Gold Medal 8160F, 8161F, 8162, Unifloss 3034, Unifloss 3034GT Instruction Manual

Fence Grills

Instruction Manual

Model No. 8160, 8161, and 8162 Series

10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA

Part No. 85073

Fence Grills Model No. 8160, 8161, and 8162 Series

SAFETY PRECAUTIONS

DANGER

Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle.

DANGER

Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition. This appliance is not intended to be operated by means of an external timer or separate remote-control system. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment.

008_051514

014_020416

WARNING

To avoid burns, DO NOT touch heated surfaces. DO NOT place or leave objects in contact with heated surfaces.

009_092414

WARNING

ALWAYS wear safety glasses when servicing this equipment.

010_010914

WARNING

No user serviceable parts inside. Refer servicing to qualified service personnel.

011_051514

WARNING

Read and understand operator’s manual and all other safety instructions before using this equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862

022_060215

Page 2

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

SAFETY PRECAUTIONS (continued)

WARNING

DO NOT allow direct contact of this equipment by the public when used in food service locations. Only personnel trained and experienced in the equipment operation may operate this equipment. Carefully read all instructions before operation.

WARNING

This machine is NOT to be operated by minors.

Note: Improvements are always being made to Gold Medal’s equipment. This

information may not be the latest available for your purposes. It is critical that you call Gold Medal’s Technical Service Department at 1-800-543-0862 for any questions about your machine operations, replacement parts, or any service questions. (Gold Medal Products Co. does not assume any liability for injury due to careless handling and/or reckless operation of this equipment.)

012_010914

007_010914

Page 3

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

INSTALLATION INSTRUCTIONS

Inspection of Shipment

After unpacking, check thoroughly for any damage which may have occurred in transit. Claims should be filed immediately with the transportation company. The warranty does not cover damage that occurs in transit, or damage caused by abuse, or consequential damage due to the operation of this machine, since it is beyond our control.

Model Description

8160F: Small Flat Fence Grill (same width as 8162, but longer depth), unit has

2 Heat Controls.

8162: Small Flat Fence Grill, unit has 1 Heat Control. 8161F: Large Flat Fence Grill, unit has 2 Heat Controls.

Setup

Your new Fence Grill is fully assembled and tested at the factory.

1. Remove all packaging and tape.

2. Wipe grill clean prior to operation by using a damp washcloth.

3. Place fence on grill by aligning the pins on the grill with the slots in the fence.

Page 4

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

Electrical Requirements

The following power supply must be provided:

8160F, 8162: 120 Volts, 1750 Watts, 60Hz. 8161F: 120 Volts, 1700 Watts, 60Hz.

DANGER

Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle.

A certified electrician must furnish sufficient power for proper machine operation and install any supplied receptacle. We recommend this equipment be on a dedicated and protected circuit. Failure to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance. Make sure cord is located to prevent a trip hazard or unit upset.

008_051514

Before You Plug In Machine

1. Make sure all machine switches are OFF before plugging equipment into receptacle.

2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power

supply cord.

3. The wall outlet must have the proper polarity. If in doubt, have a competent

electrician inspect the outlet and correct if necessary.

4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).

5. Install unit in a level position.

If the supply cord is damaged, it must be replaced by Gold Medal Products Co., its service agent or similarly qualified persons in order to avoid a hazard.

CAUTION

039_080614

Page 5

gmpopcorn.com

ON/OFF Power Switch

Heat Control for

NOTE: Model 8162 only

has

Fence Grills Model No. 8160, 8161, and 8162 Series

OPERATING INSTRUCTIONS

Controls and Their Functions

ON/OFF POWER SWITCH

Provides power to the Motor and the Heat Control(s). Switch has a built in pilot light to indicate that there is power to the unit.

HEAT CONTROLS

Models 8160F and 8161F have two Heat Controls which cover the upper and lower zones; Model 8162 has one Heat Control. These controls have a positive OFF and are variable from low to high.

Operating Instructions

1. Be sure grill surface is clean, and fence is placed on grill and aligned with pins.

2. Turn the Power Switch ON.

3. Turn Heat Control(s) fully clock-wise to “High” position.

4. Pre-heat the grill for 15 minutes.

5. Place pre-cooked product on grill between the fence rails.

Upper Zone

Lower Zone

one Heat Control.

6. Cook for 20-30 minutes and check product temperature with cooking thermometer

(should be 150 Degrees F). Adjust heat as necessary to raise the temperature of the food to 150 Degrees Fahrenheit.

7. Carefully remove and serve product.

Page 6

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

Care and Cleaning

DANGER

Machine must be properly grounded to prevent electrical shock to personnel.

DO NOT immerse in water.

Always unplug the equipment before cleaning or servicing.

WARNING

To avoid burns, DO NOT touch heated surfaces. DO NOT place or leave objects in contact with heated surfaces.

Good sanitation practice demands that all food preparation equipment be cleaned regularly (only use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of advertising your product.

025_020314

009_092414

Follow the directions below to clean and sanitize the unit each day after use.

1. With the machine OFF, unplug the unit and allow it to cool before attempting to clean.

2. Take fence off the cooking surface and clean it with mild soap and hot water.

DO NOT use oven cleaners or abrasive materials (e.g. steel wool or abrasive pads) on cooking surface, fence, or stainless steel body.

3. Empty drip pan, and clean with mild soap and hot water.

4. Clean the outside of the unit using a soft cloth dampened with a mild soap and hot

water.

Wipe stainless steel parts with a clean cloth and cleaner designed for stainless steel, such as Gold Medal Watchdog Stainless Cleaner (Item No. 2088).

DO NOT use oven cleaners or abrasive materials as they will damage parts of the machine.

5. Dry the unit completely with a soft, dry cloth.

6. When unit is dry, place fence back on grill (align the pins on the grill with the slots in

the fence), and reinsert the drip pan.

Page 7

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

MAINTENANCE INSTRUCTIONS

DANGER

Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle.

DANGER

Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury, or death. Any alterations to this equipment will void the warranty and may cause a dangerous condition. This appliance is not intended to be operated by means of an external timer or separate remote-control system. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment.

008_051514

014_020416

No user serviceable parts inside. Refer servicing to qualified service personnel.

THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE OPERATOR.

WARNING

011_051514

CAUTION

027_010914

Page 8

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

Ordering Spare Parts

1. Identify the needed part by checking it against the photos, illustrations, and/or

parts list.

2. When ordering, please include part number, part name, and quantity needed.

3. Please include your model number, serial number, and date of manufacture (located

on the machine nameplate) with your order.

4. Address all parts orders to:

Parts Department Gold Medal Products Co. 10700 Medallion Drive Cincinnati, Ohio 45241-4807

Or, place orders by phone or online:

Phone: (800) 543-0862

(513) 769-7676

Fax: (800) 542-1496

(513) 769-8500 E-mail: info@gmpopcorn.com Web Page: gmpopcorn.com

Page 9

gmpopcorn.com

8160

F 8161

F 8162

1 COOK PLATE, MACHINE

1

85000

85035

17357

FENCE WELDMENT (Model No. 8162

also

has

MOVABLE BAR

6

17364

3 SWITCH, ROCKER DPST

1

55395

4 I

NNER SLIDE WELD. (pins the fence ride

on) 2 85024

85024

5 CONTROL LABEL

1

85049

17470

HEAT CONTROL KNOB

2

87049

HEAT CONTROL KNOB

1

87049

7 #10 X 3/8 P/H SMS TYPE B

16

52277

8 FENCE GLIDES

(Plastic)

4

85051

17374

9 DRIP PAN

1

85097

85041

85097

10 BOTTOM COVER

1

85020

85048

17359

11 GLIDE

4

47328

12 SCREW, 10

-

24 X 3/4 HXHD

4

41314

13 CRUTCH TIP BLACK 70 DURO

4

49123

3

Bottom View

Exterior View (Model 8161

F

Fence Grills Model No. 8160, 8161, and 8162 Series

Cabinet Exterior

2

1

4

5

6

7

8

9

10

11, 12, 13

shown for reference)

Item

2

movable bars)

Part Description Qty.

1 85053 85071 17362

Part Number

6

Page 10

gmpopcorn.com

9 22 24 25 23

Interior

- Control View

8

Fence Grills Model No. 8160, 8161, and 8162 Series

Cabinet Interior - Control View

12

9

15

21

16

13

14

1

2, 3, 4

5

7

10, 11

18, 19, 20

17

6

(Model No. 8162 shown for reference)

Page 11

gmpopcorn.com

8160

F 8161

F 8162

HEAT CONTROL

2

85002

HEAT CONTROL

1

85002

2 BALL BEARING 8X22X7

4

85136

3 AGITATOR BRG HUB

4

43434

4 5/16 SPACER

4

85137

5 SNAP BUSHING

2

45396

6 INNER SLIDE WELDMENT

2

85024

7 OUTER SLIDE W/STUDS

2

85138

8 U CLIP

2

55215

DRIVE ASSY (Complete assembly includes

10 CROSS BAR

1

69861

69701

69861

11 FLANGED BUSHING

2

85008

12 ROLLER BEARING

2

69704

13 #10-24 FLAT SOCKET HEAD S

2

69706

14 DRIVE LINK

2

69859

15 1/4-20 X 3/4 GRADE 5 BOLT (w

Lock

Washer)

3

74520

16 MOTOR LINK

1

69860

17 DRIVE BAR

1

69858

17356

18 AGITATOR BRG HUB

2

43434

19 FLANGE BUSHING

2

69862

20 10-32 X .875 PH FLAT M/S

2

12891

21 1/4-20 X 3/8 SET SC

3

69703

22 MOTOR PLATE REPLACEMENT KIT

1

85135

23 SNAP BUSHING

1

47236

24 LEAD

-

IN CORD 15 AMP PLUG

1

87085

25 STRAIN RELIEF SR7W

-

2

1

67060

Fence Grills Model No. 8160, 8161, and 8162 Series

Cabinet Interior - Control View

Item

1

9

items 10-22 below)

Part Description Qty.

1 69700 69702 17355

Part Number

Page 12

gmpopcorn.com

2 3

Fence Grills Model No. 8160, 8161, and 8162 Series

Cabinet Interior - Element View

1

10

9

4

5

8

7

6

Page 13

gmpopcorn.com

8160

F 8161

F 8162

1 ELEMENT CLAMPS

4

85027

2 BULB COVER

2

85028

BULB KEEPER

2

17411

3 10-32 X 1/4 PHIL PAN M/S

12

12513

HEAT ELEMENT, 860W

2

85108

850W HEAT ELEMENT

2 85110

5 ELEMENT CLAMPS

4

85040

6 BAFFLE PLATE

1

85111

85112

17370

7 CROSS BAR

1

69861

69701

69861

8 FLANGED BUSHING

2

85008

9 MOTOR SHIELD

1

85060

17369

10 MOTOR

1

17477

Fence Grills Model No. 8160, 8161, and 8162 Series

Cabinet Interior - Element View Parts List

Item

4

Part Description Qty.

Part Number

Page 14

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

WIRING DIAGRAM

Model No. 8160F and 8161F

Page 15

gmpopcorn.com

Fence Grills Model No. 8160, 8161, and 8162 Series

Model No. 8162

Page 16

gmpopcorn.com

10700 Medallion Drive, Cincinnati, Ohio 45241

-

4807 USA

Phone:

(800) 543

-

0862

Fax: (800) 542

-

1496

Fence Grills Model No. 8160, 8161, and 8162 Series

WARRANTY

Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to be free of defects in workmanship and material under normal use and service. Gold Medal Products Co.’s obligation under this warranty is limited solely to repairing or replacing parts, f.o.b. Cincinnati, Ohio, which in its judgment are defective in workmanship or material and which are returned, freight prepaid, to its Cincinnati, Ohio factory or other designated point. Except for “Perishable Parts” on specific machines, the above warranty applies for a period of two (2) years from the date of original sale to the original purchaser of equipment when recommended operating instructions and maintenance procedures have been followed. These are packed with the machine. Parts warranty is two (2) years, labor is six (6) months.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. In no event shall Gold Medal Products Co. be liable for special, incidental or consequential damages. No claim under this warranty will be honored if the equipment covered has been misused, neglected, damaged in transit, or has been tampered with or changed in any way. No claim under this warranty shall be honored in the event that components in the unit at the time of the claim were not supplied or approved by Gold Medal Products Co. This warranty is effective only when electrical items have been properly attached to city utility lines only at proper voltages. This warranty is not transferable without the written consent of Gold Medal Products Co.

The term “Original Purchaser” as used in this warranty shall be deemed to mean that person, firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO., or their authorized distributor for the equipment.

THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM, AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR REPLACEMENT OF PARTS.

NOTE: This equipment is manufactured and sold for commercial use only.

(513) 769-7676 (513) 769-8500

© 2016 – The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website display, without its express written consent.

gmpopcorn.com

Page 17

gmpopcorn.com