Go-Go Babyz UA105 User Manual
Urban Advantage® Stroller
Safety, Assembly & Operating
Instructions
Model #UA105
Go-Go Babyz Corporation
Warranty
EXPRESS LIMITED WARRANTY
Go-Go Babyz Corporation (“Go-Go Babyz”) warrants this product to be free from
defects in materials and workmanship for a period of one year from the date of
purchase. Go-Go Babyz will repair or replace, at its sole option, the defective
product within that one-year time period.
If you have a problem with your Go-Go Babyz product or are not satisfi ed with it,
please contact Go-Go Babyz Customer Service at 1.888.686.2552.
This express limited warranty does not cover:
(1) Pick-up, delivery, or freight charges.
(2) Corrosion caused by improper storage or failure to reasonably protect the
product from salt water and adverse conditions.
(3) Deterioration due to lack of maintenance and cleaning as specifi ed in the
product instructions.
Go-Go Babyz SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING FROM BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT. ANY IMPLIED WARRANTY,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, IS LIMITED TO THE DURATION OF
THE EXPRESS, LIMITED WARRANTY (ONE-YEAR FROM THE DATE OF
PURCHASE).
Under no circumstance shall any liability of Go-Go Babyz under this Express
Limited Warranty, or otherwise, exceed the price of the defective product or parts.
Note: Some states do not allow the exclusion or limitation on incidental or
consequential damages, so the above limitation may not apply to you. Some
states do not allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
This Express Limited Warranty gives you specifi c legal rights, and you may have
other rights, which vary from state to state.
CONTACT GO-GO BABYZ' CUSTOMER SERVICE FOR INFORMATION AND
ALL RETURNS:
Go-Go Babyz Returns
7011 Realm Drive, Suite A5
San Jose, CA 95119
408.360.0653
ii
WARRANTY
Before Assembly .............................................................................4
Assembling the Urban Advantage ..................................................5
How to Properly Use the Urban Advantage .................................. 10
Using the Urban Advantage as a Travel System ...........................13
Safety ..................................................................................... 14
FAQs .....................................................................................16
Troubleshooting .............................................................................18
Care and Maintenance ..................................................................20
Table of Contents
TABLE OF CONTENTS
iii
Before Assembling
PLEASE READ THOROUGHLY PRIOR TO ASSEMBLING THE
URBAN ADV ANT AGE.
REPORT SHIPPING DAMAGE IMMEDIATELY. IF YOUR STROLLER
WAS DELIVERED AND THE BOX APPEARS DAMAGED, PLEASE
INSPECT IT AND REPORT ANY DAMAGE TO GO-GO BABYZ BEFORE
THROWING AWAY YOUR BOX. GO-GO BABYZ WILL FILE A CLAIM
DIRECTLY WITH UPS OR OTHER FREIGHT CARRIER AND WILL
REPLACE THE STROLLER AT NO EXTRA COST. PLEASE CALL A GOGO BABYZ CUSTOMER REPRESENTATIVE AT 888.686.2552.
CUSTOMER SERVICE AT GO-GO BABYZ CAN USUALLY RESOLVE
ANY PROBLEM OR ANSWER ANY QUESTION YOU HAVE WITH ONE
PHONE CALL. PLEASE CALL US AT 888-686-2552 IF YOU HAVE ANY
PROBLEMS WITH THE STROLLER.
BEFORE ASSEMBLING4
GENERAL INSTRUCTIONS
FOR ASSEMBLING THE
URBAN ADV ANT AGE
STROLLER.
Assembly
Instructions
BEFORE ASSEMBLING YOUR STROLLER, PLEASE TAKE A FEW MINUTES TO READ THE
SAFETY WARNINGS AND OPERATING INSTRUCTIONS.
ASSEMBLY INSTRUCTIONS 5
Assembly
F ronont t whwheeeel
Instructions
Fr
Safety pins
are on both
sides of the
wheel.
1. Release locking latch.
Unfold the stroller. Make
sure both sides of the
frame lock into place.
Remove foam packing
tubes from rear axle/
brake.
!
WARNING: FRONT WHEEL COULD COME OFF AND INJURY
COULD RESULT IF SAFETY PINS ARE NOT ASSEMBLED PROPERLY.
3. Remove foam packing tubes from rear leg
tubes on the frame. Attach rear axle assembly
onto rear leg tubes by
inserting the left side a
little bit and then inserting the right hand side.
Press both of them
together until the spring
loaded buttons click into
place.
2. Lean the stroller backwards with the
front forks pointing up. Assemble the front
wheel as shown. Make sure safety pins
are placed in matching holes in frame on
both sides of the yoke. Tighten the lever on
the axle until it is very close to contacting
the fork then close the lever.
4. Remove plastic
packing tubes from the
rear wheel axle. Slide
wheel onto axle and
push until you hear a
click. Make sure it is
properly secure. Push
down on spring Clip if
necessary.
ASSEMBLY INSTRUCTION6
5. Line up holes in mounting bracket of
the brake cable, with hole in the post
of the brake bar. Insert bolt and tighten
. Make sure arrow on cable bracket is
nut
pointing up.
6. Test brake and kickstand. Kickstand
should have approximately 1" of clearance and be vertical. See instructions to
adjust kickstand or call Go-Go Babyz
for assistance if necessary.
7. Place parent tray onto metal
tubing above the canopy.
Assembly
Instructions Cont.
8. Place the front, child tray,
onto the metal tubing between
the foot rest and the center
locking mechanism.
ASSEMBLY INSTRUCTIONS
7
Loading...