GoMax Electronics MX-1010, MX-1010P User Manual

MX-1010

Dual-View Video Enhancing Processor

User Manual

Made in Taiwan

Safety and Notice

The MX-1010 Dual-View Video Enhancing Processor has been tested for conformity to safety regulations
and requirements, and has been certified for international use. However, like all electronic equipments, the
MX-1010 should be used with care. Please read and follow the safety instructions to protect yourself from
possible injury and to minimize the risk of damage to the unit.

 Follow all instructions and warnings marked on this unit.
 Do not attempt to service this unit yourself, except where explained in this manual.
 Provide proper ventilation and air circulation and do not use near water.
 Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
 Use only the power adapter and power cords and connection cables designed for this unit.
 Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

Chapter 1

Introduction

1

General

1

Features

2

Specifications

3

Package Contents

4

Inputs and Outputs

5

Chapter 2

Hardware Installation

6

Safety Precautions

6

Installation Procedure

6

Chapter 3

IR Remote Control

8

On Screen Display Menu

10

Chapter 4

Software Operation

11

System Requirement and Precautions

11

Instruction of Software Connection

11

Chapter 5

Troubleshooting

13

Warranty

14

Appendix

Supported Resolution

15

Table of Contents

~ 1 ~

Overview

The MX-1010 Dual-View Video Enhancing Processor is an advanced video processor to enhance the video
quality for multimedia presentations. It is an ideal solution for applications where two video signals must be
displayed on a single display. It supports up to nine video inputs, of which two, one digital and one analog, can be
outputted simultaneously in Picture-In-Picture (PIP) or Picture-Aside-Picture (PAP) modes. The MX-1010
combines state-of-the-art technologies, such as video de-interlacer, scaler, color management, format conversion,
and video switch into one box and allows you to manipulate output images, wherever position and whatever sizes
you want for viewing two computers or two video signals or a combination through the control software*.

The embedded scaler converts signals from input sources to match the native resolution of monitors, flat
panel displays, projectors as well as user-selectable output settings up to WUXGA (1920 x 1200). Dual outputs
are provided in both analog (VGA) and digital (DVI) format, one is connected to remote display and the other is
connected to on-site display for real time monitoring.

Software will be available soon.

Figure 1: Configuration Diagram

Introduction

~ 2 ~

Features

 Two graphics (DVI / VGA) and six video (two S-Video / two component / two composite) Inputs, from

640x480 to 1920x1200, interlaced or progressive.

 Dual outputs (DVI / VGA), 640x480 to 1920x1200 with default resolution 1280x1024.
 Support audio inputs from either stereo RCA or PC ear phone.
 Dual stereo audio outputs
 PIP, PAP, Full screen modes and adjustable size & position through software.
 Dynamic scaling to provide better visual experience
 Titles, borders and colored backgrounds.
 Resize, position, flip, zoom& pan and blend output video.
 Can be cascaded to obtain more images.
 Image parameters and layouts are automatically saved in flash memory and can be recalled for later use.
 Video parameters adjustable (brightness, contrast, color temperature, etc.).
 User-selectable output settings, up to 1920x1200.
 Also perfectly as a video screen splitter, a video converter and a video switcher.
 Firmware upgradable for support of new features and technology enhancements.
 IR control and software control through RS-232.
 Automatically power-saving mode.

~ 3 ~

Specifications

Model Name

MX-1010

MX-1010P

Technical

Role of usage

Multiplexer / video processor

Dual output support

Yes

HDCP compliance

Yes

Video bandwidth

DVI [Single-link 4.95Gbps] VGA [165MHz]

Component [30MHz] Composite [13.5MHz]

TV tuner support

No

NTSC or PAL & SECAM [upon request]

Video support

480i / 480p / 720p / 1080i / 1080p60 / 1920x1200@75 / 1600x1200@60

Audio support

Yes

Control

IR

PIP / PAP

Yes

Cascadable

Yes

Input TMDS signal

1.2 Volts [peak-to-peak]

ESD protection

Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]

PCB stack-up

6-layer board [impedance control — differential 100; single 50]

Input

1x VGA + 1x DVI + 2x component +
2x composite + 2x S-video + 1x RS-232

1x VGA + 1x DVI + 2x component +
2x composite + 2x S-video +
1x RF + 1x RS-232

Output

1x DVI + 1x VGA

IR remote control

Electro-optical characteristics:  = 25 / Carrier frequency: 38kHz

DVI connector

DVI-I [29-pin female, digital only]

VGA connector

HD-15 [15-pin D-sub female]

RS-232 connector

DE-9 [9-pin D-sub female]

RCA connector

75 female

RF connector [MX-1010P]

F connector [75 female for RG-6/U cable]

Mechanical

Housing

Metal case

Dimensions
[L x W x H]

Model

440 x 145 x 44mm [1―5‖ x 5.7‖ x 1.7‖]

Package

230 x 545 x 110mm [9―1‖ x 1―10‖ x 4.3‖]

Carton

580 x 570 x 260mm [1―11‖ x 1―11‖ x 10.2‖]

Weight
Model

1.8kg [4.0 lbs]

Package

3.2kg [7.0 lbs]

Fixedness

1U rack-mount with ears

Power supply

5V 4A DC

Power consumption

12 Watts [max]

Operation temperature

0~40C [32~104F]

Storage temperature

-20~60C [-4~140F]

Relative humidity

20~90% RH [no condensation]

Package Contents

1x MX-1010 or MX-1010P
1x DVI to DVI&VGA breakout cable
1x DVI to HDMI cable
1x DVI to VGA adapter
1x RS-232 to USB adapter

1x IR remote controller
1x 5V 4A power adapter
2x 1U rack mounting-ear
1x User Manual