GoGo gate ISG TWS User Manual

WIRELESS DOOR SENSOR (ISG-TWS) INSTALLATION GUIDE

THIS SENSOR NEEDS A ISMARTGATE-PRO AND/OR ISMARTGATE-LITE DEVICE TO WORK.

Read instructions carefully before beginning

Please make sure your garage door is closed before you start installation.

The ismartgate product and our wireless door sensors are meant to be used with garage

door openers equiped with photo-eye safety sensors (manufactured after 1993). These

sensors are normally found at the bottom of your garage door and avoid accidental closing

of your garage door if an object or person is on the path of the door

.

TO PREVENT SERIOUS INJURY OR DEATH FROM
MOVING GARAGE DOORS OR GATES:

- DO NOT let children use the ismartgate product and app without adult supervision.

- ONLY Operate your ismartgate device when you are in clear view of your garage

the door. ALWAYS wait for garage door or gate to be completely closed.

- NEVER operate the remote access feature of your ismartgate without ensuring that

there is an adult physically present in front of the door or gate validating that it is safe

to start the remote operation of your device

1

Unscrew the 4 screws and place the batteries as per picture.

3

If you install the wireless sensor for the first time, follow the ismartgate
app instructions.
If you are replacing it, go to ismartgate app > Settings > Doors

GGG2-TWS-001SPECS

Frequency

Range

Operating Temperature

Battery type

Battery life span

Packaging

2.4 Ghz

50 m or 150 ft (open space)

-10ºC to 70ºC

N (x2)

2 years

Clamshell

CE - FCC

2

Always install your
wireless door sensors
with the garage doors in a
closed position. Put the
provided 2x Type N
batteries into the sensor.

Make sure you place the sensor
with the “TOP” label facing the
garage door ceiling.

Attach your wireless sensors to your garage door as per drawing below.

Place the sensors on the upper part of your garage door wall.

43 mm Width

92 mm
Lenght

26 mm
Height

Main sensor’s features:

• Remotely monitor if garage door is open or closed

• Check garage door temperature in ºC/ºF

• Receive real time alerts on your Smartphone

• Easy to install tilt sensor with double sided tapes

• Accelerometer to detect open/close positon

• Monitor sensor’s battery status for prompt replacement

• Keep track of all garage door events in a built-in calendar of events

Still having issues. No problem.

Download our user manual in our website www.ismartgate.com or
contact us at: [e-mail]

Modification statement

Remsol Europe has not approved any changes or modifications to this device by the
user. Any changes or modifications could void the user’s authority to operate the
equipment.

Interference statement (if it is not placed in the device)

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.

Wireless notice

This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This
transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.

FCC Class B digital device notice

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.