Gold Bond Futon BIFOLD FUTOR FRAME ALBANY Assembly Instructions Manual

Assembly

Instructions

BIFOLD FUTON FRAME

ALBANY

i

Seat Deck

Front Stretcher

1A

Parts in this box.

Chair size please note:

The Back Deck and Side Rails are already
assembled. Please skip instructions on Page 3.

Front Leg of Arm

Instructions apply to all sizes:

Chair
Love seat

Back Leg of Arm

Full/Double

Queen

1PA-1001

Back Deck

Back Deck Side Rail

Stretchers x 2

(Full size illustrated)

1B

Hardware in this box.

Barrel nuts

x 16

Allen Key

x 1

16mm Bolts x 4
For the Stretcher Backets.

60mm Bolts x 12
For the Side Rails and Back Leg.

Arms x 2

Stretcher Brackets

x 4

Clevis Pins

x 2

Side rails x 2

Locking Pins

x 2

Washers

x 2

Back Deck x 1

(Full size illustrated)

Seat Deck x 1

(Full size illustrated)

1C

1D

Full size only: Extra Parts.

Slat Supports x 2

30mm Bolts x 4

Queen size only: Extra parts.

Small Leg x 2

100mm Bolts x 4
For the Front Leg.

Wood Button

x 4

Wooden Dowel

x 4

50mm Bolts x 2

Page 1 of 4

Assembly Instructions

BIFOLD FUTON FRAME

Chair Full/Double

QueenLove seat

1PA-1001

2A

A.C.Insert the Stretcher

B. IMPORTANT: Don't

2C

Fasten Stretcher Brackets to Arm.

Bracket Cleat into
the hole provided.

fully tighten Bracket
until Stretchers are
all in place for easy
alignment.

Each arm requires
two brackets, front
and back.

Dowel Hole

Hole for Bolt
Hole for Cleat

Leg

Cleat

Stretcher
Bracket

Attach Arms to Stretchers.

16mm Bolt

Using Bolts and Barrel Nuts provided with the Arms,
attach the Arms LOOSELY to the Stretchers as shown..

It is important that these bolts are left LOOSE!

Allen Key

Stretcher
Bracket

2B

Middle
hole

Tap dowels all the way into the middle
hole at each end of the Stretchers.

Fit Wooden Dowels

Stretcher

Wooden Dowel

Bolts

Allen Key ­Leave bolts LOOSE!

Bolts

BOLT AND BARREL NUT
ASSEMBLY SYSTEM

Insert Barrel Nuts as shown
using a screwdriver. This will
help you position the Nut in
line with the Bolt.

Do not force the Bolt
as you may strip the
thread. Be sure the
thread is properly started.

Rear stretcher ( no plates )

Barrel Nuts

The Front Stretcher has metal plates which should face upwards.

Wooden Dowel

Allen Key

Bolt

Bolt

THIS END

FRONT

Bolts

Do not tighten
the Bolts at
this stage!

Be sure the holes are
free of wood chips
and saw dust.

Barrel Nut

Screwdriver

Page 2 of 4