1250 N. Arlington Heights Rd.
Suite 500
Itasca, IL 60143
Gogo LLC
814 Thorndale Avenue
Bensenville, IL 60106
JOSEPH TOBIN
ABS OPERATIONAL
DOCUMENT APPROVALS ARE ELECTRONIC
AND ARE MAINTAINED IN THE
CONFIGURATION MANAGEMENT DATABASE
SYSTEM (AGILE)
SIZE A CAGE CODE
1NQ67
The master version of this document resides on the Gogo LLC Configuration Management Server.
Printed copies are considered uncontrolled, until verified as current by comparing with the master. It is the responsibility of the user to verify the
most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
USER’S MANUAL
DOCUMENT NUMBER
D12751
REV
F
SH 1 OF 30
Change History
Revision Date Description of Change Approval
A 2008-01-16 New/Initial Release Brad Schnair
B 2008-02-21 Added menu-based software reset, section 12 Brad Schnair
C 2008-08-18 ABS Master Switch: Added statement
regarding system start-up time
Section 4 - Placing a Call: Added statement
regarding availability of Direct Dialing
Section 10 - Setup Menu, Option 2 ABS Status:
Added description of features now available
Section 11 - ABS Corded SIP Handset Icons:
Added description of ABS Link Status Icon
D 2008-11-20 ABS Master Switch: Removed reference to
switch illumination
Section 1 - Powering On: Added statements for
Rev E (or earlier) handsets and Rev F (or later)
handsets
Section 1 - Added instructions for powering Off
Section 2 - Idle Displays: Added description of
Display Blanking and recovery
Section 4 - Placing a Call: Added instructions
for ending a direct-dialed call that has been
blocked
Section 7 - Receiving a Call: Added statement
regarding the availability of incoming calls
Brad Schnair
Brad Schnair
Section 10, Option 1, Item 6 - Display Blanking
Timer: Added statement that the “Never”
option is not recommended
Section 13 (new) - Comm Control Menu:
Inserted section that adds description of FCN 8
menu for control of WiFi SSIDs
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 2 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
Change History (continued)
Revision Date Description of Change Approval
E 2010-04-15 Section 1 - Replaced Display #1 picture with
“Axxess” boot screen
Section 1 - Removed note about display
blanking during handset boot-up
Section 1 - Added guidance that handsets may
power off during brief power interruptions
Section 2 - Deleted references to TM radio link
Sections 2, 4, and 7 - Added guidance that
phone calls are not supported below 10,000
feet AGL
Section 12 - Changed section name from
“Handset Software Reboot” to “Handset
Reboot”. Added preferred handset reboot
method for Revision F (or later) handsets.
Removed the previous revision’s Section 13
“Communication Control Menu” and set the
FCN 8 menu status back to “For Future Use”
F 2014-12-31 Updated Template
Replaced Aircell with Gogo
Pg 4 - Removed Aircell Logo
Brad Schnair
Joseph Tobin
Pg 6 - Added Transmitter Section
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 3 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
ABS Operational
User’s Manual
Revision F
Dec 31, 2014
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 4 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
3.Locking and Unlocking the Handset .............................................................................................. 12
4.Placing a Call .................................................................................................................................... 13
6.Ending a Call .................................................................................................................................... 14
7.Receiving a Call ................................................................................................................................ 15
9.Volume and Brightness .................................................................................................................... 17
10.Setup Menu ....................................................................................................................................... 19
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
Transmitters
The ABS Systems may contain the following transmitters:
These transmitters have received appropriate regulat ory certifications beyond the required civil
aviation certifications, e.g. FCC, IC, CE. In order to insure proper operation under these
certifications, the end user is not able to modify or re-configure any of the devices, m odify
cabling, or change antenna locations without Gogo’s written instructions to do so. Contact Gogo
for any configuration changes. Unauthorized changes may void the certifcation of the products.
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 6 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
ABS Master Switch
The ABS Master Power Switch is utilized to enable and disable the ABS System. It is located within the cabin in a
location accessible by the flight crew. When the Master Power Switch is disabled, power is removed from all
components of the ABS System. When the Master Power Switch is enabled, power is applied to all components of
the ABS System. After power is applied to the ABS system, it may take up to 15 minutes for the system to become
operational.
ABS Breakers
The ABS system contains breakers that can be used to disable the ABS System. The breakers are located within
the flight deck for access by the flight crew. Refer to aircraft specific flight manual supplement on location of the
breakers.
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 7 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
ABS Corded SIP Handset
The Gogo ABS Corded SIP Handset (“the handset”) is a full-sized handset used to support Air-to-Ground
telephone communications when using the Gogo ABS system. The handset is also capable of displaying ABS
system status and controlling a limited number of ABS system functions.
The handset approximate dimensions are: 7.8” Length, 2.1” Width, 1.8” Height, not including the coil cord.
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 8 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
Gogo ABS Corded SIP Handset
1.Powering On and Off
Powering ON
Handsets of Revision F (or higher): After ABS system power is applied, press and hold the SND key on the
handset until the screen illuminates.
Handsets of Revision E (or lower): The handset automatically powers on when ABS system power is applied.
While the handset is initializing (approximately 20 seconds), the following screen will be displayed:
Display #1 - Initializing
After initialization, the handset will attempt to register with the Aircell VoIP server. During this process, one of two
screens will be displayed depending upon whether or not the handset has been locked. (See section 3 for details
on handset locking and unlocking.)
Unlocked: The handset is attempting to connect to the Aircell VoIP server. Phone calls are not supported
while this screen is displayed, but the Setup Menu is accessible.
Display #2 - Handset is unlocked, Waiting to connect to VoIP Server
Locked: Whenever the handset is locked, this screen is displayed. Usage of the handset is prevented until
the handset is unlocked.
Display #3 - Handset is locked
Itasca, IL
Bensenville, IL
SIZE
A
CAGE CODE
1NQ67
DOCUMENT NUMBER
D12751
REV
F
SH 9 of 28
Title: ABS OPERATIONAL USER’S MANUAL
The master version of this document resides on the Gogo LLC Configuration Management Server. Printed copies are considered uncontrolled,
until verified as current by comparing with the master. It is the responsibility of the user to verify the most current revision.
Template D13480, Rev E
Gogo LLC Confidential and Proprietary
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.