GoMax Electronics CV-57VE2-100 User Manual
HDMI Extender over Single Cat.X
with HDBaseT, RS232, Bi-dir ectional IR,
Ethernet & POC
User Manual
rev: 141110
Made in Taiwan
C
C
V
V--
5
5
7
7
V
V
E
E
2
2--
1
1
0
0
0
0
Safety and Notice
The CV-57VE2-100 has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic
equipments, the CV-57VE2-100 should be used w i th care. P leas e re ad and follow the s afety
instructions to pr ot ect yourself from possi ble injury and to mini mize the risk of dam ag e to the
unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is
on a stable surface.
● Use only the power adapter and power cords and connection cables designed for this
unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
INTRODUCTION
The
CV-57VE2-100
boosts up your video/audio transmission distance up to 100m (330ft) in HDTV
1080p with 48-bit color depth. CV-57VE2-100 also supports the most advanced 3D video format
complaint with HDMI specification and therefore guarantees the highest 3D video compatibility on the
market. With only one cost effective Cat.5/5e/6 cable, users can readily extend HDTV sources from DVD
players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to distant
display monitors including HDMI or DVI enabled TV sets or LCD PC monitors. With the advanced design
for the latest HDMI technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP supports
and compatibility are all further insured. This flexibility makes HDCP compliant DVD players or PS3
transmit utmost high quality video and audio with a greater distance at the minimal cost, when integrating
several components apart. In addition, CV-57VE2-100 is also equipped with bi-directional IR
pass-through path and RS-232 serial port control. These bonus features allow users to boost IR control
distance up to 100m (330ft) and mak e IR control possible through only single Cat.5/5e/6 cable including
HDMI signals. In addition, serial port offers the convenient path for interactive application, such as touch
panels. In addition, CV-57VE2-100 also supports POC (Power over Cable) which can power both units
from TX or RX with power supply.
The CV-57VE2-100 includes two units: transmitting unit CV-57VE2-100-TX and receiving unit
CV-57VE2-100-RX. The transmitting unit is used to capture the input HDMI / DVI signals with IR control
packets. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing
IR and serial control signals. CV-57VE2-100 offers the most convenient solution for digital signage with
long distance A/V transmission path, and with 10G transmission bandwidth ready, CV-57VE2-100 is
ready for your next HDMI generation and applications!
FEATURES
● Supports HDMI Deep Color, full 3D & 4K2K@30 (HDBaseT technology)
● Extends the transmission up t o 100m (330ft) from the HDMI source at Full HD 1080p 48-bit and 80m
(264ft) at 4K2K@30
● Supports POC(Power over Cable) which can power both units from TX or RX with power supply.
● HDCP & EDID Bypass
● CEC support
● Auto equalization
● Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
● DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
● Supports full frequency IR signal from 20KHz to 60KHz
● Bi-directional IR path-through
● Full Duplex RS-232 control up to 115,200 bps through connector
● Integrated port for LAN/ network device
● Wall mounting housing design for easy and robust installation
PACKAGE CONTENTS
● 1x CV-57VE2-100 [TX & RX]
● 1x IR blaster
● 1x IR receiver
● 1x DC 24V
● 1x User Manual
1
SPECIFICATIONS
Model Name
CV-57VE2-100
Technical CV-57VE2-100[Tx]
CV-57VE2-100[Rx]
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI Deep Color, full 3D & 4K2K@30/40m
HDCP compliance
Yes
Video bandwidth
Single-link 340MHz [10.2Gbps]
Video support
480i / 480p / 720p / 1080i / 1080p60
HDMI over UTP
1080p@60 100m (330ft) [CAT5e]
Audio support
Surround sound [up to 7.1ch] or stereo digital audio
Equalization
Auto
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, T TL]
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact
discharge]
[2] Core chipset — ±8kV
PCB stack-up
6-layer board [impedance control — differential 100Ω; single 50Ω]
IR pass-thru
Bi-directional
RS-232 support
Yes
POC support
Yes
Input
1x HDMI
1x 3.5mm
1x RJ-45(Video)
1x 3.5mm
Output
1x RJ-45(Video)
1x 3.5mm
1x HDMI
1x 3.5mm
In / Out
1x RS-232
2x RJ-45(Ethernet)
1x RS-232
2x RJ-45(Ethernet)
HDMI source control
Controllable via IR pass-through from RX to TX with IR extenders
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C(Reverse Mode)
Rotary control switch
None
3.5mm connector
IR receiver / IR blaster
IR receiver / IR blaster
Mechanical CV-57VE2-100[Tx]
CV-57VE2-100[Rx]
Housing
Metal enclosure
Dimensions
[L x W x H ]
Model
99.9 x 89.3 x 26mm [3.9" x 3.5" x 1"]
Package
325 x 196 x 92mm[12.7" x 7.7" x 3.6"]
Carton
490 x 426 x 352mm[1'6" x 1'4" x 1'2"]
Weight
Model
320g [11 oz]
Package
720g [1.6 lbs]
Fixedness
Wall-mounting case with screws
Power supply
24V1A
Power consumption
Max 12W
Operation temperature
0-50°C
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
2
PANEL DESCRIPTIONS
Transmitting unit ► CV-57VE2-100-TX
Front Panel
1. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit RX.
2. LED: TX /RX link indicator
3. Ethernet port for LAN: Connect to network device
4. DIP Switch: PIN#1: Setup the RS-232 mode for serial communication channel.
PIN#2: For Firmware Update
5. RS-232: Connect to serial port device with a DSUB-9 male-male or male-female cable here
F/W update for Valens.
Rear Panel
6. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
7. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
8. HDMI IN: Connects to a HDMI source with a HDMI male-male cable
9. Mini-USB: F/W update
10. LED: Power indicator
11. +24V DC: Connect to a 24V DC power supply.
3
Receiving unit ► CV-57VE2-100-RX
Front Panel
12. RJ45: Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit TX.
13. LED: TX/RX link indicator
14. Ethernet port for LAN: Connect to network device
15. DIP Switch: PIN#1: Setup the RS -232 mode for serial communication channel.
PIN#2: For Firmware Update
16. RS-232: Connect to serial port device with a DSUB-9 male-male or male-female cable here
F/W update for Valens.
Rear Panel
17. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
18. IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
19. HDMI OUT: Connects to a HDMI display with a HDMI male-male cable
20. LED: Power indicator
21. +24V DC: Connect to a 24V DC power supply.
* DIP Switch Position
DIP Switch Position
Description
TX & RX
PIN#1
ON []
TxD: The 2nd pin of RS-232, which is in charge of sending data
RxD: The 3rd pin of RS-232, which is in charge of receiving data
OFF []
TxD: The 3rd pin of RS-232, which is in charge of sending data
RxD: The 2nd pin of RS-232, which is in charge of receiving data
PIN#2
ON []
Firmware Update
OFF []
Normal
4
Loading...