Golo Chang MIDUEMBASE User Manual

User manual
1. Purpose
Golo’s CFL has implemented three phosphors together into one compact fluorescent. It is a new type of light resource of green environment. The product’s applications are practical for supermarkets, shopping centers, retail stores, and gymnasium.
2. Characteristics
3. Directions
1) For Safety purposes, the lamp fixture must be powered off before being
installed, changed or being cleaned
2) This self ballast lam p cannot be ope rated w it h dimmer device. In order to keep
the lamp’s high performance it should be used in defined voltage.
3) This Lamp can be performed under environmental areas in temperature from
-18° C to 45° C, it cannot be used in enclosed fixture or wet areas.
4) Please check the power, voltage and contacts of the lamp incase the lamp
performs abnormal signs such as the light blinking or the light turns off suddenly
5) Do not hold the tube by the hands while changing or cleaning the lamp. The
proper way is to hold the lamp by the plastic housing.
4 Warnning
This device complies with Part 18 of the FCC Rules. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This product may cause interference to radio equipment and should not be
installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45–30 MHz. If this occurs, please change outlet or move the lamp far away from other appliance.
Use only on 120V/60Hz Never disassemble or modify-any changes could void the user’ authority to operate this device. Risk of electric shock-do not use with where directly exposed to water. This device is not intended for use with emergency exit fixtures or emergency exit lights. Not for use with dimmers, or photocell devices or occupancy sensor.
Golo Chang Company Limited 4F, No.50-3, San Min Rd., LuChouCity, TaiBei Hsien, Taiwan, R.O.C.
Loading...