Golden Lighting 1030-FM CH User Manual
PARTS & ASSEMBLY SHEET
A
Fixture Name: Cerchi 1030-FM CH
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
Company Name:_______________________Co. Account #:_____________
PARTS LIST
to be filled out by retailer
Circular
mounting strap
Mounting screw 2ea Hex nut 2ea Diffuser
Junction Box
Screw
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
1ea Wire connectors 3ea
2ea Deco nut 2ea Finial 1ea
Green ground
screw
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
SSEMBLING THE FIXTURE (Fig.1)
1. Slide Shade (H) through Fixture Connector (G) and
secure Shade (H) to Frame (L) with Screws (K) .
Note: Complete these remaining steps after the fixture is
hung.
2. Install the light bulbs in accordance with the fixture's
specifications.
3. Slide Diffuser ( I ) to Shade (H) and secure in place by
threading Bottom Finial (J) to the Fixture connector (G).
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
Fig 1
K
1030-FM CH
F
G
1ea
1ea
B
C
D
E
L
H
I
NOTE: INSTALL THE DIFFUSER AFTER THE
FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
J
INSTALLATION INSTRUCTIONS
Fixture Name: Cerchi 1030-FM CH
For Flush Mount Light Fixture
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
HANGING THE FIXTURE (Fig.1)
1.Carefully remove the new fixture from the carton and the
yellow bag that holes all your parts. Check that all parts are
included as shown in the illustration and parts list.
2. Shut off power at the circuit breaker and remove the old
fixture from ceiling, including the old mounting strap.
3. Thread the two fixture Mounting screws (A) into the predrilled Holes in the Mounting strap (B) spaced the same
distance apart as the holes in the fixture top cap. Secure in
place with Hex nuts.
4. Attach Mounting Strap (B) to the junction box using the
two Mounting Screws (C)
CONNECTING THE WIRES (Fig 2)
5. Attach the power supply wires to the fixture lead wires by
connecting BLACK to BLACK (or SMOOTH) and WHITE
to WHITE (or RIBBED).
6. Attach the GROUND wire(GREEN or COPPER) from
the Junction Box and the fixture Ground wire to the green
Ground Screw on the Mounting Bracket (B) or connect both
wires together using the correct size of wire connectors.
NOTE: Twist the wires together in the same direction you
Fig. 1
Fig. 2
FIXTURE WIRES
SMOOTH (BLACK)
JUNCTION BOX
(CEILING)
A
B
C
D
F
HOUSE WIRES
BLACK
WHITE
RIBBED (WHITE)
BARE COPPER
(Ground)
GREEN
(Ground)
twist the wire connector onto the wires.
7. Tuck these wire connections neatly into the Junction Box.
FINISHING THE INSTALLATION (Fig.3)
8. Raise Fixture top cap (E) to the ceiling with the fixture
Mounting screws (A - Fig. 1) protruding through holes and
secure in place with Deco nuts (F).
9. Install the light bulbs and diffuser as per the fixture
assembly sheet.
YOUR INSTALLATION IS NOW COMPLETE. RETURN
POWER TO THE JUNCTION BOX AND TEST THE FIXTURE.
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fig. 3
K
F
E
L
G
H
Loading...