Gold Light Toys Factory JG2017D24GR, JG2017D24GT User Manual

RC ROBOTOSAUR

Congratulations on your purchase of the RC Robotosaur. Your new friend will take you on adventures doing all kinds of
amazing things. He will protect your room too! But beware, he can get a bit cranky and tends to roar when he doesn’t
get his way! Keep this instruction manual, as it contains important information for future reference.

GO FORWARD GO BACKWARD

SPIN CLOCKWISE

SPIN COUNTERCLOCKWISE

SAFETY WARNINGS

Read all safety warnings before use.

•

Use this product only for its intended purpose.

•

This product has no user serviceable components. Do

•

not disassemble.
Inspect the product before every use. If the product appears

•

damaged in any manner, discontinue use and discard.
For indoor use only.

•

CONTENTS

ROBOTOSAUR

NOTE: Images not to scale.

REMOTE

CHARGING YOUR ROBOTOSAUR

Your Robotosaur has a 3.7v 500 mAh rechargeable
internal lithium battery. Although it comes with some
charge, you need to charge it 60 minutes before use.

1. Plug the included custom USB cable into the tail port and
then to a device (laptop) or adapter for a wall outlet.

2. When the red light on the USB turns off, it is fully charged.
Store the USB cord.

Alkaline Battery Warning:

• Do not mix old and new batteries

• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries

• Alkaline batteries are recommended. Use only the specified voltage.

• Insert batteries using the correct polarity. Always use, replace, and recharge (if

applicable) batteries under adult supervision.

• Do not charge with non-rechargeable batteries.

• Do not short-circuit the supply terminal.

• Do not dispose of batteries in fire, batteries may explode or leak.

• Remove batteries before storing.

• Recycle or dispose of batteries according to federal, state, and local laws.

CUSTOM USB CABLE

Charge Port

NOTE: Only use the included USB cable to
charge. Make sure it is OFF when charging.

ON/OFF Switch

PUSH AND HOLD BOTH
JOYSTICKS UP

SIT

TAP BOTH JOYSTICKS UP TO SIT.

HE MAY WONDER IF YOU THINK
HE’S A DOG!

STOMP

PUSH AND HOLD BOTH
JOYSTICKS DOWN

PUSH AND HOLD THE LEFT
JOYSTICK UP AND RIGHT
JOYSTICK DOWN

ATTACK ROAR HUNT

PRESS THE ATTACK BUTTON. TAP THE ROAR BUTTON.

HE TURNS HIS HEAD, ROARS, AND
SPINS AROUND LOOKING TO MAKE
TROUBLE! PET HIS NOSE ONCE TO
SOOTHE THIS SAVAGE BEAST
AND MAKE HIM HAPPY!

HE CURIOUSLY OPENS HIS MOUTH.

HOLD THE ROAR BUTTON.

NOW HE’S REALLY UPSET.
HE TURNS HIS HEAD AND ROARS!

GUARD

PUSH AND HOLD THE LEFT JOYSTICK
DOWN AND RIGHT JOYSTICK UP

PRESS THE HUNT BUTTON.

HE GOES AROUND LOOKING
FOR HIS PREY. WHEN HE FINDS
SOMETHING, HE ROARS!

COME

REMOTE BATTERY INSTALLATION

1. Unscrew and remove the battery compartment cover.

2. Install 3 “AA” 1.5V batteries (not included) as shown in
the diagram to the right.

3. Replace the cover and close battery compartment.

PLAY FEATURES/TROUBLESHOOTING

• Hold the POWER button for 3s to turn off remote.

• When red LED flashes, batteries are low. Please replace the

remote batteries for optimal performance.

• If remote is not used for 15 minutes, it will auto shut-off. Press the

POWER button again to switch back on.

• When blue LED ring on belly is flashing, Robotosaur’s

rechargeable battery is low. Please plug in using the included
USB charging cable to recharge the battery.

• If Robotosaur is awoken from SLEEP and the remote is still on,

the remote will pair automatically with Robotosaur. However, in
other disconnection situations, please turn off and on both
Robotosaur and the remote to ensure the 2 are paired.

• Robotosaur is shipped in Try-Me mode. To activate full play

mode, turn Robotosaur off and back on again.

Rechargeable Battery Warning:

• This product contains batteries that non-replaceable.

• There is a risk of fire and personal injury if battery is punctured, damaged

or misused.

• Do not dismantle, crush, incinerate or short-circuit battery.

• Never expose battery to extreme temperatures or moisture.

• Keep away from flammable materials and direct sunlight.

• Only charge using the provided charger, cable, and/or adapters.

• Rechargeable battery is only to be charged by an adult.

• Adult Supervision of the battery while it is charging is required

• Allow battery to cool to room temperature before charging.

• Charge on a non-flammable surface and keep away from flammable products

• Discontinue charging if battery becomes hot, swells, smokes, or gives off

a strong odor.

• Battery chargers used with the product are to be regularly examined for

damage to the cord, plug, enclosure, and other parts, and in the event of
such damage, they must not be used until the damage has been repaired.

• Recycle or dispose of battery according to federal, slate, and local laws

• Keep these instructions for future reference.

MAKING YOUR ROBOTOSAUR GO

Press the POWER Button on the remote and slide the tail switch ON. When the blue light on your
Robotosaur’s belly is on and his eyes are green, the remote is connected and he is ready to play.

TAP THE LEFT JOYSTICK UP AND RIGHT
JOYSTICK DOWN OR THE RIGHT JOYSTICK UP
AND LEFT JOYSTICK DOWN.

NOW YOU’VE DONE IT! HE KICKS HIS LEGS BACK
AND FORTH IN A PREHISTORIC HIGH TECH RAGE!

PRESS THE GUARD BUTTON OR PET
HIS NOSE TWICE.

HE SPINS AND LOOKS AROUND FOR
SOMETHING TO ATTACK!

FACE THE REMOTE CONTROLLER TO THE
ROBOTOSAUR AND HOLD THE COME BUTTON.

HE WILL FOLLOW YOU AROUND! PRAISE
HIM BY PETTING HIS NOSE AND HE WILL
WAG HIS TAIL IN JOY!

SNORE RECHARGE MOOD

• YOU WILL KNOW ROBOTOSAUR IS SNORING BECAUSE

HIS EYE COLOR TURNS BLUE AND HE MAKES A YAWNING
AND SNORING SOUND. ANY OPERATION FROM REMOTE
WILL WAKE HIM UP.

• IF HE SNORES FOR A LONG TIME (ABOUT 2.5 MINUTES),

HE WILL GO INTO SLEEP MODE. TOUCH HIS NOSE TO

WAKE HIM, BUT BEWARE THAT SLEEPING CAN TURN HIS

SNORE INTO A ROAR!

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not
occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged to
try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna,

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

WHEN THE BLUE LED RING ON

BELLY IS FLASHING (INSTANT
IN/OUT), IT INDICATE LOW POWER

AND NEED TO BE CHARGED

HE CAN BE VERY MOODY. HIS
EYES WILL ALWAYS TELL YOU
WHAT’S ON HIS MIND!

PATENT PENDING Printed in China

HAPPY

UPSET

HUNTING