Golden Baby Ambulo Instruction Manual

Golden Baby

Ambulo

2 | P a g e

Ambulo

CONTENTS

INSTRUCTION MANUAL

SEAT AND BASSINET

Important Safety Information
Primary features
Opening the frame
Fitting and removing the rear wheels
Fitting and removing the front wheels
Operating the break
Operating the front wheels
Adjusting the shock absorber
Assembling the seat unit
Assembling the canopy
Assembling the hand rail
Adjusting the handle height
Adjusting the seat unit
Adjusting the bassinet
Using the safety harness
Folding the stroller/chassis

CARRY COT

Important Safety Information
Primary features
Assembling the carry cot
Fitting the carry cot
Operating the carry cot hood
Removing the carry cot

CAR SEAT

Fitting the car seat to the chassis
Removing the car seat from the chassis
Car seat options

ACCESSORIES

Rain cover
Mosquito net
Foot muff
Apron

GENERAL

Care and Maintenance
Warranty

Page

.....................................................................…...3

……………………………….……………………………………4

…………………………………………………………………..5

………..……………………………………5

…………………………………………….6

…………………………………………………………………6

…………………………………………………………7

……………………………………………………...7

……………………………………………………………8

……………………………………………………………..9

………………………………………………………….10

………………………………………………………10

…………………………………………………………….11

……………………………………………………………..12

………………………………………………………….13

………………………………………………………..14

……………………………………………………..15

…………………………………………………………………….16

………………………………………………………….17

………………………………………………………………..18

…………………………………………………….18

……………………………………………………………18

………………………………………………..19

………………………………………..20

…………………………………………………………………...20

…………………………….……………………………………………21

……………………………………………………………………….22

……………………………………………………………………………23

……..………………………………………………………………………...25

…………………………………………………………….26

…………………………………………………………………………….27

3 | P a g e

Ambulo

Important Safety Information

"Important – Keep these instructions for future reference

 WARNING Never leave your child unattended
 WARNING Ensure that all the locking devices are engaged before use
 WARNING To avoid injury ensure that your child is kept away when

unfolding and folding this product

 WARNING Do not let your child play with this product
 WARNING Use a harness as soon as your child can sit unaided
 WARNING This seat unit is not suitable for children under 6 months
 WARNING Always use the restraint system
 WARNING Check that the pram body or seat unit or car seat

attachment devices are correctly engaged before use

 WARNING This product is not suitable for running or skating

This pram/stroller is intended for children from newborn (1 month) and up to
maximum weight 15.0kgs.

 Adult assembly required. Never allow children to fold, assemble or

disassemble the pram/stroller.

 Do not use your pram/stroller if any part is broken, torn or missing.
 To avoid injury to fingers, take care when unfolding and folding the

frame.

 To avoid injury, never attempt to remove or adjust the seat unit when a

child is occupying the seat.

 Put the brake on whenever you park the pram/stroller.
 Do not let children play unattended near the pram/stroller.
 The pram/bassinet is only suitable for a child who cannot sit up unaided.
 Do not add a mattress other than the Ambulo mattress provided with the

product.

 Any load attached to the handle, affects the stability of the pram/stroller.
 The maximum load for the seatback storage pockets is 1Kg. Maximum

weight for storage basket is 2.5Kg. The pram/stroller may become
unstable if any of the manufacturer’s recommended loads are
exceeded.

 Do not inflate the rear wheels to more than 40PSI.
 Never use this pram/stroller for more than 1 child simultaneously.
 For car seats used in conjunction with a chassis, this vehicle does not

replace a cot or a bed. Should your child need to sleep, then it should
be placed in a suitable pram body, cot or bed.

 Only replacement parts supplied or recommended by the

manufacturer/distributor shall be used.

4 | P a g e

Ambulo

Handle

Canopy Support

Bars

Handrail

Canopy Bases

Seat Unit

Shock Absorber

40 PSI Tyre

Wheel Hub

Adjusting Spring
Rod

Handrail release Button

Frame release locks

Handle Adjustment
Button

Velcro Straps

Bassinet

Frame

Rear Wheel

Front Wheel

Storage Basket

Hinge

Central Adapter

Release Button

Seat Adjustment
Button

Canopy Cover

6Primary Features

5 | P a g e

Ambulo

Opening the Frame

 Open the frame clip on the strap.

 Place your foot on the rear axle tube to stabilise the chassis as

you lift the handlebar.

 Lift the handlebar until you hear an audible “click”. Confirm that

the frame is locked in the open position.

 Close the red frame safety lock to avoid unexpected folding of

the chassis.

Fitting and Removing the Rear Wheels

 Lift the brake to allow the wheel to be fitted.

 Insert the rear wheel axle until you hear an audible “click” to

confirm that the wheel is locked into position. Repeat for the
second wheel.

 Pull the wheel in the opposite direction to confirm that the wheel

has been fitted properly.

Red frame
Safety lock

Brake connecting lever

Frame Clip

6 | P a g e

Ambulo

Fitting and Removing the Front Wheels

 Insert the front wheel axle until you hear an audible “click” to

confirm that the wheel is locked into position. Repeat for the
second wheel

 Pull the wheel in the opposite direction to confirm that the

wheel has been fitted properly.

Operating the Brake

 To engage the brake, firmly press down with your foot on the

brake connecting lever.

 Check that the brake is fully engaged into the rear wheel before

letting go of the handle.

 To release the brake, lift up the brake connecting lever with your

foot until the wheels move freely.

7 | P a g e

Ambulo

Operating the Front Wheels

 The front wheels can be used in a swivel or fixed mode.

 To switch from swivel to locked, Press down the swivel wheel

lock levers with the wheels pointing as illustrated below.

 Lift the lever to return to the swivel-wheel position.

Adjusting the Shock Absorber

 Press down on the adjustable spring rods with your thumbs while

your forefingers are lifting against the wheel cover.

 Push the adjustable spring rods to the needed position.

1 2 3

Swivel position

Locked position

8 | P a g e

Ambulo

Assembling the Seat Unit

 Place the frame and seat cover as illustrated below.

 Unzip the zippers on each side.

 Place the central adapters through the holes on the seat cover.

 Close the 4 zippers

 Press and secure the Velcro straps at each end.

 Always secure the fasteners to the bassinet support bar.

 Close the 3 clips under the bottom of the seat unit as pictured.

 To fit the seat unit to the chassis: lower the central adapters into

the attachment devices and push down until it locks into position.

1

2

3

9 | P a g e

Ambulo

Assembling the Canopy

 Distinguish the inner and outer sides of the canopy bases.

 Install the canopy bases, as illustrated below.

 Insert the 2 canopy supports bars through the canopy cover.

 Insert the 2 canopy supports simultaneously to the canopy

bases.

 Fix the canopy cover to the seat with the elastic loops as

illustrated.

 Secure the back of the canopy cover over the top of the frame.

 To avoid injury remove the two canopy bases from the stroller

when the canopy is not in use.

Outer Inner