CV-300A
HD/SD-SDI to Component Converter
with Audio
User Manual
Made in Taiwan
~ 1 ~
Safety and Notice
The CV-300A HD/SD-SDI to Component Converter with Audio has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic equipments,
CV-300 should be used with care. Please read and follow the safety instructions to protect yourself form possible
injury and to minimize the risk of damage to the unit.
z Follow all instructions and warnings marked on this unit.
z Do not attempt to service this unit yourself, except where explained in this manual.
z Provide proper ventilation and air circulation and do not use near water.
z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
z Use only the power adapter and power cords and connection cables designed for this unit.
z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
~ 2 ~
The CV-300A HD/SD-SDI to Component Converter with Audio Support provides high quality 12 bit
conversion between SDI digital video input and component analog video output. Plus, with two extra retimed SDI
loop outs, CV-300A can also be treated as an advanced SDI splitter. The CV-300A supports both SD-SDI and
HD-SDI formats including SMPTE 259M, SMPTE 292M, and SMPTE 296M. Built-in 24 bit audio conversion up to
114dB 8 Channel DAC audio conversion offers a complete video and audio between SDI and analog video
component and balanced and unbalanced audio outputs at the same time!
Features
z Excellent quality 12-bit D/A video conversion
z 8 channel high quality 24-bit D/A audio conversion
z Supported high-definition (HD) formats: 1080i @50/59.94/60Hz, 1035i @50/59.94/60Hz, 720p
@50/59.94/60Hz
z Supported standard-definition (SD) formats: NTSC @59.94Hz, PAL @50Hz
z Auto HD/SD-SDI detection
z Two equalized and retimed loop outputs
z 8 channel unbalanced audio output through RCA connectors
z 8 channel balanced audio output through XLR connectors
z Easy installation
z External DIP Switch Configuration
I
ntroduction
~ 3 ~
Specifications & Package Contents
Model Name CV-300 CV-300M CV-300
A
Technical
SDI standards SD-SDI & HD-SDI
Auto HD/SD-SDI Detection
Y
es
Video bandwidth [1.485Gpbs & 1.485/1.001Gbps]
Video support
[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30
[SD] NTSC@59.94Hz, PAL@50Hz
Audio Support N/A
N
/A Up to 8 Channels
Input signal [SD-SDI] SMPTE 259M [HD-SDI] SMPTE 292M, 296M
Output signal
HDMI (video only) /
Component video
Component video
Component video
Balanced/Unbalanced Audio
Output impedance
75Ω
Video DAC conversion 12 bits
Audio DAC converision 24 bits
Synchronization mode
Internal or external
synchronization
Internal synchronization Internal synchronization
Cable equalization
[HD-SDI]
u
p to 150m (500ft)
[SD-SDI] up to 300m (1000ft)
Loop-out 2 equalized SDI loop-outs
2 equalized and
re-clocked SDI loop-outs
2 equalized and re-clocked
SDI loop-outs
PCB stack-up 6-layer board [impedance control — differential 100Ω; single 50Ω]
Input 1x BNC [SDI]
Output
1x HDMI/DVI
1x Component
2x BNC [SDI]
1x Component
2x BNC [SDI]
8x RCA/XLR
1x Component
2x BNC [SDI]
BNC connector
75Ω inter-locked socket
D-sub connector 24-pin D-sub female
HDMI connector
T
ype A [19-pin female]
VGA connector HD-15 [15-pin D-sub female]
DIP switch
8-pin [output format /
color space / gain control
/ pedestal]
None
4-pin [Audio Mute / Audio
Group / Reserved / Reserved]
Mechanical
Housing Metal enclosure
Dimensions
(L x W x H)
Model
160 x 110 x 25mm
[6.3”x4.3”x1”]
108x 113x 40mm
[4.3”x4.4”x1.6”]
185 x 115 x 40mm
[7.3”x4.5”x1.6”]
Package
270 x 175 x 80mm
[10.6”x6.9”x3.2”]
268x 175x 78mm
[10.5”x6.9”x3.1”]
330 x 200 x 93mm
[1’1”x7.9”x3.7”]
Carton
450 x 370 x 300mm
[1’5.7”x1’2.6”x11.8”]
430 x 358 x 291m
[1’6”x1’2”x11.5”]
490 x 430 x 350mm
[1’7”x1’5”x1’2”]
Weight
Model 418g [0.9 lbs] 305g [10.7 oz] 485g [1.1 lbs]
Package 1031g [2.3 lbs] 785g [1.7 lbs] 1450g [3.2 lbs]
Fixedness
I
nter-locked power supply
~ 4 ~
Power supply 5V 4A DC
Power consumption 10 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
Package Contents
1x CV-300
1x 5V power adapter
1x VGA-to-component
breakout cable
1x HDMI-to-DVI adapter
1x User Manual
1x CV-300M
1x 5V power adapter
1x User Manual
1x CV-300A
1x XLR Adaptor
1x 5V power adapter
1x User Manual
~ 5 ~
Front Panel
1. 8 CH unbalanced audio outputs 4. HD/SD-SDI output #2
2. 5V power 5. HD/SD-SDI input
3. HD/SD-SDI output #1
Rear Panel
6. Component Output Pr 9. Signal Detection LED
7. Component output Pb 10. XLR output thru DSUB-24
8. Component output Y
Panel Descriptions
67
1 2 3 4
8 9
5
10
~ 6 ~
Bottom Panel
A 4-pin DIP switch is used for user interface, and users can access this switch from the bottom of the unit.
The following table demonstrates the functionality that users can change through different pin combinations.
Pin ON (©): Pin OFF (ª):
Pin #
1 2 3 4
ON (©) Audio ON Group 1&2
R
eserved Reserved
OFF (ª) Audio Mute Group 3&4
R
eserved Reserved
HD INPUT
720p @ 50Hz SMPTE 296M -3
720p @ 60 / 59.94Hz SMPTE 296M -1, -2
1080i @ 25Hz SMPTE 274M -6
1080i @ 30 / 29.97Hz SMPTE 274M -4, -5
1080p @ 24 / 23.98Hz SMPTE 274M -10, -11
1080p @ 25Hz SMPTE 274M -9
1080p @ 30 / 29.97Hz SMPTE 274M -7, -8
SD INPUT
NTSC
PAL B,D,G,H,I
Pin Function
1 Ground
2 Positive Polarity Terminal
3
R
eturn Terminal
Supported Resolutions
NO NO
XLR3 Pin Definition
~ 7 ~
The SELLER warrants the CV-300A HD/SD-SDI to Component Converter with Audio to be free from defects
in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer.
Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option,
repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any
unauthorized modifications including static discharge and power surges.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and
labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the
BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in
transit. Under no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other
implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for
shipping charges to and from the SELLER. Cables are limited to a 30 day warranty and cable must be free from
any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER
assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be
liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in
this manual, even if advised of the possibility of such damages. Also, the technical information contained herein
regarding the CV-300A features and specifications is subject to change without further notice.
L
imited Warranty
Loading...