golden interstar XPEED LX2 Instruction Manual

Instruction Manual

High Definition Personal

Video Recorder Digital

Satellite Receiver

The XPEED LX2digital receiver is fully compliant with the international
Digital Video Broad

-casting (DVB) standard, and thus is able to receive

digital broadcasts of that standard.

1 Contents

Contents

1 Introduction ....................................................................................................................... 5

1.1 Main Features ........................................................................................................... 5

1.2 Product Descriptions ................................................................................................ 6

1.3 Remote Controller .................................................................................................... 8

1.4 Conditional Access ................................................................................................... 9

1.5 Technical Specificati ons ......................................................................................... 10

2 Installation of XPEED LX2 .............................................................................................. 12

2.1 Connecting Satellite Cable ..................................................................................... 12

2.2 Connecting the TV .................................................................................................. 13

2.3 Connecting Power .................................................................................................. 14

2.4 Power On/Off .......................................................................................................... 15

3 First Time Installation ..................................................................................................... 16

Safety Instructions ii

Safety Precautions

This product has been manufactured to act in accordance with the international safety
standards. Please read through the safety instructions carefully before using this product as the
manufacturer takes no responsibility for any damages due to the consumer’s misuse of the
product.

1. Power Supply

• Use this product with the type of power supply that is indicat ed on the marking label. Its
operating range is AC 90V~250V and 50/60Hz.

• Use an outlet that has surge suppression or ground fault prot ection.

• Do not overload a wall outlet, extension cord or adapt er as t his may result in electric fire

or shock.

• Do not alter, bend, or t wist the power cord or plug.

• Be sure to route the power supply cords so that they won’t be walked on or pinched by

items around it.

• Keep the power cord away from any heating appliances to avoid melting the cover vinyl.

• If the cord is damaged, do not plug in the product and be sur e t o get the cord replaced.

• When unplugging, grip the power plug, not the cord.

• If any of the following occur, unplug the product from the outlet and conta ct authorized

service personnel:

o The power cord or supply is damaged
o Liquids of any kind have been exposed to the product
o The product has been dropped or the casing has been damaged
o The product is not performing as it should

• If the product won’t be used for a long period of time, unplug it

iii Safety Instructions

2. Exposure and Placement

• Only operate the product in moderate temperatures.

• Place the product indoors to avoid exposing it to lightening, rain or direct sunlight.

• Do not expose any liquids or sources of open flame (such as candle flame) to the

product.

• Do not place the product near any heat emitting applianc es. This may cause impairment
in cooling.

• Do not place the product on any unstable surface becaus e it may fall and cause serious
personal injuries and/or damage the product.

• Always make sure the product has enough space around it for ample ventilation and
heat transfer .

• Do not place the product in a closed space (such as a cabin et) without suitable
ventilation.

• Be sure to place the product approximately 10 cm away from any appliances that are
exposed to electromagnetic influences, such a s a TV.

• Do not use any attachments or accessories that are not recommended by the
manufacturer. This may cause hazards to the product, and will void the warranty..

3. Installation and Maintenance

• Before connecting or disconnecting the satellite cable to the product, be sure that the
product is unplugged. Failure to do so may cause dam age t o t he LNB.

• The LNB cable must be earthed to the system earth for the satelli t e dish.

• Before connecting or disconnecting the cable from t he TV, be sure that the product is

unplugged. Failure to do so may cause damage to the TV.

• Before cleaning the product, be sure that the product is unplugged.

• Use a damp cloth (do not use any solvents) to clean the ext erior of the product.

Safety Instructions iv

4. Warnings

• Do not use this product near any flammable or explosive gases as this increases the
risk of explosions.

• Do not use the product if any liquids or foreign objects co m e i n contact with it.

o Turn the product off, disconnect the power cord, and contact your dealer.
o Do not use the product since this could cause a fire or elect ric shock.

• Do not operate this product or hold the power cord with wet han ds as the risk of getting
electronic shock is very high.

• Unplug the product and disconnect the LNB cable duri ng a thunderstorm or when left
unattended and unused for long periods of time. This will prevent damage to the
product due to lightening and power-surges.

• Do not use this product when it is out of order. Continued use whe n defective can cause
serious damage to it and you.

• Do not put any alien items into or block the slots or ventilat i on openings of the product.
This can cause damage to the product and reduce the l i fe span.

5. Warranty

Be aware that any adjustments or handling (such as, but not limited to opening the casing) other
than what is specified here will void your warranty. Attempting to modify t he product may result
in fire, injury, electric shock, or other severe damage t o you or the product.

• Do not remove the cover, as there is risk of electric shock.

o If it is absolutely necessary, please contact a trained professional.

• Do not try to modify the product as this may cause fires, i njuries, electronic shocks or
other severe damage to you or the product.

5 Introduction

Chapter1.

Introduction

The XPEED LX2 digital receiver is fully compliant with the international Digital Video Broad­casting (DVB) standard, and thus is able to receive digital broadcasts of that standard.
For its operation you need an antenna, which must be installed appropriately.

1.1 Main Features

● 3300 MIPS Processor

● Linux Operating System

● Media Player

● Downloadable Plug-in supported

● 2 x Smartcard Readers

● 1 x Common Interface

● MPEG2 / H.264 Hardware Decoding

● 2 x DVB-S2 Tuners

● 8 character segment VFD

● 512MB NAND Flash

● 512MB DDR SDRAM

● 10/100MB Ethernet Interface

● 2 x USB 2.0

● RS-232

● HDMI

● 1 x SCART

● S/PDIF for digital bit stream out (optical)

● EPG supported

● Automatic & Manual Service Scan

supported

● Multiple LNB control (DiSEqC) supported

● Skin change supported

Chapter1. Introduction 6

1.2 Product Descriptions

Front Panel

①

Power : Power On

②

VOL▼ : Volume control

③

VOL▲ : Volume control

④

Display : Displays the current menu information

⑤

USB: Connect a USB storage device

⑥

Smartcard reader slot

⑦

IR / LED: IR Receiver and Indicator LED

⑧

CI Module slot