Gold Medal 5057 User Manual
WarmaServ
a
Instruction Manual
Model #5057
Part No. 38162
Revised June 1996
Cincinnati, OH 45241-4807 USA
SAFETY PRECAUTIONS
a
WarmaServ
a
OPERATING INSTRUCTIONS
ELECTRICAL REQUIREMENTS
Standard voltage for the WarmaServ is 120 volt, 60 cycle, single phase A .C. current. Your new
unit is furnished with the proper size attachment plug for carrying this current, This unit requires a
15 amp circuit.
INST ALLATION
Remove all packing material. Position unit on a fairly level surface. Plug into a 15 amp circuit.
CARE AND CLEANING
When finished for the day , unplug the W armaServ and clean product pan and false bottom with
a soft cloth using water and a mild detergent. Using a damp cloth wipe off bottom pan, and all
exposed areas. NEVER immerse anything but product pan and false bottom in water!
REPLACING HEA T LAMPS
Unplug your machine before servicing.
1. After allowing heat lamp to cool, simply unscrew bulb from its socket.
2. Replace with heat lamp rated 250 watt, 120 volt.
1
ALL MODELS #5057
Loading...