Page 1
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Chain
Threaded Ring (H)
Spring Washer (B)
Crystal (K)
Glass (P)
Candle Sleeve (O)
Read and review installation instruction sheet before
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fixture Name: Valencia 2049-SF FB
Notice: Please review the parts listing and check for all pa rts before as sembling the fixture. If any parts are miss ing or
damaged, please note on this s heet a nd c ontac t the place of purchase to arrange for replacement parts.
PARTS LIST
Canopy
Hex Nut (A)
Nipple (C)
1ea 5.2"DIA*1.1"
1 ea 6FT*Φ4.2mm
Chain Connector
2 ea Φ4*H55mm
Mounting Strap (D)
1 ea 3/4"*1"
Top Loop (J)
1 ea W42*H53mm
2 ea W21*63Lmm
Part Needed Quantity
2ea 3/8"*H3mm
1ea Φ23-16T*H5mm
Screw Collar Loop (F)
1ea 3/8"*H42.4mm
Green Ground Screw
1 ea #8-32N*H10mm
Deco Nut (Round) (M)
6ea 5/32"*H9mm
4 ea W305*H145mm
1ea 3/8"*H45mm
1ea Φ15*H3mm
Junction Box Screw (E)
2 ea #8-32N*H32mm
Wire Connectors
3 ea P3
Mounting Screw
2 ea 5/32"*H28mm
4 ea W22xH105mm
FIXTURE ASSEMBLY
assembling the fixture.
I
NSTRUCTIONS
2049-SF FB
Fig. 1
ASSEMBLING THE FIXTURE
1. Slide the glass panels (P) into the fixture cage
(N), then secure with clips.
NOTE: INSTALL THE GLASS ASSEMBLY BEFORE
THE FIXTURE IS HUNG.
Page 2
PARTS & ASSEMBLY SHEET
G
CHAIN
H
F
E
K
L
M
N
K
O
P
J
L
M
N
K
O
P
Fixture Name: Valencia 2049-SF FB
ASSEMBLING THE FIXTURE as semi-flush (Fig. 2)
2. Slide the Candle sleeves (O) on threaded socket.
3. Install the light bulbs in accordance with the fixture's
specifications.
4. Lower the fixture over the glass cage, use the round
Deco nuts (K) to secure arms (M) to the cage (N).
5. Then hang the Crystals (L).
ASSEMBLING THE FIXTURE as pendant (Fig. 3)
2. Slide the Candle sleeves (O) on threaded socket.
3. Install the light bulbs in accordance with the fixture's
specifications.
4. Remove Top Cap from fixture, then screw the Top
loop (J) to the center column unt il t ight.
5. Lower the fixture ov er the glass cage, use the round
Deco nuts (K) to secure arms (M) to the cage (N).
6, Then hang the Crystals (K).
7. By measuring determine correct number of links
needed for proper hanging height. Use a pair of pliers
to open one link of the Chain then remove the excess
Chain and discard it.
8. Use one chain connector to attach one end of the
chain to the Top loop (J) and close the chain
connector.
9. Feed the fixture wires thr ough the Chain (every three
links) and pull the wires until t aut .
10. Slip Canopy loop collar over the chain, then do the
same with the canopy.
11. When ready to complete the installation Use the
other chain connector and attach the other end of the
chain to the canopy loop and close the chain
connector.
12. Make sure the weight of t he chandelier is
supported by the chain-not the electrical wire.
*You may now hang the fixture
DO NOT EXCEED MAXIM UM WATTA GE RATING!
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig 2
Fig 3
Page 3
INSTALLATION INSTRUCTIONS
included as shown in the illustration and parts list.
and over the Mounting Screws (A), adjust t he fixture Top cap
Fig. 1
Fig. 2
Fig. 3
HOUSE WIRES
WHITE
BLACK
RIBBED (WHITE)
SMOOTH (BLACK)
FIXTURE WIRES
FIXTURE WIRES
HOUSE WIRES
A
D
C
JUNCTI
(CEILIN
B
F
E
K
L
M
N
K
O
P
E
Fixture Name: Valencia 2049-SF FB
For Semi-flush Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and the
yellow bag that holds all your parts. Check that all parts are
2. Shut off power at the circuit breaker and remove the old
fixture from wall, including the old mounting strap.
3. Thread the two fixture Mounting Screws (A) into t he
predrilled holes in the Mounting Strap (B) spaced the
same distance apart as the holes in the fixture Top cap (E).
Secure in place with the Hex Nuts (D).
4. Take this mounting strap assembly and mount to ceiling
junction box with Mounting screws (C). Tighten screws
securely with screw driver.
JUNCTION
BOX
CONNECTING THE WIRES (Fig. 2)
5. Attach the power supply wires to t he fixture lead w ires by
connecting BLACK to BLACK (or SMOOTH) and WHITE to
WHITE (or RIBBED).
6. Ground wire connection: Connect fixture ground wire to
supply ground wire (usually with green insulation) with wire
connector. If there is no supply ground wire at ceiling juction
box then attach fixture ground wire securely onto green
grounding screw located at mounting bar.
NOTE:
twist the wire connector onto the wires.
Twist the wires together in the same direction you
7. Tuck these wire connections neatly into the Junction Box.
FINISHING THE INSTALLATION (Fig. 3)
8. .Place the fixture’s canopy over the Mounting Str ap ( B)
(E) until the Mounting Screws (A) protrude out from the
canopy (E) and secure the fixture against the ceiling by
threading the decorative nuts (K) until tight.
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX AND TEST
THE FIXTURE.
For Customer Service, contact the place of purchase to arrange for replacement parts.
Page 4
INSTALLATION INSTRUCTIONS
Fig. 2
BARE COPPER
GREEN
(Ground)
FIXTURE WIRES
SMOOTH ( or BLACK)
RIBBED ( or WHITE)
BLACK
(Hot)
WHITE
(Netural)
HOUSE WIRES
G
CHAIN
J
H
F
E
D
JUNCTION BOX
(CEILING)
A
C
B
Fixture Name: Valencia 2049-4P/6/9/M1L FB
For Pendant Light Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixtur e from the carton and
the yellow bag that holds all par t s. Check that all parts
are included as shown in t he illustrat ion and parts list.
2. Shut off the power at the circuit breaker and remove
old fixture from ceiling, including the old mounting strap.
3. Thread Nipple(C) into Canopy Loop (F) until snug.
4. Thread other end of the Nipple (C) with Canopy Loop
attached into Mounting Strap (D).
5. Place Lock Washer (B) over end of Nipple (C)
protruding through Mounting Strap (D) and thread Hex
Nuts (A) onto Nipple until tight.
6. Take this mounting strap assembly and mount to
ceiling junction box with Mounting screws (E). Tighten
screw securely with screw dr iver.
7. Unscrew the Canopy loop collar( H ) from the
Canopy loop. Take the canopy and pass over the
Canopy loop. approximately one half of the canopy loop
exterior threads should be exposed. Adjust until desired
height is reached. *the Canopy loop collar should fit
snugly on the Canopy loop after t he c anopy is installed.
Remove Canopy and Canopy lock collar.
8. Assemble the fixture and have an assistant or secure
support hold the weight of the fixture while you complete
the wiring connections.
9.Thread the fixture wires and ground wire of the
assembled fixture through the canopy loop and nipple
and into the outlet box.
CONNECTING THE WIRES (Fig 2)
10. Attach the power supply wires to the fixture
wires by connecting BLACK to BLACK (or SMOOTH)
and WHITE to WHITE (or RIBBED).
11. Attach the GROUND wire(GREEN or COPPER)
from the Junction Box and t he fixtur e Ground wire to the
green Ground Screw on t he M ount ing Bracket (D) or
connect both wires together using the correct size of
wire connectors.
NOTE: Twist the wires together in t he same direction
you twist the wire connector onto the wires.
12. Tuck these wire connections neatly into the
Junction Box.
FINISHING T HE INSTALLAT ION
13. Raise the Canopy (G) to t he ceiling. Secure in
place by tightening the Canopy Loop Collar (H) onto the
Canopy Loop (F).
Fig. 1
lead
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX AND
TEST THE FIXTURE.
For Customer Servic e, contact the place of purchase to arrange for re placement parts.
Loading...