Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
008_051514
014_020416
To avoid burns, DO NOT touch the kettle or any heated surface.
DO NOT place or leave objects in contact with heated surfaces.
ALWAYS wear safety glasses when servicing this equipment.
No user serviceable parts inside. Refer servicing to qualified service
personnel.
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
013_092414
010_010914
011_051514
022_060215
Models #2024, 2024ST
16 oz. Econo-16
3
WARNING
WARNING
SAFETY PRECAUTIONS (continued)
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
This machine is NOT to be operated by minors.
Note: Improvements are always being made to Gold Medal’s equipment. This information may
not be the latest available for your purposes. It is critical that you call Gold Medal’s Technical
Service Department at 1-800-543-0862 for any questions about your machine
operations, replacement parts, or any service questions. (Gold Medal Products Co. does
not assume any liability for injury due to careless handling and/or reckless operation of this
equipment.) General images may be used in manual for reference only.
012_010914
007_010914
Models #2024, 2024ST
16 oz. Econo-16
4
DANGER
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims should be
filed immediately with the transportation company. The warranty does not cover damage that occurs in
transit, or damage caused by abuse, or consequential damage due to the operation of this machine, since it
is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this equipment.
To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
Model 2024: 16 oz. Econo-16 Popper with LED cabinet lighting, and a red dome.
Model 2024ST: 16 oz. Econo-16 Popper with LED cabinet and sign lighting, and stainless steel dome.
Setup
This unit has been tested at the factory.
1. Remove all packaging and tape prior to operation.
2. Place the unit on a sturdy, level base.
3. The door knobs are shipped facing the inside of the machine. Re-adjust knobs to face the
outside of the machine.
4. After setup, unit should be cleaned prior to use (see Care and Cleaning section of this manual).
Electrical Requirements
The following power supply must be provided:
Model 2024 and 2024ST: 120 V~, 1900 W, 60 Hz
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
A certified electrician must furnish sufficient power for proper machine operation and install any supplied
receptacle. We recommend this equipment be on a dedicated and protected circuit. Failure to wire properly
will void the warranty and may result in damage to the machine. It is Gold Medal Products Co.’s
recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not
recommended due to safety concerns, and may cause sacrificed and/or reduced performance. Make sure
cord is located to prevent a trip hazard or unit upset.
008_051514
Models #2024, 2024ST
16 oz. Econo-16
5
CAUTION
Before You Plug In Machine
1. Make sure all machine switches are OFF before plugging equipment into receptacle.
2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power supply
cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent electrician inspect
the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).
5. Install unit in a level position.
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
Models #2024, 2024ST
16 oz. Econo-16
6
Kettle Size
Popcorn Charge
Oil Charge
Flavacol (Salt)
OPERATING INSTRUCTIONS
CONTROLS AND THEIR FUNCTIONS
LIGHT SWITCH
Operates cabinet lighting (and sign lighting for Model 2024ST).
WARMER SWITCH
Operates the heaters for the heated corn pan.
KETTLE HEAT SWITCH (and Indicator Light)
Operates the heating elements in the popping kettle. The Indicator Light will turn ON when the Kettle
Heat Switch is ON.
KETTLE MOTOR SWITCH
Operates the kettle agitator motor.
Popping Instructions
Amount of Popcorn and Oil – Salted Popcorn
The popper is equipped with a corn, salt, and oil measure. We recommend flavored and colored coconut oil.
Popcorn popped in coconut oil stays fresh longer and does not leave black deposits in the kettle like other
oils. Use only top quality, fresh popcorn from reputable suppliers.
16 oz. 16 oz. (473 ml) 5 oz. (148 ml) 1.5 Tblsp. (20cc)
For best results use Mega-Pop® 16 oz. premeasured pouches (Item# 2846).
Popping Standard (Salted) Popcorn
1. Turn all switches ON.
2. To determine when kettle is ready to pop corn (about 4 minutes), test pop three kernels of corn
in one ounce (30 ml) of popping oil. When kernels pop, kettle is ready.
3. Lift kettle lid and load Mega-Pop® premeasured popcorn and oil pouch, or pour in popcorn and
Flavacol, then add oil in premeasured amount; close lid.
4. When corn has finished popping, gently dump the popcorn.
5. On final kettle of corn, turn Kettle Heat Switch OFF just as lids are forced open by the popping
corn. This procedure saves electricity, since kettle has plenty of heat, and helps eliminate
smoke/odor from any oil residue that remains after popping has stopped.
6. When finished popping, turn KETTLE HEAT and KETTLE MOTOR switches OFF.
NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING CORN!
Models #2024, 2024ST
16 oz. Econo-16
7
DANGER
WARNING
Care and Cleaning
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water. DO NOT clean appliance with a water jet.
Always unplug the equipment before cleaning or servicing.
To avoid serious burns, DO NOT touch the kettle while it is hot!
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only use nontoxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of advertising your
product.
Note: It is extremely important to follow all cleaning procedures, otherwise parts damage and
equipment failure will result. The warranty does not cover parts that are damaged due to
improper cleaning.
025_111616
028_082715
Daily Kettle Cleaning Instructions
CAUTION: A hot kettle will cause burns if you touch it with your hand. Allow kettle to cool at least 1
hour before attempting to clean. DO NOT use ice or water to cool down a hot kettle!
Severe kettle damage will result!
1. When cool, wipe outside of kettle with a clean, soft cloth. DO NOT use oven cleaners or abrasive
materials as they will damage the kettle.
2. Every night, mix Gold Medal’s Heat’n Kleen solution (Item No. 2095), 2 tablespoons per gallon of
water. It is not necessary to use the entire gallon at once; only use enough to fill the kettle 1/2
inch deep.
3. Turn kettle heat ON. When water starts to boil, turn kettle heat OFF.
4. Allow to cool at least 1 hour, then dump solution into a bucket and wipe inside of kettle with a
clean cloth. Make sure all solution goes into the bucket; do not spill any in the interior of
machine.
For an extra dirty kettle, the process may be repeated; or, after turning kettle heat OFF, allow
solution to sit in kettle overnight. The next morning, dump solution into a bucket and wipe inside
of kettle with a clean cloth.
5. With unit OFF and unplugged, wipe kettle lead cord with a clean SLIGHTLY damp cloth. DO NOT
get moisture into the kettle lead-in cord, severe damage will result.
Daily Unit Cleaning Instructions
1. Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2. Clean all pans/accessories in order to sanitize them before each use.
3. Take a clean, SLIGHTLY damp cloth and wipe excess grease from glass and cabinet.
Models #2024, 2024ST
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.