Golden Lighting 2073-1W GMT User Manual

For Customer Service, contact the place of purchase to arrange for replacement parts.

This fixture assembled PO: Date:

Fixture Name: SMYTH 2073-1W G MT

Notice: Please review the Parts List and check for all parts before assembling the fixture. If any

damaged, please note on this sheet and contact the place of purchase

to arrange for replacement parts.

Company Name:_____________ Co Account#:__________
below to be filled out by retailer

Green Screw
G8/32*H8

Hex Nut
G5/32*H4

2073-1W

Fig.1

A

B

C

parts are missing or

PARTS LIST

PART S & ASSEMBLY SHEET

Mounting Strap
Φ102 ㎜ 1ea

Wire Connectors
Orange 3ea

Tube

Φ22*50mm 1ea

㎜ 1ea

㎜ 2ea

Mounting Screws
H32㎜ 2ea H38㎜2ea

Deco Nut
Φ12 ㎜ 2ea

Part Needed ______________________________ Quantity _________________________________
Part Needed ______________________________ Quantity _________________________________
Reason why (m issing, scratched, broken glass, bent, bad f inish)
Comments __________________________________________________________________________

FIXTURE ASSEMBL Y INSTRUCTIONS

Read and review installation instruction sheet
before assembling the fixture

1. Place Tube (B) over the Threaded Socket (A).

2. Hold Glass Shade(C) over Tube(B) and
Threaded socket(A)

3. Install the light bulbs in accordance with the
fixture's s p ecification.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

NOTE: INSTALL THE GLASS ASSEMBLY

AFTER FIXTURE IS HUNG

2073-1W GMT PARTS AND ASSEMBLY SHEET

F For Customer Service, contact the place of purchase to arrange for replacement parts.

INSTALLATION INSTRUCTIONS

Fixture Name: SMYTH 2073-1W GMT

For Wall Mount Light Fixture

HANGING THE FIXTURE (Fig.1)

Fig. 1

Fig.2

Fig.3

JUNCTION BOX

D

B A C

FIXTURE WIRES

SMOOTH
(

RIBBED
(

BARE COPPER
(Or Green)

HOUSE WIRES

BLACK

(Hot)

WHITE

(Neutral)

GREEN

(Ground)

JUNCTION BOX

D E C

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

1. Carefully remove the n ew fixt ure from the carton

and the yellow parts bag. Check that all parts are
included a s s h own in the illustrations and the Parts
and Assembly Sheet.

2. Shut off power at the circuit b reaker and remove

the old fixt u r e from wall, including t he old
mounting strap.

3. Mounting Strap (A) contains several pairs of

threaded holes. Find the pair of holes that matches
the spacing of the holes in your Fixture Back Plate
(D) and thread the Fixture Mo u nt i n g Screws (C)
half way into the Fixture Mounting Strap (A).

4. Place the Mounting St rap (A) over the Junction

Box so the Fixture Mounting Screws (C) are vertical
or horizontal, as requi red by the fixture type.

5. Attach the Fixture Mounting Strap (A) to the

Junction Box using Mounting Screws (B). Tighten
the screws securely with a screw driver.

CONNECTING THE WIR E S (Fig.2)

6. Attach the power supply wires to the fixture lead

wires by connecting BLACK to BLACK (or SMOOTH)
and WHITE to WHITE (or RIBBED).

7. Ground Wire Connection: Connect the fixture

ground wire to the supply ground wire (this usually
has green insulation) with wire co nn ecto r. If there is
no supply ground wire at ceiling junction box then
attach the fixture ground wire secure ly onto green
grounding screw located at mo unt in g bar.

NOTE: Twist the wires together in the same direction
you twisted the wire connector onto the wires.

8. Tuck these wire connections neatly into the

Junction Box.

FINISHING THE INSTALLATION (Fig.3)

9. Place the fixture Back Plate (D) over the two

Mounting Screws (C) and secure the Ba ck P late
(D) against the wall by threading Deco Nuts (E)
over the Mounting Scr ew s (C) until tight.

10. Install the glass as per the Parts and Assembly

Sheet.

YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.

Or Black)

Or White)

2073-1W GMT INSTALLATION INSTRUCTIONS PART 1