fire or exp losio n.
— —The b attery is l eakin g, changi ng color, de forme d, or damag ed.
— —The b attery is s mokin g or smelly.
Do not weld o r modif y the batte ry or cha ng e its for m; otherw ise, th e battery c ircui t may be dama ged, resu lting i n a
fire, lea kage, e ven explo sion.
Avoid t he batt er y short ing (anod e and cat hode) by el ectric wi re or met al and do not p lace th e ba ttery a nd metal
(e.g. cha in or key ) togethe r for sto ra ge or tra nsporta tion; o therwis e, the ba ttery may b e heated up , resul ting in
leakage , fire or e xp losio n.
Do not heat t he batt ery or thro w the bat te ry into f ire; othe rwise , the safet y valve o r protect ive circu it of the b attery
may be dama ged, re su lting i n fire or exp losio n.
Do not set th e batte ry in water o r moist en t he batt ery anode /cath ode; othe rwise , th e batte ry will be co rrode d and
heated up , resul ting in, le akage, fi re, or ex plosion .
Use speci fied ch ar ger to ch arge the eq uipme nt. Avoi d reversi ng the ba ttery ano de and cath ode; ot herwise , the
battery m ay be hea ted up, res ultin g in l eakag e, fire or ex plosi on .
Do not plac e the bat tery near f ire or expo se the ba ttery to hi gh-te mperatu re enviro nment ( 60°C; e.g . in car) ;
otherwi se, the b attery ci rcuit may b e damag ed and heat ed up, re su lting i n fire, lea kage, e ven explo sion.
The batte ry must b e used on spe cifie d eq uipme nt model; i f not, th e battery m ay be hea te d up, res ulting in l eakag e,
fire or exp losio n.
Do not drop o r vibra te the batt ery; ot he rwise , the batte ry circ uit may be da maged a nd h eated u p, result ing in a fi re,
leakage , even ex pl osion .
In case the b atter y leakage e nters eye , use cle an water to f lush th e eye and see k medical c are imm ediatel y; if not ,
blurred v ision m ay o ccur.
In case the b atter y leakage s tains clo thes or s kin, use cl ean wat er to flush i t; if not , skin may be d amaged.
Battery c apaci ty will be to o low if th e li thium b atterie s are lef t unused fo r a long ti me , which w ill damag e the
batteri es. Rem ove the bat terie s an d make su re they are f ully ch arged eve ry three mo nths.
Notes:
GONSIN re serve s the right t o change th is docu ment with out pri or notice .
To obtain mor e docum en tary ma terials , conta ct the loca l after -s ale ser vice cent er. GONS IN welcom e your
feedbac k.
Remove the power plug: t he
equipment is powered o n when
Caution: do not expose t he equipmen t
power cable is inserte d into the
to rain or humid places to a void fire
power socket irrespe ctive of a
and electric shock.
power switch or not; how ever, the equ ipment
Note: only qualified e lectrical
cannot be operated unt il the ON/OFF b utton is
engineers are allowe d to install eq uipment.
switched to “On”. The po wer cable is th e
main power source for cu tting off all u nits.
DCS -3021 Cong res s Sys tem
Precautions for Lithium Battery Use
In case of th e follo wing abno rmality d uring u se, turn off the pow er swit ch, take ou t the bat tery, an d keep the
equipme nt away f rom fire; i f not, th er e is a risk o f fire or exp losio n.
— —The b attery is l eakin g, changi ng color, de forme d, or damag ed.
— —The b attery is s mokin g or smelly.
Do not weld o r modif y the batte ry or cha ng e its for m; otherw ise, th e battery c ircui t may be dama ged, resu lting i n a
fire, lea kage, e ven explo sion.
Avoid t he batt er y short ing (anod e and cat hode) by el ectric wi re or met al and do not p lace th e ba ttery a nd metal
(e.g. cha in or key ) togethe r for sto ra ge or tra nsporta tion; o therwis e, the ba ttery may b e heated up , resul ting in
leakage , fire or e xp losio n.
Do not heat t he batt ery or thro w the bat te ry into f ire; othe rwise , the safet y valve o r protect ive circu it of the b attery
may be dama ged, re su lting i n fire or exp losio n.
Do not set th e batte ry in water o r moist en t he batt ery anode /cath ode; othe rwise , th e batte ry will be co rrode d and
heated up , resul ting in, le akage, fi re, or ex plosion .
Use speci fied ch ar ger to ch arge the eq uipme nt. Avoi d reversi ng the ba ttery ano de and cath ode; ot herwise , the
battery m ay be hea ted up, res ultin g in l eakag e, fire or ex plosi on .
Do not plac e the bat tery near f ire or expo se the ba ttery to hi gh-te mperatu re enviro nment ( 60°C; e.g . in car) ;
otherwi se, the b attery ci rcuit may b e damag ed and heat ed up, re su lting i n fire, lea kage, e ven explo sion.
The batte ry must b e used on spe cifie d eq uipme nt model; i f not, th e battery m ay be hea te d up, res ulting in l eakag e,
fire or exp losio n.
Do not drop o r vibra te the batt ery; ot he rwise , the batte ry circ uit may be da maged a nd h eated u p, result ing in a fi re,
leakage , even ex pl osion .
In case the b atter y leakage e nters eye , use cle an water to f lush th e eye and see k medical c are imm ediatel y; if not ,
blurred v ision m ay o ccur.
In case the b atter y leakage s tains clo thes or s kin, use cl ean wat er to flush i t; if not , skin may be d amaged.
Battery c apaci ty will be to o low if th e li thium b atterie s are lef t unused fo r a long ti me , which w ill damag e the
batteri es. Rem ove the bat terie s an d make su re they are f ully ch arged eve ry three mo nths.
Notes:
GONSIN re serve s the right t o change th is docu ment with out pri or notice .
To obtain mor e docum en tary ma terials , conta ct the loca l after -s ale ser vice cent er. GONS IN welcom e your
feedbac k.
This docu ment is a pplicab le to the fol lowin g product m odels:
Congres s serve r
GONSIN3 0000
Wirel ess AP
WAP -30
Pluggab le Goos eneck Mic rophone S tem
MIC-310 *￠14.5 -Y 310mm Pl uggab le M icrop hone Stem ( Black )
MIC-410 *￠14.5 -Y 410mm Pl uggab le M icrop hone Stem ( Black )
MIC-510 *￠14.5 -Y 510mm Pl uggab le M icrop hone Stem ( Black )
MIC-310 *￠14.5 -Y 310mm Pl uggab le M icrop hone Stem ( Silve r)
MIC-410 *￠14.5 -Y 41 0m m Plug gable Mic ropho ne S tem (Si lver)
MIC-510 *￠14.5 -Y 510mm Pl uggab le M icrop hone Stem ( Silve r)
Headpho ne
TC-D3 Ste reo Hea dphone
Chapter 1 Introduction
GONSIN DC S congr ess syste m boast s su perio r perform ance, a nd it is appl icable to c onfer ences of di ffe re nt
sizes. The congr ess ter minal is ea sy to ope ra te: pre ss the spea king ke y to speak an d rotate th e volum e knob in two
directi ons (“+ ” and “-”) to a djust the v olume o f the built -in lou ds peake r; system m ainte nance doe s not need mu ch
skill as we ll: tec hn ician s can opera te the te rminal af ter a sho rt period o f trainin g.
System co mposi tion:
The DCS con gress s ystem is co mposed of t he cong ress serv er, wire le ss cong ress term inals ( for the cha irman and
delegat es), wi reless AP WAP -30, HUB- D45, PC ( optiona l), confe rence m anageme nt soft ware (opt ional), h ighspeed dom e camer as ( optio nal), and a udio de vices and d isplay de vices .
The follo wing fi gure show s the syste m wirin g diagram :
05
-
+
-
+
WAP-30
Power
Amplifier
Projector
DCS-3021DW
DCS-3021CW
8P2-01
06
This docu ment is a pplicab le to the fol lowin g product m odels:
Congres s serve r
GONSIN3 0000
Wirel ess AP
WAP -30
Pluggab le Goos eneck Mic rophone S tem
MIC-310 *￠14.5 -Y 310m m Pl uggab le Microp hone St em (Black )
MIC-410 *￠14.5 -Y 410m m Pl uggab le Microp hone St em (Black )
MIC-510 *￠14.5 -Y 510m m Pl uggab le Microp hone St em (Black )
MIC-310 *￠14.5 -Y 310m m Pl uggab le Microp hone St em (Silve r)
MIC-410 *￠14.5 -Y 4 10 mm Plug ga ble Mic rophone S tem (Si lver)
MIC-510 *￠14.5 -Y 510m m Pl uggab le Microp hone St em (Silve r)
Headpho ne
TC-D3 Ste reo Hea dphone
DCS -3021 Cong res s Sys tem
Front sid e Back side :
1. Power sw itch (P OWER); 8. RS-4 85 inte rf ace ( RS-48 5 TO CAMERA) . T his
Note: The serv er tak es a peri od of tim e to st art up.
Before th e se rver is fully s tarted up , do n ot o perate
the congr ess ter minals.
2. Backli ght LCD
Sh ow va ri ou s kin ds o f infor ma tion (s uc h as
operati on mode a nd langu age) and pr ovide a
plurali ty of la nguag es to al low user s to se t the
system. 11.One -chan ne l 6P in terfa ce. Th is inter face is used
3.Opera tion bu ttons: up /down /l eft/r ight arro w butto ns
4. OK butto n
5. Bass adj ustme nt knob (BA SS)
6. Treble ad justm en t knob (T REBLE)
7. Volume kn ob (VOL ) functio n).
2.
3 Ins
tal
The congre s
brack
ets. Scre w up the bra
sc
rew up it wit h the r
07
Chapter 2 Congress Server
2.1 Overv iew
The DC S co ngress server GON SIN30 000 is the cor e of a co ngres s syst em. It can be conn ected to WAP- 30 or
WAP -30I ( for incr easin g the n umber of liste ning u nits a nd simul taneo us inter preta tion uni ts) as well a s HD ma trix,
mixer, power amp lifier, and PC over corr es pondi ng in terfa ce. The serve r acts as a brid ge to co nnect system
hardwar e a nd control so ftware. It ca n wor k i ndepend ently or be conn ected with a PC to allow op erator to use the
confere nce man ag ement s oftware f or mana gement an d contr ol .
Product m odel:
GONSIN3 0000
Congres s serve r (with dis cussion a nd auto matic cam era tra ck ing fun ctions)
2.2 GONSI N3000 0 Functio ns and Indi cator s
2.2. 1 Bas ic Func tions
1. Us e 2.4 GHz frequenc y hop ping te chnol ogy to autom atica lly detect 2.4GHz RF resource s and use relia ble
frequen cy hopp in g mecha nism to avo id co-c hannel in terfere nce if it i s combine d with so ftware.
2. Use h ig h-efficien cy dig ital aud io com pressio n algo rithm to maxim ize ut ilizati on rat e of wi re less c arriers . Mutu al
interfe rence w ill not be ca used if mul tiple s ystems ar e used in a b ui lding .
3. Suppor t 8*1/8 *8 HD autom atic ca me ra trac king func tion.
4. Suppor t AUTO a nd F IFO spe aking mod es.
5. Suppor t up to fou r speaker s at the sa me t ime (on e chairma n termi na l and thr ee delega te term inals).
6. Suppor t volum e/tune of c ongress t ermin als to be adj usted i n ba tch.
7. Suppor t congr ess termi nals to be sh ut down i n batch, wh ich hel ps e ffe ctively r educe w or kload .
-
+
-
+
OK
1 2
3
4
5
6
7
8
9
10
11
12
13
14
15
2.2. 2 Ind icato rs
Front sid e Back side :
1. Power sw itch (P OWER); 8. RS -485 in terfa ce (RS- 485 TO C AMERA). This
interfa ce has two pa irs of connec tion term inals
Note: The serv er tak es a peri od of tim e to st art up.
and i t is used for c onnecti ng t o came ra s t hat
Before th e se rver is fully s tarted up , do n ot o perate
support S ONY\P ELCO-P.
the congr ess ter minals.
9. RS -232 se rial po rt . T his i nt erfac e is used f or
2. Backli ght LCD
connect ing to a PC f or softwa re cont ro l.
Sh ow va ri ou s kin ds o f infor ma tion (s uc h as
10 .Networ k in terfa ce ; this in te rface i s us ed to
operati on mode a nd langu age) and pr ovide a
connect t o a PC or bac kup serve r.
plurali ty of la nguag es to al low user s to se t the
system. 11.One -chan ne l 6P in terfa ce. Th is inter face is used
for c onnecti ng to WA P-30I ( for i ncrea sing th e
3.Opera tion bu ttons: up /down /l eft/r ight arro w butto ns
nu mbe r of l ist en ing u ni ts an d sim ul taneo us
4. OK butto n
interpr etati on units) .
5. Bass adj ustme nt knob (BA SS)
12. One- channel 8P i nterfac e. Th is inte rf ace is used
6. Treble ad justm en t knob (T REBLE)
fo r c on nec ti ng to W AP -30 ( wit h dis cu ssi on
7. Volume kn ob (VOL ) functio n).
13. One gro up of RCA ba la nced au dio outpu t
14. One-c hanne l XL R balan ced audio o utput
15. Power i nterf ace (AC 110-220V 50 Hz)
08
2.
3 Ins
tal
lat
ion
The congre s
s ser ver is 1U
high, and t
herefor e it can be ins
talled in a
19-inch ra ck. It
has two accompa
nied
brack
ets. Scre w up the bra
cket fixe d in tw
o sides of th e co ngres
s serv
er, put the co
ngres
s serv
er int
o the rac
k, then
sc
rew up it wit h the r
ack screw s, as sho
wn in the fol lowin g figure
:
OK
DCS -3021 Cong res s Sys tem
Loading...