Golden Lighting 7509-BA3 PW User Manual

Company Name:_______________________Co. Account #:___________

below to be filled out by retailer

Read and review installation instruction sheet

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are

Fixture Name: Asteria 7509-BA3 PW

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.

PARTS LIST

Mounting Strap

1ea 4"X3" 2ea 8/32"X1" 2ea 8/32"X28mm

Wire
Connnector

3ea P3 Orange 2ea 8/32"X3.5mm 2ea 9X9.5mm

Green Ground
Screw

1ea 8/32"X10mm

Part Needed Quantity
Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments

Junction Box
Screw

Hex Nut

Bulb

3ea G9*40W

Mounting Screw

Deco Nut
(round nut)

FIXTURE ASSEMBLY INSTRUCTIONS

before assembling the fixture.

7509-BA3 PW

1.Pour Crystals (Y) into the groove of Glass Shade (O). Then,
gently slide Glass Shade (O) over the socket and secure Glass
Shade (O) by threading Socket Ring (L) over the socket.

2. Thread the Final Cap (R) into Bath Bar (S) unitl tighted.

3. Install the provided light bulb in accordance with the fixture's
specifications. Bulb note: Use a tissue or paper towel to hold
the bulb and push down into the socket. Oils or dirt can cause
the bulb life to shorten. Rubbing alcohol is recommended to
clean the bulbs if dirty.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

Fig. 1

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

For Customer Service, contact t he place of purchase to arrange for replacement parts.

`