M201 & M200
User Manual
Simple and powerfull!
BY GOLMAR
Revision June/2012
FW revision 4.27
SISTEMAS DE COMUNICACIÓN, S.A.
C/Silici 13. Poligon Industrial Famadas
08940 – Cornellà del llobregat – Spain
www.IPvideoIntercom.com
Telf: 0034-934800696
Mail: golmar@golmar.es
USER MANUAL | M201 & M200 |
5
SISTEMAS DE COMUNICACIÓN, S.A.
User Manual – Rev FW 4.27 M201 & M200
CONTENT
1 GENERAL DESCRIPTION
1.1 Monitor screens Status
2 MENU ICONS DESCRIPTION AND FUNCTIONALITIES
2.1 Panel tracking
2.2 Concierge call and Panic call
2.3 Intercom call
2.4 Missed calls / Picture recording
2.5 Text Messages
3 COMMUNICATION STATUS DESCRIPTION
3.1 Incoming call from a video entry panel
3.2 Incoming call from an apartment
3.3 Incoming call from a concierge station M201/C
3.4 Communication
4 CAUTIONS AND MAINTENANCE
SISTEMAS DE COMUNICACIÓN, S.A.
USER MANUAL | M201 & M200 |
7
SISTEMAS DE COMUNICACIÓN, S.A.
User Manual – Rev FW 4.27 M201 & M200
|
M201 & M200 | USER MANUAL
6
M201 & M200 User Manual – Rev FW 4.27
1.- GENERAL DESCRIPTION
M200 series monitors are technologically advanced monitors which are using the latest IP
technology. That makes M200 series monitors from Golmar a reliable and advanced product.
The monitors M201 & M200 have 6 buttons which functions are described through an icon
which appears besides the button on the screen by simply clicking at any of the buttons.
M201 monitor comes with a handset which loudspeaker is adapted for people facing
hearing problems with hearing aids.
1.1 Monitor screens Status
It can be differentiated three basic status of the monitor screen:
a.- Stand by: The monitor is off, the screen is black.
b.- Main Menu, The screen is ON and displays icons. The number and type of icons
depend on different situations which are described along point 2.
c.- Notication: The monitor blinks a big icon in the middle of the screen notifying
about incoming Text message or incoming picture from a missed call ( described on
points 2.4 and 2.5).
d.- Communication status (described on point 3).
2.- MENU ICONS DESCRIPTION AND FUNCTIONALITIES
1.1 Panel tracking
By pressing the button besides this icon it will be activated the camera from
the panel that is able to call your apartment.
When tracking from a camera is activated, the screen will show the following information:
Panel label from the panel that is being activated.
Arrows right and/or left in case there is more than one panel, being possible to move
through them activating one by one.
Icon to activate the audio communication with the selected panel camera.
Once the communication channel is established the screen shown is the following:
panel label 7
panel label 7
Activate audio communication channel
Activate Lock
Activate Lock
Move to next panel
Move to previous panel
Mute the microphone from the monitor
during the communication.
Panel Label
Missed calls and picture recordingPanel Tracking
Text MessagesConcierge Call
Intercom Call
Panel Label
Cross
Cross
2.- MENU ICONS DESCRIPTION AND FUNCTIONALITIES
2.2 Concierge call and Panic call
By pressing the button besides this icon it will appear a menu on screen
showing the available concierges to be called. If your apartment block doesn’t
has any concierge this icon will not be displayed on the main menu.
How to call a concierge: Scroll and navigate among the available concierges
with arrow up and down buttons till the desired concierge is highlighted, then
press call button or hang up the handset. To nish the communication hang
off the handset.
How to go back to main menu: Click on the cross to end this menu an go back
to main menu.
USER MANUAL | M201 & M200 |
9
SISTEMAS DE COMUNICACIÓN, S.A.
User Manual – Rev FW 4.27 M201 & M200
|
M201 & M200 | USER MANUAL
8
M201 & M200 User Manual – Rev FW 4.27
2.- MENU ICONS DESCRIPTION AND FUNCTIONALITIES
2.3 Intercom call
By pressing the button besides this icon it will appear a menu on screen
showing the available monitors to intercom with. Those monitors from your own
apartment will appear at the top of the list and will be marked with a star.
How to call a monitor: Scroll and navigate among the available monitors with
arrow up and down buttons till the desired monitor is highlighted, then press
call button.
If the apartment monitor is ringing, the apartment label will blink in green.
In case the apartment is busy, the apartment label will turn into yellow.
In case the monitor can not be reached, the apartment label will turn red.
To nish the communication, click on the cross button.
How to go back to main menu:
Click on the cross to end this menu an go back to main menu.
Arrow up
Arrow up
Arrow down
Arrow down
Cross
Cross
Call
Call
conciergie 1
conciergie 2
mR. jAMES
mR. sMITH
It is possible to send a Panic/emergency call to a concierge. It is
necessary from the “Stand by” screen (black) to hold press any of
the 6 buttons for 3 seconds.
A Panic call will be generated and sent to the concierge stations.
2.- MENU ICONS DESCRIPTION AND FUNCTIONALITIES
2.4 Missed calls and picture recording
By pressing the button besides this icon, it will appear a sequence of images
stored in the monitor. Unless there is any image stored, this icon will not
appear on the main menu screen.
Each image corresponds to a Missed call being generated when an incoming
call has not been answered from the monitor.
There are two methods to know that there are pictures from missing calls
unchecked:
– The monitor automatically every 5 minutes displays a large icon blinking in
the middle of the screen. Once the images are checked the monitor will not
blink until new images are stored.
– On the main menu, the icon of the pictures will display a number in red ,
notifying the number of images that have been unchecked. Once checked this
number will disappear.
To Delete all images it must be pressed and hold during 3 seconds the Basket bin icon.
Press the Cross button to go back to main menu.
2.- MENU ICONS DESCRIPTION AND FUNCTIONALITIES
2.5 Text Messages
By pressing the button besides this icon it will appear a sequence of Text
Messages stored in the monitor. Unless there is any image stored, this icon
will not appear on the main menu screen.
Text Messages are sent by the concierge or building administrator locally or remotely.
There are two methods to know that there are text messages unchecked:
– The monitor automatically every 5 minutes displays a large icon blinking
in the middle of the screen notifying that the are some stored Text messages
pending to be checked. Once the messages are checked the monitor will not
blink until new messages are received.
– On the main menu, the icon of the Text messages will display a number
in red , notifying the number of messages that have been unchecked. Once
checked this number will disappear.
Once on the Message screen, it is displayed the information about the Date&Time
when this message was sent. It is possible to move through all stored messages with the
navigation arrows left and right.
Text message priorities are set by a colour code being:
Green: Normal Priority / Yellow: Medium Priority / Red: High Priority
It is not possible to delete any text message. Only the administrator of the building.
Press the Cross button to go back to main menu.
USER MANUAL | M201 & M200 |
11
SISTEMAS DE COMUNICACIÓN, S.A.
User Manual – Rev FW 4.27 M201 & M200
|
M201 & M200 | USER MANUAL
10
M201 & M200 User Manual – Rev FW 4.27
5
5
1
Panel Label
09:00 01/12
panel label 7
Arrow right
Arrow left
In case it exist text messages
and pictures unchecked, both
icons will blink on screen.
Basket bin
Time Stamp
Cross
3.- COMMUNICATION STATUS DESCRIPTION
3.1 Incoming call from a video entry panel
When a call is generated to the apartment, the monitor starts to ring. It rings 6
times while the video image will appear on screen. It is shown as well the panel
label from which the call is coming in order to identify the entry panel of the call.
At this point it is possible to:
Start the Audio communication: by pressing the Answer button or by hanging
up the handset (M201 model only).
Activate the lock: without starting the communication. Depending on the
conguration of the monitor two locks can be activated. Lock no.1 is activated
with a short press. If the monitor has been programmed accordingly a
secondary lock can be activated by pressing this button during three seconds.
Cancel the call: By pressing the cross the incoming call will be ended
independently if Audio communication started or not. It is possible to nish
the Audio communication once started by simply hanging off the handset
(M201 model only).
Mute the Ring tone: The monitor Stops ringing but the incoming call still is on hold.
3.- COMMUNICATION STATUS DESCRIPTION
3.2 Incoming call from an apartment
When a call is generated to the apartment, the monitor starts to ring. It is shown
as well the apartment label from which the call is coming in order to identify the
calling apartament.
At this point it is possible to:
Start the Audio communication: by pressing the Answer button or by hanging
up the handset (M201 model only).
Cancel the call: By pressing the cross the incoming call will be ended
independently if Audio communication started or not. It is possible to nish
the Audio communication once started by simply hanging off the handset
(M201 model only)
Mute the Ring tone: The monitor Stops ringing but the incoming call still is
on hold.
3.3 Incoming call from a concierge station M201/C
The operation is exactly the same as described for Incoming calls from an
apartment in the previous point.
USER MANUAL | M201 & M200 |
13
SISTEMAS DE COMUNICACIÓN, S.A.
User Manual – Rev FW 4.27 M201 & M200
|
M201 & M200 | USER MANUAL
12
M201 & M200 User Manual – Rev FW 4.27
panel label 1
Ms robinson
Answer
Answer
Activate lock
Mute ring tone
Mute ring tone
Panel label
Apartament label
Cross
Cross
1-1
3.- COMMUNICATION STATUS DESCRIPTION
3.4 Communication
Once the communication is started it is possible to:
Activate the lock: without starting the communication. Depending on the
conguration of the monitor two locks can be activated. Lock no.1 is activated
with a short press. If the monitor has been programmed accordingly a
secondary lock can be activated by pressing this button during three seconds.
Finish the call: By pressing the cross. Call will be ended. It is possible to
nish the Audio communication once started by simply hanging off the
handset (M201 model only).
4.- SPECIFICATIONS, CAUTIONS AND MAINTENANCE
A - Specications
B - Cautions
This product is an electronic video monitor.
Do not through liquids over the unit. Any liquid coming into the product may cause
failure or re.
Do not expose the unit at a high temperatures, corrosive environments or high
humidity grade.
Do not hang neither place any other product on it. The bracket might brake as is
designed tu support its own weight. Puling, pushing or climbing on it may cause the
monitor to fall.
This is a professional product. We strongly recommend follow the installation
specications and leave the installation to a Golmar certied installer.
C - Maintenance
The product is manufactured in high quality plastics. For cleaning do not use chemical
products or abrasives or cleaning agents. Clean the product with a soft cloth dampened
with a small amount of water.
Buttons are mechanically linked to the PCB. Do not press with much strength. A soft
press would be enough to operate it.
USER MANUAL | M201 & M200 |
15
SISTEMAS DE COMUNICACIÓN, S.A.
User Manual – Rev FW 4.27 M201 & M200
|
M201 & M200 | USER MANUAL
14
M201 & M200 User Manual – Rev FW 4.27
panel label 1
Panel label
Lock
Cross
Characteristics Values
standard
Power consumption idle: 2W, fully ac
Voltage 48V DC IEEE800.3AF
Screen 3,5 inch. 640 x 480 pixels
Temperature range
Humidity:
-20° to 70°
10% ~ 90% non-condensing
Dimensions and weight
M200: 174 (AN) x 150 (AL) x 17 (P) mm 540 gr. (packed)
M201: 218 (AN) x 150 (AL) x 17 (P) mm 670 gr. (packed)
Construction ASA plastics
|
M201 & M200 | USER MANUAL
16
NOTES
Other warnings:
The actual design and specication of the product might change with no prior notication.
The actual appearance of the product may differ from the images used in this manual.
Loading...