Gold Medal 2488, Super 88, 2488EX, 2489EX, 2489 Instruction Manual

Super 88
Instruction Manual
Model No. 2488, 2489, 2488EX, 2489EX
Part No. 49555
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
cause property damage, injury, or death. Any alterations to this equipment will
Super 88 Model No. 2488, 2489, 2488EX, 2489EX
SAFETY PRECAUTIONS
DANGER
Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death. DO NOT immerse any part of this equipment in water. DO NOT use excessive water when cleaning. Keep cord and plug off the ground and away from moisture. Always unplug the equipment before cleaning or servicing. Make sure all machine switches are in the OFF position before plugging the equipment into the receptacle.
DANGER
Improper installation, adjustment, alteration, service, or maintenance can
void the warranty and may cause a dangerous condition. NEVER make alterations to this equipment. Read the Installation, Operating, and Maintenance Instructions thoroughly before installing, servicing, or operating this equipment.
008_051514
014_051514
WARNING
To avoid burns, DO NOT touch the kettle or any heated surface. DO NOT place or leave objects in contact with heated surfaces.
013_092414
WARNING
ALWAYS wear safety glasses when servicing this equipment.
010_010914
WARNING
No user serviceable parts inside. Refer servicing to qualified service personnel.
011_051514
WARNING
Read and understand operator’s manual and all other safety instructions before using this equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862
022_060215
Page 2
gmpopcorn.com
Super 88 Model No. 2488, 2489, 2488EX, 2489EX
SAFETY PRECAUTIONS (continued)
WARNING
DO NOT allow direct contact of this equipment by the public when used in food service locations. Only personnel trained and experienced in the equipment operation may operate this equipment. Carefully read all instructions before operation.
WARNING
This machine is NOT to be operated by minors.
Note: Improvements are always being made to Gold Medal’s equipment. This
information may not be the latest available for your purposes. It is critical that you call Gold Medal’s Technical Service Department at 1-800-543-0862 for any questions about your machine operations, replacement parts, or any service questions. (Gold Medal Products Co. does not assume any liability for injury due to careless handling and/or reckless operation of this equipment.)
012_010914
007_010914
Page 3
gmpopcorn.com
Super 88 Model No. 2488, 2489, 2488EX, 2489EX
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims should be filed immediately with the transportation company. The warranty does not cover damage that occurs in transit, or damage caused by abuse, or consequential damage due to the operation of this machine, since it is beyond our control.
Setup
Your new Popper was assembled and tested at the factory. Remove all packing material and tape before starting operation.
Accessories Included With Your Machine
Corn Measure Cup Flavacol Cup Stamped Aluminum Scoop Oil Measure Cup.
Page 4
gmpopcorn.com
Super 88 Model No. 2488, 2489, 2488EX, 2489EX
Electrical Requirements
The following power supply must be provided for your machine:
2488: 120V, 1525W, 60Hz 2489: 120V, 1605W, 60Hz 2488EX: 230V, 1562W, 50Hz 2489EX: 230V, 1570W, 50Hz
DANGER
Machine must be properly grounded to prevent electrical shock to personnel. Failure to do so could result in serious injury, or death.
Do NOT immerse any part of this equipment in water. Do NOT use excessive water when cleaning. Keep cord and plug off the ground and away from
moisture. Always unplug the equipment before cleaning or servicing.
Your electrician must furnish sufficient power for proper machine operation. We recommend this popper be on a dedicated and protected circuit. Failure to wire properly will void the warranty and may result in damage to the machine. It is Gold Medal Products Company’s recommendation that this machine be plugged directly into a wall outlet. The use of extension cords is not recommended due to safety concerns, and may cause sacrificed and/or reduced performance.
Before You Plug In Machine
1. Make sure all machine switches are in the OFF position before plugging the equipment
into the receptacle.
2. Make sure the wall outlet can accept the grounded plugs (where applicable) on the
power supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter.
5. Install the unit in a level position.
Page 5
gmpopcorn.com
Light and
Warmer Switch
Kettle Motor
Switch
Kettle Heat
Switch
Super 88 Model No. 2488, 2489, 2488EX, 2489EX
OPERATING INSTRUCTIONS
Controls and their Functions
LIGHT AND WARMER SWITCH
Turns on the heat to the bottom corn pan and heat light.
KETTLE MOTOR SWITCH
Turns on the motor which drives the kettle agitator.
KETTLE HEAT SWITCH
Supplies power to the thermostat controlled kettle.
Amount of Popcorn and Oil
Your new Popper is equipped with a corn measuring cup. Popcorn popped in coconut oil stays fresher longer. Coconut oil does not leave black deposits in your kettle like other oils.
Corn charge – 8.0 oz. Oil charge – 2.0 oz. Flavacol – 1 tablespoon
Popping Instructions
1. Turn the Kettle Heat and Kettle Motor Switch on.
2. Make a test pop with 3 kernels of corn and 2.0 oz. of oil.
3. Turn on the kettle and let it pre-heat for 5 to 8 minutes.
4. Load pre-measured popcorn and oil into kettle.
5. When corn has finished popping, dump the kettle.
6. Repeat cycle starting with #4.
7. Turn kettle heat and motor off when finished popping corn.
Page 6
gmpopcorn.com
Super 88 Model No. 2488, 2489, 2488EX, 2489EX
Care and Cleaning
DANGER
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water.
Always unplug the equipment before cleaning or servicing.
WARNING
To avoid serious burns, DO NOT touch the kettle while it is hot!
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of advertising your product.
025_020314
028_082715
Note: It is extremely important to follow all of the cleaning procedures, otherwise
parts damage and equipment failure will result. The warranty does not cover parts that are damaged due to improper cleaning.
Daily Kettle Cleaning Instructions
CAUTION: A hot kettle will cause burns if you touch it with your hand. Allow kettle to
cool at least 1 hour before attempting to clean. DO NOT use ice or water to cool down a hot kettle! Severe kettle damage will result!
1. When cool, wipe the outside of the kettle with a clean, soft cloth. DO NOT use oven
cleaners or abrasive materials as they will damage the kettle.
2. Every night, mix Gold Medal’s Heat’n Kleen solution (Item No. 2095), 2 tablespoons
per gallon of water. It is not necessary to use the entire gallon at once; only use enough to fill the kettle 1/2 inch deep.
3. Turn the kettle heat ON. When the water starts to boil, turn the kettle heat OFF.
4. Allow to cool for at least 1 hour, then dump the solution into a bucket and wipe the
inside of the kettle with a clean cloth. Make sure all of the solution goes into the bucket; do not spill any in the interior of the machine.
For extra dirty kettles, the process may be repeated; or, after turning the kettle heat OFF, allow solution to sit in the kettle overnight. The next morning, dump the solution into a bucket and wipe the inside of the kettle with a clean cloth.
5. With the unit OFF and unplugged, wipe the kettle lead cord with a clean SLIGHTLY damp
cloth. DO NOT get moisture into the kettle lead-in cord, severe damage will result.
Page 7
gmpopcorn.com
Loading...
+ 16 hidden pages