Golander pump DT15-14, DT15-24, DT15-44, DT10-28, DT10-18 User Manual
...
GOLANDER PUMP
DT Pump Head User’s Guide
info@golanderpump.com
http://golanderpump.com
1-678-587-8806
DT Pump Head User’s Guide
1 Safety Cautions
Warning: Please read through this user’s guide carefully before
operating the pump head.
Danger: Remove the power from the pump before mounting or
unmounting pump head to the drive.
Danger: Remove the power from pump before attempting any
maintenance or any cleaning operation is started.
Danger: Turn drive off before removing or installing tubing. Fingers or
loose clothing could get caught in drive mechanism.
Warning: Tubing breakage may result in fluid being sprayed
from pump. Please check the tubing frequently and change the
tubing in time.
Warning: Please power the pump off before installing external control
devices.
Warning: This product is not designed for, nor intended for use in patient
connected applications; including, but not limited to, medical and dental
use.
Note:
• Only use matched tubing with the pump head to ensure optimum
performance. Use of other tubing may void applicable warranties.
• Release the cartridge if the drive stopped for a long time to prevent
the rollers from squeezing the tubing all the time.
• Change the squeeze section of the tubing in time to extend its
lifetime.
• When tubing breakage occurs, please use a mild detergent
solution to clean the pump head. Do not immerse nor use
excessive fluid. Please check if the rollers can still rotate smoothly.
If not, please stop the drive to prevent it from damaging the pump
head.
• Fine adjustment can be made to the gap between the roller and
the housing for the tubing. If the pump head can not deliver fluid
successfully or the output pressure is too weak, please try to
1
DT Pump Head User’s Guide
Max
Rate
DT15-14
1
0.62
DT15-24
2
1
DT15-44
4
1.44
Rate
DT10-18
1
0.72
DT10-28
2
0.78
DT10-48
4
1.08
DT10-88
8
1.68
reduce the gap by rotating the arm of the ratchet wheel until the
pump head delivers fluid as expected.
2 Introduction
DT series pump heads, including DT10 and DT15, are des igned for small
flow and medium fluid delivery. The cartridge is convenient to replace the
tubing. The DT10 pump head can fine adjust the occlusion to keep flow
rate consistence between the channels. PPS material case and stainless
steel rollers, More compact compared to multiple-channel YZ or YT pump
heads.
3 Specifications
DT15 (Rollers: 4, Roller Material：Stainless Steel, Cartridge Material: PPS)
Model
No. of
Channels
Max
Speed
600
rpm
Tubing
19# 16#
25# 17#
Flow
1600
mL/min
Weight
(kg)
DT10 (Rollers: 8, Roller Material：Stainless Steel, Cartridge Material: PPS)
Max
Flow
82
mL/min
Weight
Model
No. of
Channels
Max
Speed
100
rpm
Tubing
ID<3.17mm, Wall
thickness: 0.81mm, 13# 14#
2
Loading...