Golden Technologies BPWARB User Manual
Power Lift & Recline Chair
OWNER’S MANUAL
AND
LIMITED LIFETIME WARRANTY
The Best Power Lift and Recline Chair Made in the USA
YOUR LIFE IN MOTION
8-02 BPWARB
Dear Valued Customer,
Thank you for purchasing this Golden Technologies Power Lift and Recline Chair. UL and CSA
certifications insure that our chairs are the
safest available. We believe that this product is
made from the highest quality components available, is engineered to give you maximum service with minimum maintenance, and is backed up with the strongest warranty in the
industry. We hope that you enjoy years of pleasurable use of
your Golden Technologies chair and that this chair becomes a
true assist to you in both sitting down and standing up.
Please take a few moments to review this manual to become
familiar with the operation of this chair and our warranty. If you
need additional information, please call the dealer from whom
you purchased this chair.
Also, please note the following safety information: This power
lift and recline chair is a piece of medical equipment designed to
help you sit down and stand up. Children should not be allowed
to operate it without adult supervision. When not in use, the
chair should be kept in the sitting position.
Again, thank you for selecting this Golden chair.
Sincerely,
Robert Golden
President
1
SAFETY INSTRUCTIONS
Your Golden power lift chair is a piece of medical equipment. Therefore,
you are required to exercise caution when operating it to ensure your
personal safety and that of others around you. The following are rules for
safe operation of your Golden Power Seat Lift Chair.
● DO NOT ALLOW CHILDREN OR PETS NEAR THE CHAIR WHILE
OPERATING.
● Make sure all obstacles are clear from under the footrest, under chair or behind
chair before reclining or descending from lift position.
● DO NOT place fingers or hands between seat cushions, and inside arm of
chair while sitting in or while chair is plugged in.
● Before retrieving fallen objects: make sure chair is in sitting position and chair
is unplugged
● DO NOT ALLOW CHILDREN TO PLAY WITH OR OPERATE THE CHAIR
AT ANY TIME.
● DO NOT ALLOW LIQUIDS TO SPILL ONTO SWITCH OR OTHER
ELECTRICAL COMPONENTS.
● DO NOT allow anyone to sit on your lap, or on the arm of the chair, or on the
footrest while operating the chair.
● Please unplug your chair BEFORE you clean or retrieve fallen objects from
under it.
● IF CHAIR DOES NOT OPERATE AND YOU CAN’T FIND THE PROBLEM,
UNPLUG THE CHAIR AND CALL YOUR DEALER FOR ASSISTANCE.
CHAIR INSTRUCTIONS
While standing next to your chair, press the lift button on the control switch to
raise the chair to a height you can sit against. This height will vary from person to
person depending on the individual’s needs or preference. When the chair is at the
desired height, lean against the chair seat and press the recline button on the control
switch. As the chair continues downward move yourself into a sitting position. Release the button on the switch when the chair is firmly set on the floor.
To recline, continue to press the recline button and lean back as chair reclines.
You can control the reclining movement with the switch by letting go of the button
when you reach the desired position.
To stand up press the lift button. If you are in a reclined position the chair will
move to a seated position, then slowly and gently begin to rise. As the chair slowly
rises gradually shift your weight forward. You can steady yourself by holding on to the
arms of the chair as it rises with you. When the chair reaches a height that enables you
to easily stand, release the switch. You may leave your chair in this position as it should be
the same height you need to lower yourself to a sitting position.
2
MAKING POWER CONNECTIONS
YOUR NEW LIFT CHAIR
IN
1. Remove AC/DC adapter (transformer) from packaging located under base of
chair.
2. Place two 9 volt alkaline batteries (not included) into the slots provided on
the underside of the adapter. Install the wire connections on each battery.
3. Locate the extension wire secured to the shaft of the lift motor beneath the
chair. Connect the female end of the wire to the power cord coming out of the
motor. Connect the male end of the wire to the transformer.
4. Make sure all connections are tight. Plug the transformer plug into a standard
wall outlet.
CHAIR LOCATION
You will want to place your chair in the room where it will be most convenient for
you, such as near the television, radio, reading light, end table, or other furniture.
Leave enough space between back of chair and wall or other obstruction to allow
chair to recline (about 14 inches). (Recline space needed may vary based on chair
model.)
Do not allow any objects to restrict movement of the footrest. Some carpets have
a high plush pile that can rub on the bottom of the footrest. This situation can
damage the mechanism. You can correct this situation by turning the levelers
(located under the front of the chair) to raise the footrest enough to clear the
carpet.
Your chair is equipped with a battery back up source. 2-9 volt batteries must be
installed. Once used, batteries must be replaced.
Keep the telephone or some means of communicating with someone within reach.
3
Loading...