GOLDEN TANDOORS GT -610AG, GT-710AG Installation & Operation Manual

GOLDEN TANDOORS

GAS TANDOOR OVEN

Installation & Operation Manual

GT -610AG & GT-710AG

This manual must be retained for future reference

FOR YOUR SAFETY

Do not store, spray or use gasoline, flammable

vapours or aerosols in the vicinity of this

appliance while it is operation.

Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation
and operator’s instructions thoroughly before
installing or servicing this equipment.

CAUTIONS

APPROVAL

NUMBER: GMK10422

ANSI / NSF STD 4

SERVICE DATA & CONTACT

GOLDEN TANDOORS

GT-610AG & GT-710AG Tandoor Oven Installaon Manual

SERVICE CONTACT

Service & Technical Support is available through Golden Tandoors Australia.
For a list of dealers visit www.goldentandoors.com.au
You may call Golden Tandoors Australia for support on [phone]
between 9:00am - 5:00pm AEST Monday - Friday. After office hours leave a
voice mail & we shall revert back to you as soon as possible.

Leave your complete phone number with serial number of the product. You
can email us for any query at [e-mail]

DISCLAIMER

Although the information and recommendations in this manual are presented in
good faith and believed to be correct, Golden Tandoors and/its parent company make
no representations or warranties as to the completeness/accuracy of the information.

Information is supplied upon the condition that the persons receiving same will make
their own determination as to its suitability for their purposes prior to use. In no
event will Golden Tandoors and/or its parent company be responsible for damages of
any nature whatsoever resulting from the use of or reliance upon information from
this site or the products to which the information refers.

Golden Tandoors and/or its parent company does not warrant the accuracy or
timeliness of the materials in this manual and has no liability for any errors or
omissions in the materials and recipes.

THIS MANUAL IS PROVIDED ON AN "AS IS" BASIS. NO REPRESENTATIONS OR
WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH
RESPECT TO INFORMATION OR THE PRODUCTS TO WHICH INFORMATION REFERS.

GAS CODE LIMITATIONS

The installation of this appliance must conform with local codes, or in the
absence of local codes, with the Australian Standard AS4563-2004 Commercial
Catering Gas Equipment (Barbeque Grillers) and AS/NZS 5601.1:2013 Gas
Installations – Part 1: General Installations, as applicable including: The
appliance and its individual shutoff valve (supplied by others) must be
disconnected from the gas supply piping system during any pressure testing of
that system at pressures in excess of ½ psi (3.45kPa).

The appliance must be isolated from the gas supply piping system by closing
its individual manual shutoff valve (supplied by others) during any pressure
testing of the gas supply piping system at test pressure, equal to or less than ½
psi (3.45kPa).

The product comes with an INSTALLATION MANUAL and an

OPERATOR’S MANUAL

READ BOTH MANUALS CAREFULLY BEFORE USING THE PRODUCT

RETAIN BOTH MANUALS FOR FUTURE REFERENCE

GOLDEN TANDOORS

GT-610710AG-2016V1-E

WARNING

Improper installation, adjustment,

alteration, service or maintenance can

cause property damage, or serious injury.

Read the installation, operating

and maintenance instructions thoroughly

before use, installing or servicing this

equipment.

Note: The information contained herein is confidential and is the property of the manufacturer.
It is not to be disclosed, disseminated or used except for the purpose for which it is provided.

Contents

Gas Specifications 1

Minimum Clearances 2

Ventilation Requirements 3

Specifications 4

Unpacking 5

Site Requirements 6

Installation Procedures 7

Operation Procedure 8

First Burning 9

Maintenance 10

Troubleshooting 12

Technical Service Contact 13

GT-610AG & GT-710AG Tandoor Oven Installation & Operation Manual

GOLDEN TANDOORS

GT-610AG & GT-710AG Tandoor Oven Installation & Operation Manual

GAS SPECIFICATIONS

GT-610710AG-2016V1-E

1

Gas Inlet

BOTTOM VIEW

Gas Inlet Locaon

Control Box

Towel Hanger

Rear

Clearance

Bumper

Locking Castor
Height Adjustable

GOLDEN TANDOORS

GT-610AG & GT-710AG Tandoor Oven Installation & Operation Manual

MINIMUM CLEARANCES

GT-610710AG-2016V1-E

2

Dimensions

Rear Bumper LHS + RHS

110mm Clearance

DO NOT REMOVE

Gas Inlet

SIDE VIEW

TOP VIEW

FRONT VIEW

BOTTOM VIEW

Model

Width (mm)

W

Depth (mm)

D

Height (mm) H Mouth Opening (mm)

M

Weight (Kg)

GT-610AG 610 610 740 315 190

GT-710AG

710 710 740 345 250

GOLDEN TANDOORS

GT-610710AG-2016V1-E

Clearance Requirements

GT-610AG & GT-710AG Tandoor Oven Installation & Operation Manual

Ventilation Requirements

3

SIDE VIEW OF GAS TANDOOR

Diagram not to scale, descriptive only

Gas Hose Restraint

The oven is mounted on

castors, commercial flexible

hose with a minimum of
3/4” (1.9cm) must be used
along with a quick connect

device. (Not supplied with

the product)

The restraint supplied with

the Tandoor oven must be

used to limit the movement

of the unit so that no strain

is placed upon the flexible
connector. With the restraint
fully stretched the connector

should be easy to install and

quick connect.

The restraint should be
attached without damaging
the building. Do not use gas

piping or electrical conduit

for the attachment of the

permanent end of the

restraint. Use anchor bolts in

concrete or cement block. If

you have a wooden wall do
not use the tandoor near it
as the tandoor must not be

used near combustible

surfaces or materials

including walls.

Warning !!

If the restraint is disconnected for
any reason it must be reconnected
when the oven is returned to its
original position.

1350mm Clearance minimum required from top of burner to
bottom of canopy filter as per AS/NZS Standards.

Ensure left to right minimum clearance of 300mm from wall or any
other objects.

NOTE: Appliance must be located on Fire Proof Base

WARNING: Avoid locating Tandoor next to solid fuel, stoves, ovens,
or grills.

Installation Requirements

Installer to observe the following standards:

1. Increase minimums to 600mm if butted up close to glass
windows, mirrors or display equipment, etc.

2. Kitchen Exhaust Canopy in accordance with AS/NZS 1668 Parts 1
& 2

3. Gas Installation Standard AS/NZS 5601

4. Relevant Authorities (Council, Building, Health, etc.)

Fire Proof Floor

TOP VENTILATION

SIDE VIEW OF GAS TANDOOR

1350mm

110MM

FRONT VIEW OF GAS TANDOOR

300MM300MM

TOP VENTILATION