Goldstar LXA1210ACL, LXA1010ACL Owner’s Manual
website http:flwww.lgservice.com
e-mail http://www.lgeservice.com!techsup.htm!
ROOMAiR
'S
Please read the operating instructions and safety precautions _refully
and thoroughly before installing and operating your room air mnditioner.
CONDITIONER
L
MANUELD'UTILISATION
A
Ell T
Veuillez life attentivement et en entier ce guide d'utilisation et les
mesures de s6curit6 cHncluses avant de proc6der _ I'installation et au
fonctionnement de votre climatiseur.
FOR "YOURRECORDS
Staple your f:eceipt to this page in case you ne_ it later:
Write dow¢_the mode! and serial numbers here:
Model #
You can find them on a label on the side of each unit,
_aler's Name
DatePurchased
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little preventive
care on your part can save you a great deal of time and
money over the life of your air conditioner.
You'll find many answers to common problems in the chart
of troubleshooting tips If you review our cha_ of
Troubleshooting Tips first, you may not need to caglfor
service at all.
• Contact an authorized Service technician for repair or
maintenance of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• "Youngchildren should be supervised to ensure that they
do not play with the air conditioner.
fety Precautions
To prevent injury to the user or other p_ple and proper%,damage, the following instructions must be
followed.
m Incorrect operation due to ignoring of instruction will cause harm or damage,
The seriousness is classified by the following indications,
_f_ This symbol indicates the possibility of death or serious injury.
II Meanings of symbols used in this manual are as shown below.
f®@@
•Otherwise, it will cause electric
shock or fire dueto heat
generation.
• It will cause electric shock or fire
due to heat generation.
WARN|NG
• it will cause electric shock or fire
due to heat generation.
• It will cause eleddc shock.
• it will cause electdc _ock or fire_
• Ifthe power _rd is damaged, it
must be replaced _ the
manufacturer or an authorized
service center or a simi_a.Hyqualified
_rson inorder to avoid a hazard.
• This could damage your health.
•Theyaresharpandmaycause
aninjury.
, Watermayentertheunitand
degra_theinsulation.It:may
causeanelectricshock,
• Since the fan rotates athiglh
s_ed during operation, it may
cause an injury'.
•Thiscouldinjurethepets
orplants.
•Itmaycauseafireor
deformationofthecabinet.
, _ notusethisair conditioner to
tPoreServeprecision devices,
od, pets, plan_, and art
objects.
Utmay cause deterioration of
quality, etc.
• _tmay cause an electric shock.
Bectrical Data
Electrical Data(For 115Vmodel)
Line Cord Plug Use Wall Receptacle Power Supply
Parallel
Standard 125V, 3-wire grounding
receptacle rated 15A, 125V AC
Use 15 AMP time
delay fuse or 15 AMP
circuit breaker.
USE OF EXTENSION CORDS
Because of potenti_ safety hazards, we strongly discourage the use of an extension cord. However, if you wish to
use an extension cord, use a CSA certified!UL-Hsted3-wire (grounding) extension cord, rat_ 15A, 125V.
Electrical Data(For230/208Vmodel)
Line Cord Plug Use Wall Receptacle Power Supply
Do not under an€
Jrcumstance,s cut
r remove the
rounding prong
rom the p_ug. )
supply cord with
3-prong grounding plug
Tandem
Standard 250V, 3-wire grounding
receptacle rated 15A, 250V AC
Use 15 AMP
time delay fuse or
circuit breaker.
_-q fDo not under any"
_ // circumstan_s cut
_//,,._ or remove the
_.._ [ grounding prong
"-_J E from the pUug
Power supply cord with
3-prong grounding plug
All wiring should be made in accordance with local electrical codes and regulations.
NOTE • Aluminum house wiring may pose sp_ial problems. Consult a qualified electrician.
Standard 250V, 3-wire grounding
receptacle rated 20A, 250V AC
Use 20 AMP
time delay fuse or
circuit breaker.
Refer to the nameplate
for correct fusing.
[] ELECTRICAL SAFETY
IMPORTANT GROUNDING INSTRUCTIONS
Air conditioner has a three-prong grounding plug
on its power supply cord, which must be plugged
into properly grounded three-prong wall
receptacle for your protection against possible
shock h_ard.
FUSE - Use a time-delay fuse or circuit breaker.
Refer to the nameplate for proper power supply
requirements.
208, 230, and 208/230 VOLT UNITS
These units are equipped with a three-prong
grounding plug on the power supply cord, which
must be plugged into a matching properly
grounded three-prong wall receptacle for your
protection against possible shock h_ard. Ifsuch
an outlet is not present, one must be installledby a
qualified electrician in accordance with the National
Electrical Code and local codes and ordinances.
NOTE: DO NOT USE AN EXTENSION CORD
ON 20& 230, AND 208/230 VOLT UNITS.
Loading...