Page 1
Fun Pop 4 oz. Popper
Instruction Manual
Model Series: 2404, 2404MD
Model 2404MD
Model 2404
© 2018 Gold Medal Products Co.
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
Part No. 59406
Page 2
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Table of Contents
SAFETY PRECAUTIONS ............................................................................................................................. 3
INSTALLATION INSTRUCTIONS .............................................................................................................. 5
Inspection of Shipment ..............................................................................................................................................5
Manual ................................................................................................................................................................................5
Model Description ........................................................................................................................................................5
Items Included with this Unit..................................................................................................................................5
Setup ...................................................................................................................................................................................6
Electrical Requirements ............................................................................................................................................7
Before You Plug In Machine .....................................................................................................................................7
OPERATING INSTRUCTIONS .................................................................................................................... 8
Controls and Their Functions .................................................................................................................................8
Popping Corn Instructions ................................................................................................................. 9
Care and Cleaning ............................................................................................................................... 10
Daily Kettle Cleaning Instructions ..................................................................................................................... 10
Daily Unit Cleaning Instructions ......................................................................................................................... 11
Troubleshooting ................................................................................................................................. 12
AGITATOR SET COLLAR ADJUSTMENT............................................................................................... 13
MAINTENANCE INSTRUCTIONS ............................................................................................................ 14
ORDERING SPARE PARTS....................................................................................................................... 15
Replacing Broken Glass........................................................................................................................................... 15
4 oz. Kettle Assembly (54000) – Agitator Assembly View ....................................................................... 16
4 oz. Kettle Assembly (54000) – Kettle Bottom Assembly ...................................................................... 17
Cabinet Exterior – Front View ............................................................................................................................. 18
Cabinet Exterior – Rear View ............................................................................................................................... 19
Cabinet Interior – Hanger Assembly/Controls View ................................................................................ 20
Cabinet Interior – Corn Pan/Element View .................................................................................................. 21
Dome Interior – Electrical Components ......................................................................................................... 22
Safety Labels................................................................................................................................................................. 23
Accessories.................................................................................................................................................................... 23
Wiring Diagram ................................................................................................................................... 24
WARRANTY................................................................................................................................................ 25
Page 2
gmpopcorn.com
Page 3
DANGER
DANGER
WARNING
WARNING
WARNING
WARNING
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
SAFETY PRECAUTIONS
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
008_051514
014_020416
To avoid burns, DO NOT touch the kettle or any heated surface.
DO NOT place or leave objects in contact with heated surfaces.
013_092414
ALWAYS wear safety glasses when servicing this equipment.
010_010914
No user serviceable parts inside. Refer servicing to qualified service
personnel.
011_051514
Read and understand operator’s manual and all other safety instructions
before using this equipment. To order copies of the operator’s manual go to
gmpopcorn.com or write to Gold Medal Products Co., 10700 Medallion Drive,
Cincinnati, OH 45241 USA 1-(800)-543-0862
022_060215
Page 3
gmpopcorn.com
Page 4
WARNING
WARNING
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
DO NOT allow direct contact of this equipment by the public when used in
food service locations. Only personnel trained and experienced in the
equipment operation may operate this equipment.
Carefully read all instructions before operation.
This machine is NOT to be operated by minors.
Note: Improvements are always being made to Gold Medal’s equipment. This information
may not be the latest available for your purposes. It is critical that you call Gold Medal’s
Technical Service Department at 1-800-543-0862 for any questions about your
machine operations, replacement parts, or any service questions. (Gold Medal
Products Co. does not assume any liability for injury due to careless handling and/or
reckless operation of this equipment.) General images may be used in manual for
reference only.
012_010914
007_010914
Page 4
gmpopcorn.com
Page 5
(PN 47678)
Bulb
(PN
42947
)
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
INSTALLATION INSTRUCTIONS
Inspection of Shipment
After unpacking, check thoroughly for any damage which may have occurred in transit. Claims
should be filed immediately with the transportation company. The warranty does not cover
damage that occurs in transit, or damage caused by abuse, or consequential damage due to the
operation of this machine, since it is beyond our control (reference warranty in back of manual).
Manual
Read and understand the operator’s manual and all other safety instructions before using this
equipment. To order copies of the operator’s manual go to gmpopcorn.com or write to Gold
Medal Products Co., 10700 Medallion Drive, Cincinnati, OH 45241 USA 1-(800)-543-0862.
Model Description
2404: Fun Pop 4 oz. Popper with red and gold cabinet.
2404MD: Midnight 4 oz. Popper with black and silver cabinet.
Items Included with this Unit
Scoop
(PN 2071NM)
Knob (PN 47120)
Screw (PN 42227)
(for Old Maid Pan)
Knob (PN 47120)
Magnet (PN 50013)
Screw (PN 20066)
(for Door)
Flavacol
Measure 6.5 cc
38 cc Oil Scoop
(PN 44446)
(for Cabinet Interior)
4/6 oz. Corn Measure
(PN 44445)
Page 5
gmpopcorn.com
Page 6
Kettle shown
mounted in
hanger arms.
plugged into kettle
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Setup
This unit has been tested at the factory.
1. Remove all packaging and tape prior to operation. Remove accessories and carefully
remove kettle packed in cabinet interior.
2. Place the unit on a sturdy, level base.
3. Tilt kettle and insert into hanger arms, then allow kettle to return naturally to an
upright position (see image below).
4. Plug kettle lead into receptacle located on ceiling of cabinet interior. Align keyed or
hook shaped prong with the correct opening, then push plug all the way in and twist
or rotate to lock in place. To unplug, untwist kettle plug before attempting to pull from
receptacle.
5. Door knobs are shipped in accessories pack located inside machine. Install a door
knob with magnet on popper door; install knob with screw on the old maid pan.
6. Carefully install the light bulb (do not over-tighten) into the lamp holder located in the
cabinet interior. Ensure the unit is OFF and unplugged before installing or changing
the bulb (reference the Electrical Requirements section).
7. After setup, unit should be cleaned prior to use (see Care and Cleaning section).
Kettle lead shown
receptacle.
Page 6
gmpopcorn.com
Page 7
DANGER
CAUTION
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Electrical Requirements
The following power supply must be provided (reference unit Data Plate):
120 V~, 60 Hz
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
A certified electrician must furnish sufficient power for proper machine operation and install any
supplied receptacle. We recommend this equipment be on a dedicated and protected circuit.
Failure to wire properly will void the warranty and may result in damage to the machine. It is Gold
Medal Products Co.’s recommendation that this machine be plugged directly into a wall outlet. The
use of extension cords is not recommended due to safety concerns, and may cause sacrificed
and/or reduced performance. Make sure cord is located to prevent a trip hazard or unit upset.
008_051514
Before You Plug In Machine
1. Make sure all machine switches are OFF before plugging equipment into receptacle.
2. Make sure wall outlet can accept the grounded plugs (where applicable) on the power
supply cord.
3. The wall outlet must have the proper polarity. If in doubt, have a competent
electrician inspect the outlet and correct if necessary.
4. DO NOT use a grounded to un-grounded receptacle adapter (where applicable).
5. Install unit in a level position.
If the supply cord is damaged, it must be replaced by Gold Medal Products Co.,
its service agent or similarly qualified persons in order to avoid a hazard.
039_080614
Page 7
gmpopcorn.com
Page 8
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
OPERATING INSTRUCTIONS
Controls and Their Functions
KETTLE HEAT SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the heating elements in the
popping kettle. The green switch light ON indicates there is power to the kettle heating
element.
KETTLE MOTOR SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the kettle agitator motor.
The Kettle Motor Switch MUST be ON at all times when there is popcorn (popped or unpopped) in the kettle.
LIGHTS/WARMER SWITCH
Two position, ON/OFF lighted rocker switch - supplies power to the interior cabinet light,
and heat element for the corn pan.
Kettle Heat Switch
Kettle Motor Switch
Light and Warmer Switch
Page 8
gmpopcorn.com
Page 9
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Popping Corn Instructions
This section describes instructions for popping Standard (salted) popcorn.
Amount of Popcorn and Oil
The popper is equipped with a corn, salt, and oil measure. We recommend flavored and colored
coconut oil. Popcorn popped in coconut oil stays fresh longer and does not leave black deposits in
the kettle like other oils. Use only top quality, fresh popcorn from reputable suppliers.
Kettle Size Popcorn Charge Oil Charge Flavacol (Salt)
4 oz. 4 oz. (118 ml) 1 to 1.3 oz. (30 to 38 ml)
For best results use Mega-Pop® 4 oz. premeasured pouches (Item# 2834).
Popping Standard (Salted) Popcorn
1. Turn all switches ON.
1 Teaspoon (5cc)
2. To determine when kettle is ready to pop corn (about 4 minutes), test pop three
kernels of corn in one ounce (30 ml) of popping oil. When kernels pop, kettle is ready.
3. Lift kettle lid and load Mega-Pop® premeasured popcorn and oil pouch, or pour in
popcorn and Flavacol, then add oil in premeasured amount. Close lid.
4. When corn has finished popping, gently dump the popcorn.
5. On final kettle of corn, turn Kettle Heat Switch OFF just as lids are forced open by the
popping corn. This procedure saves electricity, since kettle has plenty of heat, and helps
eliminate smoke/odor from any oil residue that remains after popping has stopped.
6. When finished popping, turn KETTLE HEAT and KETTLE MOTOR switches OFF.
NEVER LEAVE THE HEAT ON WHEN YOU ARE NOT POPPING CORN!
Page 9
gmpopcorn.com
Page 10
DANGER
WARNING
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Care and Cleaning
Machine must be properly grounded to prevent electrical shock to personnel.
DO NOT immerse in water. DO NOT clean appliance with a water jet.
Always unplug the equipment before cleaning or servicing.
To avoid serious burns, DO NOT touch the kettle while it is hot!
Good sanitation practice demands that all food preparation equipment be cleaned regularly (only
use non-toxic, food grade cleaners). A clean looking, well-kept machine is one of the best ways of
advertising your product.
025_111616
028_082715
Note: It is extremely important to follow all cleaning procedures, otherwise parts
damage and equipment failure will result. The warranty does not cover parts that
are damaged due to improper cleaning.
Daily Kettle Cleaning Instructions
CAUTION: A hot kettle will cause burns if you touch it with your hand. Allow kettle to cool
at least 1 hour before attempting to clean. DO NOT use ice or water to cool
down a hot kettle! Severe kettle damage will result!
1. When cool, wipe outside of kettle with a clean, soft cloth. DO NOT use oven cleaners or
abrasive materials as they will damage the kettle.
2. Every night, mix Gold Medal’s Heat’n Kleen solution (Item No. 2095), 2 tablespoons
per gallon of water. It is not necessary to use the entire gallon at once; only use
enough to fill the kettle 1/2 inch deep.
3. Turn kettle heat ON. When water starts to boil, turn kettle heat OFF.
4. Allow to cool at least 1 hour, then dump solution into a bucket and wipe inside of
kettle with a clean cloth. Make sure all solution goes into the bucket; do not spill any in
the interior of machine.
For an extra dirty kettle, the process may be repeated; or, after turning kettle heat
OFF, allow solution to sit in kettle overnight. The next morning, dump solution into a
bucket and wipe inside of kettle with a clean cloth.
5. With unit OFF and unplugged, wipe kettle lead cord with a clean SLIGHTLY damp cloth.
DO NOT get moisture into the kettle lead-in cord, severe damage will result.
Page 10
gmpopcorn.com
Page 11
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Daily Unit Cleaning Instructions
1. Turn machine OFF, unplug unit and allow it to cool before attempting to clean.
2. Clean all pans/accessories in order to sanitize them before each use.
3. Take a clean, SLIGHTLY damp cloth and wipe excess grease from glass and cabinet.
4. Wipe stainless steel parts with a clean cloth and cleaner designed for stainless steel,
such as Gold Medal Watchdog Stainless Cleaner (Item No. 2088).
DO NOT use oven cleaners or abrasive materials as they will damage parts of machine.
5. Clean glass panels with glass cleaner. Gold Medal Watchdog Glass Cleaner (Item No.
2588) is recommended.
Ammonia cleaners will damage plastic doors/panels. Use only non-ammonia cleaners,
such as Gold Medal Watchdog Glass Cleaner (Item No. 2588).
Page 11
gmpopcorn.com
Page 12
Issue
Possible Cause
Solution
Kettle Agitator Shaft not
A. Kettle Motor Switch
A. M
ake sure the Kettle Motor Switch is ON. If the
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Troubleshooting
Power to the Unit A. Power to the Unit A. Make sure the unit’s power cord is plugged in.
Kettle Does Not Heat A. Power to the Kettle A. Make sure kettle lead-in cord is plugged in and
twisted to lock into the kettle receptacle.
B. Kettle Heat Switch B. Have a qualified service person check the
voltage to and from the Kettle Heat Switch; if
switch is defective, replace it.
C. Heating Element C. Heating element in the kettle may be burned
out. Check with a qualified service person for
inspection/repair.
Long Popping Cycles
(Longer than 4 minutes for
Salt Popcorn)
B. Inadequate Supply Lines B. Inadequately sized electrical supply lines or
C. Inferior Corn C. Inferior quality corn would result in longer
A. Low Voltage A. If the machine is operated on low voltage, this
could cause the kettle not to reach the proper
operating temperature. Check with a qualified
electrician.
use of extension cord, in addition to being a
fire hazard, would also prevent the kettle from
reaching the proper operating temperature.
Check with a qualified electrician.
popping cycles. Use only top quality hybrid
popcorn from reputable suppliers. Even then,
if you let your corn pick up moisture or dry
out, your popping cycles will be slow.
Rotating
If the kettle agitator shaft is
not rotating, DO NOT pop
corn.
B. Kettle Agitator Shaft/Stir
Blade not rotating. (Unit
must be OFF, unplugged
and cool prior to
checking or adjusting
the agitator assembly.)
switch is ON, and the shaft is not rotating, the
switch or motor may be faulty, contact
qualified service personnel for
inspection/repair.
B. Kettles with a FLOATING Stir Rod – lift the
agitator weight and check the clearance
between the shaft and the kettle bottom; it
should be a minimum of 1/32” (thickness of a
dime). To make shaft adjustments, reference
the Agitator Set Collar Adjustment section.
Page 12
gmpopcorn.com
Page 13
Drive Motor
Block)
collar above the crossbar to hold position. Then,
Adjust clearance to
Lower Set Collar
(should set half
way up on
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Agitator Set Collar Adjustment
The following instructions describe how to properly adjust set collars on an agitator assembly
with a floating stir rod.
Steps to Adjust Set Collars
Step 1: Turn machine OFF, unplug unit, and
allow it to cool completely before attempting
to adjust the agitator height.
Step 2: Loosen the set screw in each set collar
to be adjusted.
Step 3: With the kettle mounted in the popper,
adjust the shaft so the Spur Gears are halfway
engaged, and the Needle Bearing is at least
halfway engaged in the gear block (reference
image at right).
DO NOT set spur gears at full gear contact; it
can cause binding as the kettle is dumped.
Step 4: Snug tighten only, the set screw in set
lift the agitator weight and check the clearance
between the shaft and the kettle bottom. If
there is adequate clearance, fully tighten the set
screw to secure set collar in place.
Step 5: Adjust clearance between the bottom of
the crossbar and the lower set collar to 1/32”
(thickness of a dime); then re-tighten set screw
to secure in place (reference image).
Gear Block
Needle Bearing
(should set at least
halfway into Gear
Agitator’s Spur Gear
Drive Motor Spur Gear)
Spur Gear Placement
Agitator Shaft
Spur Gear
Set Collar
w/Set screw
Step 6: Adjust set collar for agitator weight to
be between 3/16” to 1/4” above the agitator
weight. Once adjusted,
re-tighten set screw
to secure in place.
Agitator shown for general
image reference only (lids
not shown for clarity).
thickness of a dime.
3/16” to 1/4” max.
Page 13
Set Collar above Crossbar
Crossbar
(below Crossbar)
Set Collar
(for Agitator Weight)
Agitator Weight
Stir Rod
gmpopcorn.com
Page 14
DANGER
DANGER
WARNING
CAUTION
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
MAINTENANCE INSTRUCTIONS
Machine must be properly grounded to prevent electrical shock to personnel.
Failure to do so could result in serious injury, or death.
DO NOT immerse any part of this equipment in water.
DO NOT use excessive water when cleaning.
Keep cord and plug off the ground and away from moisture.
Always unplug the equipment before cleaning or servicing.
Make sure all machine switches are in the OFF position before plugging the
equipment into the receptacle.
Improper installation, adjustment, alteration, service, or maintenance can
cause property damage, injury, or death. Any alterations to this equipment
will void the warranty and may cause a dangerous condition. This appliance
is not intended to be operated by means of an external timer or separate
remote-control system. NEVER make alterations to this equipment. Read the
Installation, Operating, and Maintenance Instructions thoroughly before
installing, servicing, or operating this equipment.
008_051514
014_020416
No user serviceable parts inside. Refer servicing to qualified service
personnel.
THE FOLLOWING SECTIONS OF THIS MANUAL ARE INTENDED ONLY
FOR QUALIFIED SERVICE PERSONNEL WHO ARE FAMILIAR WITH
ELECTRICAL EQUIPMENT. THESE ARE NOT INTENDED FOR THE
OPERATOR.
011_051514
027_010914
Page 14
gmpopcorn.com
Page 15
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
ORDERING SPARE PARTS
1. Identify the needed part by checking it against the photos, illustrations, and/or
parts list. (General images may be used in manual for reference only.)
2. Use only approved replacement parts when servicing this unit.
3. When ordering, please include part number, part name, and quantity needed.
4. Please include your model number, serial number, and date of manufacture (located
on the machine nameplate/data plate) with your order.
5. Address all parts orders to Parts Department, Gold Medal Products Co., 10700
Medallion Drive, Cincinnati, Ohio 45241-4807
or place orders by phone or online:
Phone: (800) 543-0862
(513) 769-7676
Fax: (800) 542-1496
(513) 769-8500
E-mail: info@gmpopcorn.com
Web Page: gmpopcorn.com
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS (Height x Width x Thickness)
Front and Side Glass: 18.25” x 14.51” x .127” (3 Pieces)
1. Turn machine OFF, unplug unit and allow it to cool before attempting to replace glass.
2. Remove all loose pieces of glass (kettle may be removed to change glass.)
3. Place a bungee (or large rubber band) around the unit to help hold corner posts in
place, then remove dome.
4. Remove all rigid glass channels from around glass to be replaced, set channels aside
for reuse.
5. Carefully remove the rest of the broken glass.
6. Apply decals (if desired) to new glass panel.
7. Slide rigid glass channels over exposed edges of new glass panel.
8. Slide new glass panel into machine.
9. Reattach dome, then remove bungee (reinstall kettle, if removed).
Page 15
gmpopcorn.com
Page 16
17
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
4 oz. Kettle Assembly (54000) – Agitator Assembly View
1
1
2
7
8 9 10
**Apply Loctite 246 to
8
bottom of set screws
before installing.
6**
3
4
See Kettle
Bottom
Assembly.
Complete Kettle Assembly
Item
1 ACORN NUT 47702
2 8-32 X 1/2 PHIL PAN M/S 47141
3 DUMP HANDLE RH 49314
4 DUMP HANDLE KNOB 47110
5 SPACER (for Dump Handle) 49362
6 8-32 X 1” SET SCREW 77933
7 AGITATOR & LID ASSY (Complete Assembly) 54407
8 KETTLE CROSSBAR ASSEMBLY 46779
9 FRONT LID W/FORMED LIFTER 55074
10 REAR KETTLE LID 55073
11 RETAINING RING 49701
12 NEEDLE BEARING 47106
SPUR GEAR KIT (Includes 2 gears with set
13*
screws. Always replace Agitator Spur Gear and
Kettle Drive Motor Gear as a set.)
14 SET SCREW #10-32 X 3/16 41742
15 4 OZ KETTLE AGITATOR SHAFT 54007
16 SET COLLAR 5/16 ID 5/8 OD 46649
17 4 OZ STIR ROD 54030
18 AGITATOR WEIGHT 49013
Complete Agitator Assembly (Includes Lids)
Part Description
15
16, 14
Part Number
5
54000
47059K
11
12
13*
14
*See Parts
List note.
18
Page 16
gmpopcorn.com
Page 17
General image
.
8 6
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
4 oz. Kettle Assembly (54000) – Kettle Bottom Assembly
7
1
4
3
2
shown for reference
Item
1 4 OZ. KETTLE SHELL 54004
2 4 OZ. KETTLE LEAD ASSEMBLY 54028
3 4 OZ. KETTLE GASKET 54003
4 4 OZ. KETTLE/HEAT ELEMENT 54027
5 8-32 TOP LOCK NUT (always replace if removed)
6 450°F THERMOSTAT (includes two 6-32 screws)
7 THERMOSTAT SHUNT BAR 47193
8 525°F THERMOSTAT (includes two 6-32 screws)
Lock Nut View
Part Description
Thermostat
Welded Stud
Part Number
54000
67943
76089
76702
Top Lock Nut - Fastens
5
each thermostat and
ground. Install Lock Nut
with triangle in UP
position (as shown).
ONE TIME USE ONLY,
REPLACE NUT if
removed.
Page 17
gmpopcorn.com
Page 18
6 BASE PAN
55063
55063BK
See Kettle
Metric Screw
Metric Screw
See Replacing
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Cabinet Exterior – Front View
2
1
Assembly
section.
#7 x 1/2”
#7 x 1/2”
3
Glass section.
5
4
8, 9, 10
General image shown for parts reference only.
Item
1 DECAL POPCORN FRONT GLASS 56001 56001MD
2 DOME TOP WELDED ASSEMBLY 55089 55089BK
3 DOME COVER 55101 55101BK
GLASS CHAN 18.226 (used for top and bottom
4
edges of glass panels – cut as needed)
5 GLASS 4 OZ POPPER (3 panels used) 50022 50022
7 8-32 X 5/8 TYPE 23 HX HD (fastens base pan) 49052 49052
8 RUBBER BUMPER/FOOT 87247 87247
9 #8 INTERAL TOOTH WASHER 12132 12132
10 #8-32 STAINLESS HEX NUT (fastens foot) 89129 89129
Part Description
6
7
Part Number
2404 2404MD
55079 55079
Page 18
gmpopcorn.com
Page 19
avoid a hazard.
General image shown for parts reference only.
11 10
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Cabinet Exterior – Rear View
1
*CAUTION: If supply cord is
damaged, it must be replaced
by Gold Medal Products Co.,
its service agent, or similarly
qualified persons in order to
2
3
4
Item
1 TOP HINGE DOOR PIVOT BRACKET 55060
DOOR ASSEMBLY (includes door, hinge
2
extrusion, and pins)
3 BOTTOM HINGE DOOR PIVOT BRACKET 55061
4 DROP PANEL 4 OZ POPPER 55065
5 KNOB 47120
6 8-32 X 3/8 PH PAN W/SEMS (screw for knob) 42227
7 OLD MAID PAN 49100
8 SR-6P3-4 STRAIN RELIEF 76026
9* LEAD-IN CORD 15 AMP PLUG 22038
10 MAGNET 50013
11 8-32X1/2 FL HD PH MS (screw for knob) 20066
12 LATCH CATCH 55104
5, 6 7
Part Description
12
5
8 9*
Data Plate
For Labels, see Safety Label Section.
Part Number
2404,
2404MD
56011
Page 19
gmpopcorn.com
Page 20
See Kettle Assembly
section for Kettle
*See Parts
General image shown for parts reference only.
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Cabinet Interior – Hanger Assembly/Controls View
1
3 2
4
5
10
9
7*, 8
Item
1 SWITCH MOUNT 55076
2 SWITCH MOUNT DECAL 44070
3 DPST ROCKER SWITCH 42532
4 50 W FLOOD LIGHT COATED 42947
5 HANGER ARM REAR 4 OZ POPPER 55071
6 HANGER ARM FT 4 OZ POPPER 55070
SPUR GEAR KIT (Includes 2 gears with set
7*
screws. Always replace Agitator Spur Gear and
Kettle Drive Motor Gear as a set.)
8 10-32” X 3/16” SET SCREW 41742
9 GEAR BLK 4OZ ALUM DIE CST 55098A
10 L5-15R 15A RECEPTACLE 49330
6
parts breakdown.
Part Description
List note.
For Labels,
see Safety
Label Section.
Part Number
2404,
2404MD
47059K
Page 20
gmpopcorn.com
Page 21
3
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Cabinet Interior – Corn Pan/Element View
1
General image shown for parts reference only.
Item
WIRE ROUTE COVER
1
(runs the entire length of the corner post)
2 CORN PAN 4 OZ POPPER 55069
3 20 WATT 120V FOIL HEATER 40557
Part Description
2
Adhesive backed, foil element
adheres to underside of corn pan.
Part Number
2404,
2404MD
55077
Page 21
gmpopcorn.com
Page 22
General image shown for parts reference only.
S
ee
Cabinet Interior
–
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Dome Interior – Electrical Components
1
4
3
Item
1 LITE CONE AND SOCKET ASSEMBLY 56070
2 L5-15R 15A RECEPTACLE 49330
3 120V KETTLE DRIVE MOTOR 49045
4 8-32 X 5/8 TYPE 23 HX HD 49052
Part Description
2
Controls View.
Part Number
2404,
2404MD
Page 22
gmpopcorn.com
Page 23
1
3 1 4
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Safety Labels
2
5
Unit Labels
Accessories
3
4
Kettle Lead-In Label
6
Power Cord Label
Item
1 UNIVERSAL POPPER DECAL 41019
2 LABEL - MAX WATT COATED 44948
3 MAIN GROUND LABEL 42375
4 WARNING, SURFACE CONTACT 87087
5 CONDUIT WARNING LABEL 82840
6 WARNING LABEL CORD 68720
Part Description
Part Number
All Models
2
Item
1 SCOOP 2071NM
2 MEASURE 6.5CC 47678
3 OIL SCOOP 38 CC 2404 44446
4 4/6 OZ CORN MEAS CUP 44445
Part Description
Part Number
All Models
Page 23
gmpopcorn.com
Page 24
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
Wiring Diagram
Model No. 2404 and 2404MD
Page 24
gmpopcorn.com
Page 25
Fun Pop 4 oz. Popper Model Series: 2404, 2404MD
WARRANTY
WARRANTY
Gold Medal Products Co. warrants to the original purchaser each item of its manufacture to
be free of defects in workmanship and material under normal use and service. Gold Medal
Products Co.’s obligation under this warranty is limited solely to repairing or replacing parts,
f.o.b. Cincinnati, Ohio, which in its judgment are defective in workmanship or material and
which are returned, freight prepaid, to its Cincinnati, Ohio factory or other designated point.
Except for “Perishable Parts” on specific machines, the above warranty applies for a period
of two (2) years from the date of original sale to the original purchaser of equipment when
recommended operating instructions and maintenance procedures have been followed. These
are packed with the machine. Parts warranty is two (2) years, labor is six (6) months.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, AND OF ALL OTHER OBLIGATIONS OR LIABILITIES ON OUR PART,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. THERE ARE
NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF. In no event shall Gold Medal Products Co. be liable for special, incidental or
consequential damages. No claim under this warranty will be honored if the equipment covered
has been misused, neglected, damaged in transit, or has been tampered with or changed in any
way. No claim under this warranty shall be honored in the event that components in the unit at
the time of the claim were not supplied or approved by Gold Medal Products Co. This warranty
is effective only when electrical items have been properly attached to city utility lines only at
proper voltages. This warranty is not transferable without the written consent of Gold Medal
Products Co.
The term “Original Purchaser” as used in this warranty shall be deemed to mean that person,
firm, association, or corporation who was billed by the GOLD MEDAL PRODUCTS CO.,
or their authorized distributor for the equipment.
THIS WARRANTY HAS NO EFFECT AND IS VOID UNLESS THE ORIGINAL
PURCHASER FIRST CALLS GOLD MEDAL PRODUCTS CO. AT 1-800-543-0862 TO
DISCUSS WITH OUR SERVICE REPRESENTATIVE THE EQUIPMENT PROBLEM,
AND, IF NECESSARY, FOR INSTRUCTIONS CONCERNING THE REPAIR OR
REPLACEMENT OF PARTS.
NOTE: This equipment is manufactured and sold for commercial use only.
10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA
gmpopcorn.com
Phone: (800) 543-0862 Fax: (800) 542-1496
(513) 769-7676 (513) 769-8500
© 2018 – The text, descriptions, graphics, layout, and other material in this publication are the exclusive property of
Gold Medal Products Co. and shall not be used, copied, reproduced, or published in any fashion, including website
display, without its express written consent.
Page 25
gmpopcorn.com
Loading...