Gold Vision GV-4240NAS Instruction Manual

48586210E10J-R0

PLASMA DISPLAY

USER’S MANUAL

GV-4240NAS

Proper use guarantees

product life.

Before using the product, be advised that you read this owner’s manual well and try to operate it.

This Owner’s Manual presents safety precautions and how to use the product. After reading it thoroughly, use the product safely. Keep this manual where the user can see it easily.

Failure to comply with warnings and cautions for the safe use of electric appliances may cause ﬁre or human injury.

• 42” VGA wide Plasma Panel

• Built in 2-Analog Tuners

This PDP has 2-analog tuners inside for watching terrestrial broadcasting without the need to purchase a separate broadcasting receiver.

• DVD Direct Connection / Outstanding Picture Quality via a Digital Broadcast Receiver

A DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images by connecting a digital broadcasting receiver with which digital broadcasts can be viewed.

•A

PC Direct Connection

A PC can be connected to the PDP without a separate device and can be used as a monitor making it ideal for presentation, various events and exhibitions.

•

160oWide-Angle Viewing Area

•

Flat Panel with No Distortion and Colour Blurring

Since Plasma TV has no problems such as distortion, blurring, ﬂickering unlike existing CRT type displays you can enjoy Home Cinema picture quality and sound.

•

Various Video Control

- 17 Languages OSD - 20 Step screen zooming function - Full-screen still function

- Various aspect ratio (16:9, 4:3, Auto, Enlarge LB, Enlarge LBS, Panorama)

•

Free Volt (100-240V~, 50/60Hz)

•

DVI (Digital Visual Interface) Connection

Using the DVI Input, you can receive directly a digital signal from the computer. Consequently, pictures on the screen are much more clear and fresh.

•

CCF(Capsulated Colour Filter) Technology for Natural Colour

CCF technology makes the picture clearer by controlling the brightness using three different colour ﬁlters.

•

MGDI (Meta Genuine Digital Image) Engine

MGDI is the image enhancement technology designed by Electronics, which provides more clear, realistic, and delicate images.

•

BBE (Bass Booster Effect)

BBE improves the clarity of sound and the speech intelligibility making it close to the original sound, compensating the distorted sound, which is coming from the speakers own characteristics.

Features

Always obey all

safety messages.

•All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet.

•Do not disassemble or replace any parts of the TV. Refer to a qualiﬁed service personnel for repair.

Safety Precautions

4

W ARNING

You can be Killed or seriously injured if you do not follow these instructions.

During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet.

It can result in ﬁre.

When unplugging your TV, always grip the plug ﬁrmly and pull straight out from the socket.

It can result in ﬁre or electric shock due to damaged power cord.

This product must be properly grounded.

• Improper grounding may cause malfunction or electric shock.

• When proper grounding is not possible, install circuit breaker.

• Do not ground to gas pipe, water pipe, lightning rod, or telephone line.

During a lightning storm, unplug the TV from the wall outlet, and do not touch the antenna.

It can cause ﬁre or electric shock.

Power

Installation

Do not use this product in the neighborhood of a bath or shower.

It can result in electric shock or ﬁre.

Do not place this TV on an unstable cart, stand, or table

It may cause the product and cart to overturn, damaging equipment or causing possible injury.

5

During Use

Do not open the cover (or back) because high voltage is present within the TV enclosure.

It may cause electric shock.

Never push any kind of objects into this product through openings at the back of TV.

It may cause ﬁre or electric shock.

The apparatus shall not be exposed to dripping or splashing and that no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

Spilled liquids may cause electric shock or ﬁre.

Do not allow children to play or hang on the TV.

These actions may tip it over, causing personal injury.

Do not place a candle or lighted cigarette on the TV.

If these fall into the inside of the tv, it may cause a ﬁre or explosion.

Do not disassemble batteries, and do not leave around in case children swallow them.

Heavy metal may contaminate environment, and can be harmful or detrimental to human health. (If children swallow the batteries, go to hospital and consult with a doctor.) Batteries could explode if ﬁtted incorrectly. Align the batteries according to the (+) and (-) indication inside the case.

Do not spray water onto the TV or wipe with damp cloth.

It may cause an electric shock or ﬁre.

Unplug the TV from the wall outlet when smoke or a strange smell occurs, then refer to a service personnel.

Leaving the TV on in this condition, may cause ﬁre or electric shock.

Always obey all

safety messages.

• All the safety and operating instructions should be read before the product is operated.

Safety Precautions

6

Power

Installation

CAUTION

You can be injured, or this product or any other of your property can be damaged if you don’t follow instructions.

When moving your TV, remove the power plug, antenna, and cables, and be sure to move it by using two people..

Failure to follow this instruction can result in electric shock or personal injury.

Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.

It can result in a risk of electric shock.

Do not install the product where it will be exposed to the direct sunlight, and the product should not be near heat sources such as radiators, stoves, etc.

It may cause malfunction.

Do not install the product where there is oil, smog, moist, or dust

It may cause malfunction.

For proper ventilation, separate the product from the wall, and keep a distance of more than 10cm (4inches).

Due to the increase of temperature inside the TV, it may cause ﬁre.

Minimum distances around the apparatus for sufﬁcient ventilation.

Due to the increase of temperature inside the TV, it may cause a ﬁre.

If you wish to install this product on the wall or ceiling, refer to a professional.

Failure to do so may cause damage to product and injury to human.

When using an outside antenna system, do not install it in the vicinity of overhead power lines.

If the antenna touches such power lines, it may cause electric shock.

77

During Use

Do not wipe the TV using a cloth damped with chemicals (benzene, thinners, etc.).

The TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.)

Do not place any object or cover on the TV.

In an event of improper ventilation, the TV will be overheated causing ﬁre.

Do not place heavy objects or heat sources on the power cord.

It may damage the power cord, causing ﬁre or electric shock.

When watching the TV, the distance between the TV screen and your eye should be 5~7 times the diagonal size of the TV.

Watching the TV for a long time may hurt your eye sight.

When cleaning of the inside of the TV is required, consult A qualiﬁed service personnel.

When the TV is not cleaned for a long period of time, dust in it may cause ﬁre or malfunction.

When the TV is placed on a cart or table, the front side of the TV should not project outward.

Unbalance may cause the TV to drop, resulting in personal injury or equipment malfunction and damage.

Do not grip speakers when moving the TV attached with speakers.

When moving the TV while gripping speakers, the speakers may fall from the TV due to its weight, causing personal injury.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent ghost image to remain on the Plasma Display.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

The warranty does not cover any damage caused by image retention.

The plasma display panel consists of ﬁne cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit.

8

Remote Control

1 UNIT

Note

Check to be sure that the following items are packed with your Plasma panel.

Checking Accessories

Supplied Accessories

AC Cable 1 UNIT

Ferrite Core

3UNITS

VCR/DVD

SATTV CATV

RECALL STILL

M

ULTIMEDIA

PR

V O

L

V O

L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

SLEEP

S

W

A

P

O

S

I

T

I

O

N

P

I

P

R

S

.

E

F

E

C

T

S

O

U

R

C

E

P

R

PICT. MODE

SOUND

MODE

I-II

X

?

F

.

F

/

S

L

O

W

P

L

A

Y

F

.

R

/

S

L

O

W

S

T

O

P

N

E

X

T

O

P

E

N

/

C

L

O

S

E

P

R

E

V

P

A

U

S

E

For Scart

(1 unit)

Speaker(2 units)

Place the small ferrite cores in the speaker cables close to the speaker terminals of the PDP unit.

9

Note

The following items are optional accessories. Refer purchasing optional accessories from Gold

Vision Local retailer or the retailer from where you purchased the unit.

Optional Accessories

Speakers

Table Top Stand

Wall Mounting Unit

11

4 • Safety Precautions 8 • Checking Accessories 12 • Panel Controls 14 • Remote Control 15 • Remote Control Setup

PREPARATION

CONNECTION

16 • Antenna Connection 18 • To Watch TV 20 • Install Program 26 • Watching Digital Broadcasts 28 • Watching Cable Broadcasts 30 • Watching Satellite Broadcasts 32 • Watching a DVD Image 34 • Watching a VCR Image 36 • Watching a Camcorder/Game Console Image 38 • Connecting PC(15Pin D-Sub) 40 • Connecting PC(DVI)

APPLICATION

MISC.

74 • Before Requesting Service 75 • Speciﬁcations

CONTENTS

43 • Selecting Picture Mode 61 •

MENU Background, Language

44 • Customising Picture

and Child Lock Setting

46 •

Adjusting Screen Size

63 •

MGDI (Meta Genuine

(Component, AV, TV)

Digital Image)

48 •

Adjusting Screen Size(PC, DVI)

65 • Time Setting 50 • Enlarging Screen Size 67 • Image Sticking 52 • Watching a Still Image Minimisation(ISM) 53 • PIP(Picture in Picture) 69 • Initialize Setting 55 • Adjusting Auto Sound Mode 71 • Setting Sleep Timer 56 • Customising Sound Mode 72 • Teletext 59 • Selecting INPUT SIGNAL 60 •

Checking the Current Input Signal

Panel Controls

12

Front Panel, Rear Panel

*

Items having the same names on the plasma display and the remote control would function in exactly the same way.

Front

MOVE/PR

Select when adjusting volume or select/adjust “MENU.”

Press when moving “MENU” or “Program”

Power button

Power control sensor

Power Standby:

Red - Standby Green - ON

STAND BY/OPERATE

ON/OFF

13

DVI-D INPUT ANT

AV1 AV2

AV3

L

R

AUDIO

S-VIDEO

VIDEO

Used when manufacturing(or manufacturer use only)

PC INPUT(15 pin D-sub)

DVI-D INPUT

COMPONENT A/V jacks (DTV/DVD INPUT jacks)

SCART, A/V INPUT/OUTPUT, Cable Receiver INPUT/OUTPUT jacks

External Speaker

Power

ANT

S-VIDEO, or A/V INPUT, Composite INPUT jacks

Right Speaker

Left Speaker

Position of

Ferrite Core

Rear

14

Remote Control

When using remote control:

•

Be sure not to allow the remote control to drop or to become wet.

•

Keep it away from hot or moist locations.

Installing the batteries in your remote control:

•

Push to open the cover of the remote control

•

Put the batteries in the battery cell after checking the polarities, and then shut the cover.

TV/VCR/DVD/SAT/CATV

Use to select channel directly 0~9

Indicates the current state and resolution.

Use this function to make video input selection.

It changes in the following sequence

TV -> AV1 -> AV2 -> AV3

Used to zoom the screen. To enlarge, press the(+)

button, and to return to the previous condition, press

the(-) button.(Zoom Mode : Zoom 0~20)

Used to display a desired menu.

Pressing the power button of the TV allows the display to be put in standby. (A red light is shown in the remote control sensor.) At this time, if you press the power button of the remote control, the display is turned ON (And shows a green light in the sensor).

Used to view a still picture whilst watching moving images.(Sound can be heard.)

Use this function to make video input selections. It changes in the following sequence PC -> DVI -> Component 1-> Component 2 -> PC

Adjusts the size of the screen (Normal, 16:9, etc.)

Each time you press this button, a different input mode appears. The sequence is as follows: 15Min. -> 30Min. > 60Min. -> 90Min. -> 120Min. -> OFF After the time is selected, the TV automatically goes into a stand-by state.

Recall

Zoom button

Menu button

V olume button ◀◀/▶▶Adjusts the volume. Screen Size button

Sleep Timer

Power button

Still

Channel Number (0~9)

Multimedia

PR button ▼▼/▲▲Adjusts the channel.

Note

• Use two “AAA” batteries.

• Be sure to use replacement batteries of the

same type as the original ones.

• The life of a battery depends on how much it has been used.

*

The number in

()

indicates the page in which

the function of each button is explained in detail.

It returns to previous channel.

Previous Program button

Mute sound.

Mute button

Whenever pressing the button, it cycles

in the following order.

Normal -> Dynamic -> Cinema -> User

Picture Mode button

VIDEO/DVD Function

l - ll

- Selects the language during dual language broadcast.

- Selects mono sound during stereo broadcast.

Whenever pressing the button, it cycles

in the following order.

Normal -> Movie -> Music -> News -> User

Whenever pressing the button, it cycles

in the following order.

Off-> BBE -> M.Voice

Sound Mode button

Teletext Function

19

52

59

46

PIP Mode Function

53

71

72

55

Sound Effect button

57

43

20

50

59

60

19

RECALL STILL

O

Z

V O L

P

R

E

V

PICT.

MODE

PIP

S.EFFECT

SATTV CATV

MULTIMEDIA

PR

-

M

O

P

R

X

MENU

PR

Z

O

M

+

V O L

E

Z

I

S

N

E

R

C

S

SLEEP

?

SOUND

MODE

POSITION

SOURCE

PLAYF.R/SLOW

OPEN/

CLOSE

SWAP

F.F/SLOW

PR

STOP

PAUS E

15

Remote Control Setup

- The remote control provided is designed to operate the PDP set.

- However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control.

HOW TO SET UP THE REMOTE CONTROL FOR USING OTHER DEVICES .

• Turn on the device. (Cable Converter, VCR , DVD or Satellite Broadcasting Receiver)

• Press the device selection button of remote control until it is ﬂickering. It takes about 3 seconds.

• Press the assigned three digits code of the device using number key button of the remote control toward the IR

receiver of the device. The code number is provided below. Whenever pressing the number, the device selection button will be ﬂicked once.

• If the code is set properly, the device will turn off automatically. If not, repeat the process 3.

• As the device is turned off, press the ﬂickering device selection button of the remote control once.

Then the lamp of the button will be turned off.

• Now, the setting-up of the device can be controlled by PDP remote control.

Remote Control Setup Code

DAEWOO 002 008 060 062 063 067

068

JVC 003 006 009 043 044 046

084 089

111 114 124 MITSUBISHI 046 052 075 122 PANASONIC 016 070 087 088 106 PHILIPS 005 040 042 045 048 049

053 064

078 081 090 108 SAMSUNG 041 055 056 059 061 065

066 091 095 SHARP 048 049 057 074 SONY 047 050 051 076 080

DVD

DAEWOO 152 160 LG 150 168 169 PANASONIC 157 170 PHILIPS 155 SAMSUNG 151 163 164

DAEWOO 002 PHILIPS 018 031 032 SAMSUNG 079

Remote Control supporting the multi brand devices.

Notices:

- All the preset codes are erased when replacing the battery. In this case, you must set the remote control again.

- Some of the products may not be applied because of different signal system.

- This is only for the basic control of the devices.

VCR (STANDARD : 002) SAT (STANDARD : 002)

Maker (Brand) Name Code Number (3 digit) List Maker (Brand) Name Code Number (3 digit) List

CTV Antenna Connection

16

TV antenna installation may be found in most.

When a coaxial cable is used

Plug the coaxial cable to the antenna socket, and ﬁx it ﬁrmly.

When a feeder cable is used

ANT/CABLE 1

Coaxial cable

Antenna Connection

17

Outdoor antenna connection-such as VHF or/and UHF-may be necessary for installation at private

houses

Single Antenna Connection.

Separate Antenna Connection.

VHF Antenna

UHF Antenna

ANT/CABLE 1

Outdoor Antenna Connection

VHF-Antenna

UHF-Antenna

In case of coaxial cable

In case of feeder cable

Antenna combining

adapter

(separate purchase)

To Watch TV

18

- The buttons on the keypad in the PDP unit, which have the same name as those on the remote control, perform the same function as the remote control.

VCR/DVD

SATTV CATV

RECALL STILL

MULTIMEDIA

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

SLEEP

SWAP

POSITION

PIP

PR

S.EFFECT

SOURCE

PR

PICT.

MODE

SOUND

MODE

I-II

X

?

F.F/SLOW

PLAYF.R/SLOW

STOP

Press the “ON/OFF” button of the PDP unit.

•The “▼PR▲” or power button of the remote control and the keypad on the PDP unit would be operated only when the "AC Power" of the PDP unit is supplied. Otherwise, neither the remote control nor keypad of the PDP unit can turn on the PDP.

To mute the sound

1. Press the “ ” button.

2. No sound is heard if “MUTE” is displayed

on the screen.

3. Sound is heard again if pressing the “ ”

button once again. For example, you can use this button when telephone rings or when guest comes while watching TV.

Check of TV operation status

• If pressing the “RECALL” button, the status

of the program or broadcasting being currently watched or entry status of video component is displayed on the screen.

To Watch TV

When pressing the program button

•Select two digits if using the number button for Program selection. For example, to watch Program No.9, press the number buttons 0 and 9. If pressing only number 9, it takes more time than pressing two digits for selecting a channel.

Auto Power Off

• If TV broadcast for the day is ﬁnished, the TV will automatically turn off after about 30 minutes. However, if the Off-timer or Sleep timer is operating, it takes precedence. This auto power off feature only operates in the TV mode.

19

Press the “ON/OFF” button.

• Press the “ON/OFF” button of the PDP unit.

• The LED of the PDP unit turns red colour.

• Press the “▼PR▲” , power button of the remote control, or any button on the keypad of the PDP unit.

• The LED of the PDP unit turns “green” colour and the TV turns on.

• To watch analog TV broadcasts,

select the correct input, i.e. 'PR' in the on screen display box.

Select Program.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Select the desired program by pressing the “▼PR▲” button or the number button.

Ex) Program 09

Adjust V olume.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

•Sound reduces if pressing the “◀VOL” button.

• Sound increases if pressing the

“VOL▶” button.

3

1

2

Press the “Power” Button to T urn the TV off.

• TV turns off and the LED of the PDP unit changes to red colour.

4

ON/OFF

_____

PR 09

MONO PM 12 : 00

10Volume

Install Program

20

VCR/DVD

SATTV CATV

RECALL STILL

MULTIMEDIA

PR

V

O

L

V

O

L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

SLEEP

S

W

A

P

O

S

IT

IO

N

P

IP

P

R

S

.E

F

E

C

T

S

O

U

R

C

E

PICT.

MODE

SOUND MODE

I-II

X

?

F

- This is the function for the TV to memorize the broadcasting channels. If the Auto Setup is done, you can simply ﬁnd programs with “▼PR▲” buttons and so need not select programs by pressing each program number.

- Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the “▼PR▲” button or Number buttons to scan the stations you programmed. Stations can be tuned using “Auto Setup” or “Manual Setup”.

Auto Setup

Press the “Menu” Button.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• The menu screen appears as follows.

• Press the “▼PR▲” button and select “Install”.

Press the

“◀◀VOL▶▶”

Button.

1

2

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

Picture

Sound

Screen

Features

Install

Move

Mode Brightness Contrast Colour Sharpness Colour Temp.

Select

Normal

MENU

32 48 32 32

Exit

Auto Setup

Picture

Edit Manual Setup

Sound

Screen

Features

Install

MENU

Move

Select

Exit

21

Select the “Auto Setup”.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Select the “Auto Setup” with the “▼PR▲” button.

• Then press the “◀VOL▶”

button.

Select the “Country”.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• There are 18 countries for selection. Choose the desired country before starting the search.

• If there is no proper country, select the "Others".

Select the “Search”.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Press the “VOL▶” key to start searching.

• Then it automatically searches channels as on the right.

• While searching, if you press the "Menu" button, the automatic channel search is stopped. But, channels searched by that time are saved.

5

3

4

Auto Search is completed.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Edit menu appears as on the right if the search is completed.

• Refer to “Edit” on the following pages.

• The order of stored program may differ among countries.

6

Picture

Sound

Screen

Features

Install

Move

Auto Setup Edit Manual Setup

Select

Auto Searching...

Please wait ...

MENU

Exit

MENU

15%

Exit

Picture

Sound

Screen

Features

Install

Move

Auto Setup Country Search

Adjust

GB

MENU

Exit

Edit

PR CH Name Skip PR98 S41 _ _ _ _ o PR99 S41 _ _ _ _ o PR0 C69 _ _ _ _

PR1 S41 _ _ _ _ o

PR2 S41 _ _ _ _ o PR3 S41 _ _ _ _ o PR4 S41 _ _ _ _ o

Adjust Move

MENU

Delete Skip

Exit

VCR/DVD

SATTV CATV

RECALL STILL

MULTIMEDIA

PR

V

O

L

V

O

L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

SLEEP

SWAP

POSITION

PIP

PR

S.EFFECT

SOURCE

PR

PICT.

MODE

SOUND

MODE

I-II

X

?

F.F/SLOW

PLAYF.R/SLOW

STOP

CLOSE

Edit

Deleting the Program.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Place the selection bar on the program that you want to delete using the “▼PR▲” buttons.

• Press the Delete(Yellow) button.

• The deleted program goes to PR number 99 for recover.

Moving the Program Positions

SLEEP

PICT.

MODE

SOUND

MODE

I-II

X

?

• Place the selection bar on the program that you want to move.

• Press the Move(Green) button.

• It becomes ready for moving as the colour of

selection changes to green.

• Move the program that you desire to move to the wanted PR number.

• Press the Move(Green) button again to ﬁnish.

The colour of selection changes to yellow.

Skipping the Channels

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Press the “Red” button to skip the selected program. In order to skip other programs, use the “▼PR▲” buttons to move to the unwanted channels.

• The program marked with circle ( O ) means it is skipped.

SLEEP

PICT.

MODE

SOUND

MODE

I-II

X

?

3

1

2

22

Edit

PR CH Name Skip PR98 S41 _ _ _ _ o PR99 S41 _ _ _ _ o PR0 C69 _ _ _ _

PR1 S41 _ _ _ _ o

PR2 S41 _ _ _ _ o PR3 S41 _ _ _ _ o PR4 S41 _ _ _ _ o

MENU

Delete Skip

Exit

Adjust Move

23

Press the Number Buttons(0~9) or the

“◀◀VOL▶▶”

Button to Select a Program Number Y ou W ant.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

Find the Desired Channel.

PR

V O

L

V O L

Z

O

M

+

Z

O

M

-

MENU

P

R

E

V

P

R

S

C

R

E

N

S

I

Z

E

• Using “◀VOL▶” button or number keys, select the desired channel directly, if you know it otherwise step through the numbers using the VOL▶ button until you find the right channel.

• By pressing red teletext button, you can toggle Cchannel to S-channel.

1

2

Manual Setup

Name the Program.

• Using “◀VOL▶” button, move the position where you want to write the character.

• Select the desired character with the “▼PR▲” button.

• There are A-Z, +, ., /, and 0-9 characters.

• After naming, you can exit by pressing the

"Menu" key.

3

Picture

Sound

Screen

Features

Install

0 ~ 9

Move

Adjust

Manual Setup Program Channel Name System Fine Tune Search Memory

Adjust

Manual Setup

Picture

Program Channel

Sound

Name System

Screen

Fine Tune Search

Features

Memory

Install

Adjust

Adjust Cable/Air

Move

0 ~ 9

01

C06

_ _ _ _ _

GB

48

MENU

Exit

01

C06

_ _ _ _ _

GB

48

MENU

Exit

VCR/DVD

SATTV CATV

RECALL STILL

PR

-

M

O

Z

V O L

MENU

P

R

E

V

P

R

PR

MULTIMEDIA

Z

O

M

+

S

N

E

R

C

S

V O L

E

Z

I

SLEEP

?

X

PICT.

MODE

SOUND

MODE

I-II

SWAP

POSITION

Manual Setup

Picture

Program Channel

Sound

Name System

Screen

Fine Tune Search

Features

Memory

Install

Move

Adjust

01

C06

_ _ _ _ _

GB

MENU

48

Exit

PIP

S.EFFECT

PLAYF.R/SLOW

OPEN/ CLOSE

F.F/SLOW

PR

STOP

PAUSE

Gold Vision GV-4240NAS Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual